Display Hidden Notes to Specifier. (Don't Know How? Click Here) s48

SECTION 10 31 07

GAS FIREPLACES

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** Majestic; gas fireplaces fireplaces.
This section is based on the products of Majestic, which is located at:
7571 215th St. W.
Lakeville, MN 55044
Toll Free Tel: 800-927-6841
Email:request info ()
Web:www.majesticproducts.com
[Click Here] for additional information.
For over 50 years, Majestic has stood for outstanding durability, stunning looks and long lasting performance in wood and gas fireplaces. And with a wide range of beautiful styles, sizes and trims, Majestic products are made to blend seamlessly with your decor while still making a statement of impeccable taste.
From gorgeous, blazing wood burning fireplaces to gas and electric stoves and inserts, Majestic has the style and quality you're looking for. Traditional to contemporary. Indoor or outdoor. Wood, gas or electric. Majestic products are designed to be the heart of your home. Each Majestic fireplace is engineered for performance, style and lasting durability. We pride ourselves on strict engineering guidelines and rigid quality assurance testing, to be sure we are putting the best product we can into your home.
Beyond just safety and aesthetics, Majestic products are built to be efficient, quality heating appliances, adding value to your home for years to come. It's why, for decades, Majestic has been the fireplace of choice for homes all across North America.

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

A. Gas fireplaces and accessories including the following:

1. Interior single-sided gas fireplaces.

2. Interior multi-sided gas fireplaces.

3. Interior gas fireplace inserts.

4. Indoor/outdoor multi-sided gas fireplaces.

5. Outdoor single-sided gas fireplaces.

6. Outdoor multi-sided gas fireplaces.

7. Cast stone trim.

8. Flush wood mantels.

9. Shelf wood mantels.

10. Shelves.

11. Flat wall cabinets.

12. Flat wall base.

13. Corner cabinets.

14. Stone for fireplaces.

15. Cast and cast stone for fireplaces.

16. Gas fireplace accessories.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

A. Section 04 20 00 - Unit Masonry.

B. Section 06 10 00 - Rough Carpentry.

C. Section - .

D. Section 22 11 13 - Facility Water Distribution Piping.

E. Section 26 05 00 - Common Work Results for Electrical.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

A. ANSI Z21.44 - Gas-Fired Gravity and Fan Type Direct Vent Wall Furnaces.

B. ANSI Z21.50 - Vented Decorative Gas Appliances.

C. ANSI Z21.88 - Vented Gas Fireplace Heaters.

D. ANSI Z97.1 - Tempered Glass Requirements.

E. ANSI 70 - National Electric Code.

F. ASTM E283 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen.

G. ASTM E330 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference.

H. ASTM E331 - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference.

I. Z21.50b - Vented Gas Fireplaces.

J. ANSI Z223.1 - National Fuel Gas Code.

K. CSA 2.22b - Vented Gas Fireplaces.

L. CSA 2.33 - Vented Gas Fireplace Heaters.

M. CAN/ULC S610 - Factory-Built Fireplaces.

N. UL 127 - Standard for Factory-Built Fireplaces.

O. UL 907 - Standard for Fireplace Accessories

P. UL 1482 - Standard for Safety for Solid-Fuel Type Room Heaters.

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Installation methods.

C. Shop Drawings: Provide drawing of required clearances, rough-in of enclosure and utilities.

D. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square representing actual product.

1.5 QUALITY ASSURANCE

A. Manufacturer Qualifications: Minimum 5 year experience manufacturing similar products.

B. Installer Qualifications: Minimum 2 year experience installing similar products.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

C. Multiple Installation Mock-Up: Provide a mock-up for evaluation of site and framing preparation techniques and installation workmanship.

1. Provide representative fireplace in area designated by Architect.

2. Do not proceed with remaining units until workmanship, installation and operation are approved by Architect.

3. Rebuild mock-up unit as required to produce acceptable work.

1.6 PRE-INSTALLATION MEETINGS

A. Convene minimum two weeks prior to starting work of this section.

1.7 DELIVERY, STORAGE, AND HANDLING

A. Deliver and store products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation.

B. Handling: Handle materials to avoid damage.

1.8 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.9 SEQUENCING

A. Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

1.10 WARRANTY

A. Warranty: Provide manufacturer's standard warranty against defects in materials and workmanship.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Majestic, which is located at: 7571 215th St. W.; Lakeville, MN 55044; Toll Free Tel: 800-927-6841; Email:request info (); Web:www.majesticproducts.com

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

** NOTE TO SPECIFIER ** Delete if not required.

2.2 FIREPLACE - GAS - SINGLE-SIDED

A. Compliance - General:

1. Comply with applicable building codes.

2. Comply with UL 307B, ANSI Z21.88/CSA 2.33 or Z21.50b/CSA 2.22b.

** NOTE TO SPECIFIER ** Delete if conformance with Canadian standard if not required.

3. Comply with CSA 2.33.

** NOTE TO SPECIFIER ** Delete if not required.

B. Echelon II Series - Single Sided Gas Fireplace:

1. Clear LED Lights.

2. IntelliFire Plus ignition system.

3. Battery backup.

4. Controls: RC300.

** NOTE TO SPECIFIER ** Delete finishing package not required.

5. Finishing Package: Clean face trim - Black.

6. Finishing Package: Clean face trim - Bronze.

7. Finishing Package: Clean face trim- Pewter.

8. Finishing Package: Picture frame front - Black.

9. Finishing Package: Picture frame front - Pewter.

10. Finishing Package: Reflective black ceramic glass liner.

** NOTE TO SPECIFIER ** Delete media not required.

11. Media: Glass Media, Sapphire.

12. Media: Glass Media, Bronze.

13. Media: Glass Media, Diamond.

14. Media: Glass Media, Onyx.

15. Media: Natural stones.

16. Log Set: Driftwood log set.

** NOTE TO SPECIFIER ** Delete if not required.

17. Liner: Reflective black ceramic glass liner.

** NOTE TO SPECIFIER ** Delete heat management not required.

18. HEAT-DUCT: Home heat distribution kit - heat distributions via home furnace air handler (includes fan, 20 feet (6096 mm) of 6 inches (152 mm) round duct, vent, adaptor, and adjustment control).

a. HEAT-ZONE-TOP: Required adapter for HEAT-DUCT. Refer to installation manual for additional framing requirements.

19. HEAT-ZONE-GAS: Heat-Zone Kit (includes fan, 20 feet (6096 mm) of 6 inches (152 mm) round duct, vent and on/off control)

a. HEAT-ZONE-TOP: Required adapter for HEAT-ZONE-GAS. Refer to installation manual for additional framing requirements.

** NOTE TO SPECIFIER ** Delete models not required.

20. Model: Echelon II Single-Sided 36:

a. Size: Unit Front Width: 46-3/16 inches (1173 mm). Framing Front Width: 48-1/4 inches (1226 mm). Unit Back Width: 46-3/16 inches (1173 mm). Framing Back Width: 48-1/4 inches (1226 mm). Unit Height: 41-3/4 inches (1060 mm) Framing Height: 42 inches (1067 mm). Unit Depth: 17-1/8 inches (453 mm) Framing Depth: 18-1/4 inches (464 mm). Glass Size: 35-1/2 inches x 12-1/2 inches (902 mm X 318 mm).

b. BTU/Hour Input: 17,500 - 30,000 Btu/Hour Input (NG), 15-000 - 27,000 Btu/Hour Input (LP).

21. Model: Echelon II Single-Sided 48:

a. Size: Unit Front Width: 58 inches (1473 mm). Framing Front Width: 60-1/4 inches (1530 mm). Unit Back Width: 58 inches (1473 mm). Framing Back Width: 60-1/4 inches (1530 mm). Unit Height: 41-3/4 inches (1060 mm) Framing Height: 42 inches (1067 mm). Unit Depth: 17-1/8 inches (435 mm) Framing Depth: 18-1/4 inches (464 mm). Glass Size: 47-1/2 inches x 12-1/2 inches (1207 mm X 318 mm).

b. BTU/Hour Input: 21,000 - 40,000 Btu/Hour Input (NG). 20,000 - 34,000 Btu/Hour Input (LP).

22. Model: Echelon II Single-Sided 60:

a. Size: Unit Front Width: 70 inches (1778 mm). Framing Front Width: 72-1/4 inches (1835 mm). Unit Back Width: 70 inches (1778 mm). Framing Front Width: 72-1/4 inches (1835 mm). Unit Height: 47-3/4 inches (1213 mm) Framing Height: 48 inches (1219 mm). Unit Depth: 17-1/8 inches (4350 mm) Framing Depth: 18-1/4 inches (464 mm). Glass Size: 59-1/2 inches x 12-1/2 inches (1511 mm X 318 mm).

b. BTU/Hour Input: 28,000 - 50,000 Btu/Hour Input (NG). 20,000 - 37,500 Btu/Hour Input (LP).

23. Model: Echelon II Single-Sided 72:

a. Size: Unit Front Width: 82 inches (2083 mm). Framing Front Width: 84-1/4 inches (2140 mm). Unit Back Width: 82 inches (2083 mm). Framing Front Width: 84-1/4 inches (2121 mm). Unit Height: 47-3/4 inches (1213 mm) Framing Height: 48 inches (1219 mm). Unit Depth: 17-1/8 inches (435 mm) Framing Depth: 18-1/4 inches (464 mm). Glass Size: 71-1/2 inches x 12-1/2 inches (1816 mm X 318 mm).

b. BTU/Hour Input: 30,000 - 58,000 Btu/Hour Input (NG). 25,000 - 45,000 Btu/Hour Input (LP).

** NOTE TO SPECIFIER ** Delete if not required.

C. Marquis II - Single Sided Gas Fireplace:

1. IntelliFire Touch ignition.

2. LED accent lighting.

3. ClearView ceramic glass.

4. Ceramic fiber split logs.

5. Gas flex connector.

6. Junction box.

7. Controls: RC400. Touchscreen remote.

** NOTE TO SPECIFIER ** Delete finishing package not required.

8. Finishing Package: Firescreen Front - Black.

9. Finishing Package: Firescreen Front - Bronze.

10. Finishing Package: Firescreen Front - Pewter.

** NOTE TO SPECIFIER ** Delete panels not required.

11. Panels: GLMQ hearth brick and top with reflective black glass walls.

12. Panels: Brick interior panels - Tavern Brown.

13. Panels: Brick interior panels - Tavern Brown herringbone.

14. Panels: Brick interior panels - Cottage Red.

15. Panels: Reflective black glass walls (required hearth brick and top).

** NOTE TO SPECIFIER ** Delete heat management not required.

16. HEAT-DUCT: Home heat distribution kit - heat distributions via home furnace air handler (includes fan, 20 feet (6096 mm) of 6 inches (152 mm) round duct, vent, adaptor, and adjustment control).

17. HEAT-ZONE-GAS: Heat-Zone Kit (includes fan, 20 feet (6096 mm) of 6 inches (152 mm) round duct, vent and on/off control).

** NOTE TO SPECIFIER ** Delete models not required.

18. Model: Marquis II 36 Single-Sided:

a. Size: Unit Front Width: 61 inches (1549 mm). Framing Front Width: 59-1/2 inches (1511 mm). Unit Back Width: 59-1/4 inches (1505 mm). Framing Back Width: 59-1/2 inches (1511 mm). Unit Height: 57-5/8 inches (1464 mm) Framing Height: 56 inches (1422 mm). Unit Depth: 24 inches (610 mm) Framing Depth: 24 inches (610 mm). Glass Size: 35-7/8 inches x 31-1/16 inches (911 mm X 789 mm).

b. BTU/Hour Input: 2 25,000 - 44,000 Btu/Hour Input (NG). 24,000 - 43,500 Btu/Hour Input (LP).

19. Model: Marquis II 42 Single-Sided:

a. Size: Unit Front Width: 67 inches (1702 mm). Framing Front Width: 65-9/16 inches (1665 mm). Unit Back Width: 65-5/16 inches (1659 mm). Framing Back Width: 65-5/16 inches (1659 mm). Unit Height: 62-5/8 inches (1591 mm) Framing Height: 61 inches (1549 mm). Unit Depth: 24 inches (610 mm) Framing Depth: 24 inches (610 mm). Glass Size: 41-7/8 inches x 39-1/16 inches (1064 mm X 992 mm).

b. BTU/Hour Input: 30,000 - 54,500 Btu/Hour Input (NG). 23,500 - 47,500 Btu/Hour Input (LP).

** NOTE TO SPECIFIER ** Delete if not required.

D. Mercury 32- Single Sided Gas Fireplace:

** NOTE TO SPECIFIER ** Delete model if not required.

1. Model: Mercury Direct Vent Gas Fireplace, top/rear vent with Intellifire (NG).

2. Model: Mercury Direct Vent Gas Fireplace, top/rear vent with Standing Pilot (NG).

3. Model: Mercury Direct Vent Gas Fireplace, top/rear vent with Standing Pilot (LP).

4. Model: Mercury Direct Vent Gas Fireplace, top/rear vent with Intellifire (LP).

** NOTE TO SPECIFIER ** Delete control if not required.

5. IntelliFire Touch ignition.

6. Ceramic fiber logs.

7. Glowing embers.

8. Full fire screen front and hood.

9. Tempered glass.

10. Battery backup.

11. Junction box.

12. 12 feet (3658 mm) control wire.

** NOTE TO SPECIFIER ** Delete control types not required.

13. Controls: IPI Remote Control Wall Switch (on/off, fan speed, flame control, temperature readout, thermostat mode, timer mode).