TT Klavesnice, a.s.,

Hruskove Dvory 56,

586 01 Jihlava

Czech Republic

Instructions for filling out this form:
- Use a mouse and a keyboard to fill out individual fields step-by-step
- Fill out only grey form fields (check boxes, text fields), in background-coloured sections
- You need not fill out all fields
- You can move between individual fields by means of the mouse or a tabulator key
- Click with a mouse over a checkbox, or hit a space key to tick the check box
- Uncoloured sections are to be filled out by that specialist of TT Klavesnice, who will prepare the quotation
- Send the filled-out form by fax to (00420) 567 113 522, or by e-mail to
Specification for: / New design
Re-design / Original Part Number:TS
New Part Number: / TS 523
Company:
Name: / Phone:
Fax:
E-mail:
Order Number: / CAD:
Quotation requested: / Yes / Submit quotation before:
Quantities to be quoted: / pc / pc / pc / pc / pc
Required delivery date:
Dimensions: / Height / mm / Width / mm / Radius / mm
Number of keys:

Including sub-panel

/ Yes / Bond Membrane Switch to panel / Yes
Notes
Graphic overlay: / Matt - textured / Glossy
Polyester / 150 m / 200 m / 130 m / 180 m
Polycarbonate / 125 m / 250 m / 175 m / other
Other

Insertable legend pockets

- On the keys / - Beside the keys
Pocket entrance: / - through graphic layer / - from behind / - from perimeter
Embossing and tactile response
- Non-tactile switch
Flat / / Embossed (a rim around keys)
- Polydome tactile switch (embossed graphic overlay)
Pillow emboss / / Key diameter / 7 mm / 10 mm
- Metal dome tactile switch
Flat /
Pillow emboss / / Key dia
Other emboss / / / Dimensions of keys
- Others
Graphics, colours:
Please list all colours to be printed (best from RAL, Pantone matching systems)
1. / 8.
2. / 9.
3. / 10.
4. / 11.
5. / 12.
6. / 13.
7. / Texturing ink (for glossy films):
Register of colours / Total number of prints:
Windows
LED Windows / LCD Windows
Transparent / pc / Transparent / pc
Red / pc / Red / pc
Green / pc / Green / pc
Yellow / pc / Yellow / pc
Blue / pc / Blue / pc
Orange / pc / Orange / pc
Smoky grey / pc / Smoky grey / pc
Screen gloss coat over LED windows:
Screen gloss coat over LCD windows:

Shielding and embedded SMT components

Shielding

/

Yes

/ Specification

Embedded SMT components (LEDs, resistors …)

Red LED / pc / Bicolour LED / pc
Green LED / pc / Colour / and
Yellow LED / pc / Colour / and
Blue LED / pc / Pinouts of bicolour LEDs (e.g. common ANODE):
Another LED / pc
Other SMD / pc
Other SMD / pc
Specifications / Specifications of pinouts and location has been supplied

Flax-tail

Tail insulation / insulation ink / insulation film / flax-tail stiffened
Conductive traces centreline / 2.54 mm / 1.27 mm / 1.00 mm
Tail termination / pin
(only for ctr 2.54) / socket (AMP) (only for ctr 2,54) / ZIF connector
Position of crimped sockets / on top / / behind /
Flex-tail exit point and length
Exit at the perimeter / Exit at the back
Tail length (w/o termination) / mm / Tail length (w/o termination) / mm
Pinout
Pinout specification:
Common bus
Electric scheme
X-Y matrix (arrangement is optional)
X-Y matrix (specified)
The first contact of the connector is specified
Contact arrangement is specified
Specified contact arrangement must be respected
Subpanel Specification
Material: / Surface treatment:
Dimensions:
Cutouts: / Number / Dimension / Number / Dimension / Number / Dimension
x / mm / x / mm / x / mm
x / mm / x / mm / x / mm
Studs: / x / mm / x / mm / x / mm
x / mm / x / mm / x / mm
Submitted documents
Drawings - Hard copies / Electronic files / Negatives
Electronic drawings: (If they are not clear, submit also a drawing with basic dimensions):
The submitted documents must be in vector graphics formats. It is not possible to process bitmap files.
Convert used fonts to curves, or attach the fonts to submitted documents.
CorelDraw (5-11) / AutoCad LT (*.wmf,dxf) / Others / Format
The drawings include:
- Outer dimensions and corner radii
- Position and size of keys including radii and width of rims
- Position and size of LED- and LCD-windows including radii and width of borders
- Position and size of legends, symbols and digits
- Position and size of logos
- Position and shape of cutouts
- Position and size of legend pockets

Other specifications:


Notes: YESEnter relevant data (Number of pieces, texts etc.)


NO Send the filled out form by fax to (00420) 567 113 522, or by e-mail to