Team Name: ______
Lab Section: ______
CHECKLIST (Semester – Piping, Fittings & Hardware)
POINTS TO NOTE:
- You have to get this signed by your Instructor/TA when you return the equipment issued to you at the end of the quarter.
- This sheet has to be attached to your project notebook when you turn it in for final evaluation.
- The penalty for not getting it signed is that you will receive an incomplete until all equipment is returned or replaced and this form is turned in with instructor/TA signature.
- Note: Lost or damaged items must be paid for[1].
- To make this process easier make sure that you assign this responsibility to one of your team members.
- This person would have to ensure that either the instructor or teaching assistant signs this document before they leave the lab on the last day.
- Note: All the team members would be held responsible for lost or misplaced items.
Item Description / Quantity / Checked Out / Checked In
CPVC Pipe & Fittings, ½”
18” Pipe / 12
12” Pipe / 16
6” Pipe / 30
4” Pipe / 30
3” Pipe / 20
2” Pipe / 20
Tee / 50
Coupling / 24
90˚ Drop-Ear Elbow / 16
90˚ Elbow / 16
Snap-Fits & Hardware
Snap-Fits / 90
¼” OD Poly Tubing, 25’ / 2
Nylon Loop Straps / 35
Thumb Screws / 35
Square Nuts / 35
Washers / 35
25.4mm Nylon Ball / 1
Instructor/TA Signature
______
Honor Code:
By signing below you acknowledge that you have read and understood the information provided and assume responsibility for the items issued to you. Failure to abide by the rules would be considered as academic misconduct and will be handled according to university rules and regulations.
Team Members: (Please sign and print your name in the space provided)
x______x______
( )( )
x______x______
( )( )
[1] Please contact Stuart Brand (HI 215) or Mike Hoffmann (HI 215) for more information about lost or damaged items policy.