MONTERO EXPANSION JOINT INQUIRY
COMPANY: ______
DEPARTAMENT______
CONTACT PERSON______EMAIL______
TEF.______FAX______
PROJECT NAME______DRAWING Nº ______
PLACE OF INSTALLATION
OUTSIDE ٱ INSIDE ٱ
NEW INSTALLATION ٱ REPLACEMENT ٱ
TYPE OF INSTALLATION ( DESCRIPTION ) :
MONTERO
Tel. + 34-94 418 00 11 Fax. + 34-94 418 91 83
e-mail: http://www.monterofye.com
1 16/01/2014
MONTERO EXPANSION JOINT INQUIRY
WORKING CONDITIONS
MAXIMUM TEMPERATURE :
MAXIMUM PRESSURE :
AMBIENT TEMPERATURE :
TYPE OF MEDIUM :
COMPOSITION :
FLOW VELOCITY ( m/s.) :
HUMIDITY :
EXPANSION JOINT DATA
MOVEMENT ( mm .)
AXIAL COMPRESSION: ELONGATION:
RADIAL COMP.: ELONG.:
TORSION :
VIBRATION : CYCLES :
OTHERS : ______
MONTERO
Tel. + 34-94 418 00 11 Fax. + 34-94 418 91 83
e-mail: http://www.monterofye.com
1 16/01/2014
MONTERO EXPANSION JOINT INQUIRY
- TYPE OF EXPANSION JOINT :
FLANGED ٱ CLOSED BELT ٱ OPEN BELT ٱ OPEN BELT READY TO FIX ٱ
- DIMENSION OF EXPANSION JOINT :
LENGTH ( mm.) :
WITDH ( mm.) :
- COMPOSITION EXPANSION JOINT ( INSIDE LAYER OUTSIDE ) :
- ______
- ______
- ______
- ______
- INSULATION :
NO ٱ YES ٱ ( TYPE OF INSULATION: ______MEASURE:______)
- HOLES REQUIRED : ( Drawing required )
NO ٱ YES ٱ ( DIAMETER OF HOLE ______NUMBER:______)
DUCT DESIGN ( Drawing required )
-DEFLECTOR / BAFFLE / SLEEVE : ( Drawing required )
NO ٱ YES ٱ ( TYPE OF DEFLECTOR: ______MEASURE:______)
- TYPE OF DUCT ( DUCT SECTION ) : ( Drawing required )
ROUND ٱ SQUARE ٱ others ٱ ______
1. BELT TYPE CONNECTION ٱ
1.1 DIRECTLY ON THE PIPE ٱ
1.2 BUILT OUT OF THE DUCT ( EXTENDED FROM THE PIPE ) ٱ
2. FLANGED TYPE CONNECTION ( VERTICAL FLANGE CONNECTION ) ٱ
2.1 ROUND SECTION ٱ
2.2 SQUARE SECTION ٱ
SUPERVISING OF THE INSTALLATION REQUIRED : NO ٱ YES ٱ ( OFFER Nº______)
FASTENING ELEMENTS REQUIRED: NO ٱ YES ٱ ( TYPE,, QUANTITY, QUALITY, )
MONTERO
Tel. + 34-94 418 00 11 Fax. + 34-94 418 91 83
e-mail: http://www.monterofye.com
1 16/01/2014