DELTA 1600 Vdelta 65DF 252DM 401DM 9200

300CO

300HC

top

A

AQ 100

top

D

DELTA 1600 S

DELTA 1600 VDelta 65DF 252DM 401DM 9200

top

H

HD 100 S

top

L

LV 100 S

top

M

MGA 5

MGA 5Plus

top

N

Nova 2000

top

O

OMS 420

OMS 420 HTOMS 420 RTOptima 7OpTrans 1600

top

S

SWG 200-1

SWG 200-1 BiogasSWG 300-1

top

T

TK 102 S

TOM 420 R

top

V

VarioPlus Industrial

VarioPlus SEVT 100 SVT 200

300CO

Reliably and quickly detects toxic carbon monoxide

in the ambient air.

Alarm: acoustic signal and flashing display.

Basic Equipments

·  Large, well legible display

·  Compact housing w/ dirt resistant keypad

·  Battery operated

·  IR - Printer interface

Technical Data

Measuring ranges
Measuring range / 0 ... 300ppm

· 

Dimensions and other data
IR-Schnittstelle zum Drucker
Battery capacity / appr. 1.000h
Weight / appr. 230g
Dimensions / 84 x 139 x 24mm

300HC

Perfectly suitable to locate gas leakages in the installation area.

With means of the flexible sensor neck, the sensor can be introduced to areas difficult of access.

Alarm: acoustic signal and flashing display.

Basic Equipments

·  Large, well legible display

·  Compact housing w/ dirt resistant keypad

·  Battery operated

·  IR - Printer interface

Technical Data
Measuring ranges
Measuring range / 0 ... 30.000ppm
Dimensions and other data
Battery capacity / appr. 8h
Weight / appr. 230g

AQ 100

Air quality measuring unit
for continuous monitoring of CO2 in ambient air and indication of temperature.
Basic Equpments
·  - display 2 lines, LCD technology. Size 50 x 34.9 mm. 1 line of 5 digits with 7 segments (value)1 line of 5 digits with 16 segments (unit).
·  - Selection of units.
·  - Minimum and maximum values.
·  - HOLD function.
·  - Adjustable automatic shut-off.
·  Adjustable backlight.
·  Power suppy via 9V battery.
Technical Data
Measuring ranges
Temperature / -20 ... +80°C
Dimensions and other data
Display / large, well illuminated LCD - Display
Weight / 190g
DELTA 1600 S
OIML - Standard
Most compact and light weight exhaust gas measuring instrument with NDIR - technology.
Continuous analysis of CO - CO2 - HC, optional O2 and NO.
Rechargeable battery for 4 hours mains free operation.
Useable also as remote control unit of diesel exhasut opacity monitor OPTRANS 1600.

Basic Equipments
·  Unit with leather protection cover.
·  Rechargeable battery and battery charger.
·  400 mm flexible probe w/ viton line.
·  IR - printer interface.
·  Data memory und PC- interface.
·  Condensate trap and filter.
Technical Data
Measuring ranges
CO / 0 ... 10%
CO2 / 0 ... 16%
O2 / 0 ... 22%
NO / 0 ... 1000ppm
HC / 20000ppm
Dimensions and other data
Display / 4 lines, with backlight
Weight / apr. 1.000g
TÜV approval
DELTA 1600 V
Portable car exhaust gas analyser, including sample conditioner with
gas cooler, condensate pump, gas sampling pump,
gas filter and integral rechargeable batteries,
protective nylon transport case and flexible gas sampling probe.

Basic Equipment
·  Automatic internal test and control of soft- and hardware functions.
·  Large, high-contrast and backlit graphical display with zoom function.
·  All measured data at one sight.
·  Individual, user definable display and printout settings.
·  RS 232 interface and data memory for approx. 7500 measurements.
·  Integrated, electrical gas cooler (Peltier cooler) and automatic condensate pump (peristaltic pump).
·  Automatic zeroing by means of 3-way solenoid valve and activated carbon filter.
·  Integrated high-speed thermo printer with easy paper loading.
·  Universal analog input (AUX socket) for data log of external RPM meter.
·  Universal power supply: mains 90-264 Vac / 100 W, alternatively external 12 Vdc power supply.
·  2 hour battery operation, additional 4 hours by means of optional external battery.
·  Grid power supply cable or optional 12Vdc external power supply cable.
·  Adjustable shoulder strap.
·  Gas sampling probe with: flexible probe tube 400mm, hose in-line filter.
Technical Data
Measuring ranges
CO / 0 ... 10%
CO2 / 0 ... 20%
O2 / 0 ... 22%
NO / 0 ... 4.000 ppm
NO2 / 0 ... 1.000ppm
CxHy / 0 ... 2.000ppm
Dimensions and other data
Display / 10 - lines, backlit graphical display
Weight / appr. 10kg
Dimensions / 530x490x310mm

Delta 65

Small, robust Single-Gas analyzer using electrochemical sensors.

Data memory and USB or Bluetooth interface to PC.

Battery- and mains operated.

Basic Equipments

·  Protection cover w/ fixing magnet and optimised condensate trap

·  180 mm (or longer) probe w/ 1,5 m sample line

·  O2- and CO-sensor

·  On request, single gas analyzer for O2 , CO , NOx , H2S , SO2

·  IR- printer interface to optional high speed printer

·  USB-interface to PC (optional Bluetooth)

·  Battery- and mains operation

·  Ambient air (combustion air) temperature probe

·  Backlit, 4-lines, well legible LCD-display

Technical Data

Measuring ranges
CO / 0 ... 10.000ppm
O2 / 0 ... 21,0%
Draft / -5 ... +35hPa
Fluegas temperature / 0 ... 1100°C (with adequate gas sampling probe)
Calculated values
Losses / 0 ... 99,9%
Dimensions and other data
Display / 4-lines, backlit graphical display
Combustion air temperature / 0 ... 100°C
Battery capacity / 6 ... 8hours
Weight / appr. 940g

DF 252

Continuous measurement of flue gas flow velocity m/sec using dynamic pressure measurement principle.

Basic Equipments

·  Unit in weatherproof glass fiber housing.

·  Stainless steel probe tube 300 to 1000 mm with differential pressure transmitter and control unit in head of probe.

·  Flow rate calculation m3/sec after entering the stack surface.

·  With flue gas temperature and absolute pressure measurements.

·  With optional heater for low ambient temperature and optional blow-back for dusty flue gas.

Technical Data

Measuring ranges
Measuring range / Velocity: 3 ... 30 m/s.
Flow rate i.o.: 0 ... 1.000 Tm3/h.
Flow rate i.n.: 0 ... 1.000 Tm3/h.
Diff. pressure: 0 ... 5 mbar.
Temperature: 0 ... 300 °C (higher on request).
Absolut pressure (optional): 800 ... 1.200 mbar.

· 

Dimensions and other data
Flange / DN80PN6
Velocity / from appr. 3...30m/s
Housing / Compact unit with integrated control unit (no separate operating unit needed), antifreeze heating (optional)
Protection class / IP 65 (fiberglas weather cover)
Weight / appr. 25kg
Dimensions / 440 x 640 x 1.040 mm (B x H x T), incl. probe 500 mm

DM 401

Dust Monitoring System (non compliant instrument)

Low cost double pass transmissiometry for process dust monitoring

Basic Equipments

·  Transceiver and retroreflector, double path transmissiometry with microprocessor technology.

·  Continuous air purging required to protect optics from stack dust.

·  Small, light weight low power supply and operating costs

·  Opacity or mg/m³ (after on site calibration)

·  Long-life green LED source

·  No moving parts – minimal maintenance

·  Simple installation, commissioning and operation

·  High measuring accuracy

·  PC based setup, control and data logging

Technical Data

Measuring ranges
Opacity / 10 ... 100 % opacity
10 ... 1.000 mg/m3 dust
(after on site calibration according VDI 2066)
Dimensions and other data
Data transmission / galvanic isolated 4-20mA analog output
RS485 with Modbus RTU protocol
PC-Interface / USB or RS485
Medien / only for non condensing flue gas
Accuracy / +/- 2%
Housing / Aluminium die cast
Power supply / 22...24 Vdc / 20W
Protection class / IP 65
Weight / appr. 4,0kg

DM 9200

Precision - Digital - Manometer.

Micro processor controlled piezoresistive pressure sensor.

Zero point adjustment via software.

Large, well legible LCD display.

Programmable average value calculation.

Basic Equipments

·  Microprozessor - controlled electronic pressure sensor.

·  indication of values optinally in mbar, hPa, bar, psi, mmHg, inchHg, cmH2Oor inchH2O.

·  Infrared interface for printer.

·  Data memory for 20 measurements.

·  Min.-/Max. value storage.

·  ABS - housing w/ rear magnet.

Technical Data

Measuring ranges
Measuring range / ± 75 hPa or ± 130 hPa or ± 350 hPa or ± 1.000 hPa
Dimensions and other data
Battery capacity / appr. 1.000 h
Weight / appr. 250g

HD 100 S

Thermo-hygrometer

for continuous measurement of relative humidity, dew point and temperature.

Basic Equipments

·  - illuminated display 2 lines, LCD technology.

·  - Selection of units %RH, °C, °F. Integrated PT - 100 temperature measurement.

·  - Minimum and maximum values.

·  - HOLD function.

·  - Adjustable automatic shut-off.

·  - Power supply via 9V battery.

Technical Data

Measuring ranges
Measuring range / 5 ... 95% RF
Temperature / -20 ... +70°C
Calculated values
Dew point / -40 ... +70
Dimensions and other data
Display / illuminated LCD display
Weight / 190g

LV 100 S

Vane-thermo-anemometer

for continuous measurement of air velocity, airflow and ambient temperatures.

Basic Equipments

·  - 2 – lines, illuminated well legible display

·  - automatic averaging

·  - inteated PT 100 – - temperature measurement

·  - Hold – function

·  - Min.-/ax. value storage

·  - selectable units

·  - velocity: m/s, fpm, km/h

·  - flow: m³/h, cfm, l/s, m³/h

·  - temperature: °C, °F

·  - robust housing

·  - Auto – Off funktion

·  - power supply via 9V batterie

Technical Data

Measuring ranges
Temperature / -20 ... 80°C
Flow rate / 0 ... 99.999m³/h
Flow rate / 0 ... 99.999m³/h
Dimensions and other data
Display / illuminated LCD display
Velocity / 0,25 ... 25m/s
Weight / 190g

MGA 5

Infrared-Multigas-Analyzer

Professional and mobile monitoring of process gases

Basic Equipments

·  Double stage gas cooler with automatic condensate draining pump

·  Heated gas sampling line (3 or 5 m) with 300 ... 2.000 mm sampling tube

·  Automatic internal test and control of soft- and hardwarefunctions

·  Large, high-contrast and backlit graphical display with zoom function

·  Large fuel type list including self choose fuels with user definable fuel types

·  RS 232 interface and internal data memory for approx. 8.500 measurements

·  RS 485 interface for external MRU smart sensor (transmitter) connection

·  Automatic interval measurement

·  Data-visualization and evaluation software for PC (32bit Data Logger)

·  Solenoid valve for automatic zeroing and for calibration

·  Universal analog input (4 ... 20 mA or 0 ... 10 V) or additional NiCrNi thermocouple input

·  8 channel analog output 4 ... 20 mA with user configurable output

·  Internal battery, for protection against short grid power supply failure (less then 1 minute)

Technical Data

Measuring ranges
CO / 0 ... 100
CO2 / 0 ... 100
O2 / 0 ... 25
NO / 0 ... 5.000
NO2 / 0 ... 1.000
SO2 / (infrared) 0 ... 1.000ppm / 5.000ppm (min / max range)
HC / 0 ... 100
H2 / (TCD) 0 ... 10% / 100% (min / max range)
Dimensions and other data
Display / graphical display, 9-lines
Weight / appr. 19 kg

MGA 5Plus

Mobile monitoring of flue gas emissions using

high accuracy, multi-gas infrared technique

Basic Equipments

·  Double stage gas cooler with automatic condensate draining pump

·  Heated gas sampling line (3 m or 5 m length) with 300 ... 2.000 mm sampling tube

·  Automatic internal test and control of soft- and hardware functions

·  Large, high-contrast and backlit graphical display w/ zoom-function

·  Large fuel type list incl. self choose fuels with user definable parameters

·  RS 232 interface and internal data memory for appr. 8.500 measurements

·  RS 485 interface for external MRU Smart-Sensor-Connection (Transmitter)

·  Automatic interval measurement

·  Data-visualization and evaluation softwar (32 Bit Data Logger)

·  Solenoid valve for automatic zeroing and for calibration

·  Universal analog signal input (4 ... 20 mA or 0 ... 10 V )or additional NiCrNi thermocouple input

·  8 channel analog output 4 ... 20 mA with user configurable output

·  Automatic calibration by means of integrated calibration gas cells

Technical Data

Measuring ranges
CO / (infrared) 0 ... 200 / 1.000ppm
CO2 / (infrared) 0 ... 5 / 20%
O2 / (electrochemical or paramagnetic) 0 ... 25%
NO / (infrared) 0 ... 200 / 1.000ppm
NO2 / catalytical convertion to NO (90% efficiency)
SO2 / (infrared) 0 ...200 / 1.000ppm
HC / (infrared as CH4) 0 ... 200 / 1.000ppm
Fluegas temperature / 0 ... 650°C using stainless steel probe tube
0 ... 1100°C using Incoenl steel probe tube
0 ... 1700°C using ceramic tube
Dimensions and other data
Display / graphical backlit display, 10-lines
Velocity / (using Pitot tube) 1 ... 100m/sec
Power supply / universal 100...240Vac
Weight / appr. 19 kg each case

Nova 2000

TÜV ByRgG 252 / EN 50379 -1+2

Systematically expandable.

Rugged aluminium framed case with space for device and accessories.

For up to max 4 electrochemical sensors.

Large 8-row, backlit LCD display.

Generously equipped for a wide variety of applications.

Suitable also for measurement of solid fuels (wood, pellets) combustion.

Basic Equipments

·  Unit with 300 mm probe and 2,7 m sampling line.

·  O2- and CO(H2 comp) electrochemical sensor.

·  Enclosure made of robust aluminium and fiberglas reinforced plastics.

·  Data memory and RS 232 interface.

·  Integrated 58 mm Highspeed - Printer.

·  Mains- and battery operation.

·  Condensate trap and dust/dirt filter.