FMC PACS Installation and Setup

To those who wish to use the Digital Imaging Server

You must have administrative rights to install this software. If you log in to your computer,you probably don’t have administrative rights. If you are on a network at work you probably don’t have administrative rights. Also if you have to <CTRL ALT DEL and then login you probably don’t have administrative rights and you need to talk to your IT department. If you can install programs then you have administrative rights. Also if you are at a home computer you likely have administrative rights.

Once the software is installed the rest of the users do not need administrative rights. Those rights are only needed for the software install. Please read all directions before installing.

To use the Digital Imaging Server

  1. Login to your computer if needed
  2. Open an Internet Explorer must be Internet Explorer v5.0 or greater
  3. Type the following address in the address bar like in the screenshot below
  4. pacs.familymedcenters.net

  1. Type in your login ID and Password (Must contact the Director of IT for your login ID and password.)
  1. This program won’t run if your computer does not have active x. The error message is shown in the screenshot below.

  1. You need to look at the information bar as shown in the popup in the screenshot above.
  2. When you click on it, a pop down window will appear near your mouse and you must click on Install Active X

  1. If the window above appears then complete the following instructions otherwise skip to step 6.

  1. Open the menu Tools
  2. Internet Options

  1. Click on the Security tab at the top of the internet options window.
  2. Then click on Custom level… it is located above the ok button.
  1. Scroll to the Download unsigned ActiveX controls and click in the dot next to Prompt so that the green dot is in it.
  2. Click OK at the bottom of the box.
  3. Select yes on the warning popup.
  4. Then click ok in the internet options box.
  1. Click install if it does not automatically do so.
  1. Allow it to run through the install process and then click finish (shown below)
  1. Close and reopen Internet Explorer.

9. Open Internet Explorer, Login to your computer if needed

  1. Open Internet Explorer must be Internet Explorer v5.0 or greater
  2. Click on Tools, Internet Options
  1. Click on the Security Tab at the top of the box.
  1. Click on the green dot labeled Trusted Sites, then click on the button labeled Sites.
  1. Make sure at the bottom of the box, the check box is UNCHECKED where it asks, Require server verification.
  2. Enter the address in the line under the label Add this web site to the zone, then click on the ADD button.
  3. Click OK to all screens until you are back at the main screen in Internet explorer.
  4. The computer is now ready to use FMC’s digital imaging server.

Page 1 of 10 Version 1.A