Web Interface for Catalyst Switch
The catalyst switch has a web interface you can be enable if you prefer to manage the switch through a browser. In this lab you will explore the web interface and compare it with the console interface.
Setup:
1. Console into the switch and be sure that the HTTP option has been enabled.
2. Assign an IP address of 192.5.5.2 255.255.255.0 to the switch.
3. Remove all VLANS from the switch. The default VLAN is VLAN 1 which cannot be removed.
4. Connect your workstation to one of the ports on the switch and adjust your IP address accordingly. Make the switch the default gateway and the DNS server address if requested.
5. Ping the switch to confirm connectivity.
6. Open Internet Explorer and go to Tools> Internet Options > Connections > LAN Settings > and unselect the Use a Proxy Server box.
7. In the address window of IE type in the IP address of the switch.
8. When prompted for a password type in class. Use guest as the username.
The Web Interface:
1. Describe the home page of the switch. What is displayed and what information is given?
2. What key is given for port status?
3. In your web browser click on the MODE button on the switch. UTL stands for Utilization. How many ports light up?______
4. Click on MODE again. What information is displayed this time?______
Copy the key here:
5. Go to the actual switch and physically click on the MODE button. Are the results the same?_____
6. Double click on any active port. What information comes up? Copy some of the information here.
7. Compare the 100BaseT ports with the 10BaseT ports. What are some of the features found on the 100BaseT ports that is NOT found on the 10BaseT ports?
8. What are the options dealing with unknown MACs?
9. Click on the View button for the port that you are connected to. What information comes up?
Home Page Options
1. Go back to the home page view and look at the options found on the directory bar at the top of the page. List all of the options found on this directory bar.
2. Click on the Address button. What is shown here?
3. Is there a MAC associated with the port you are connected to? What is it?______
4. Go to your PC and see if it has the same MAC address. What command will you use?______
5. What is your PCs MAC?______Are the two MACs the same?_____
6. Once you disconnect from the switch how long will it remember your MAC?______
7. Return to the directory bar, what does SNMP stand for?
8. What does CDP stand for?
9. Where would you go to change the switching mode?______
10. What are the options for switching modes?______
Directory Bar Descriptions
1. Click on each option on the directory bar and give a brief description of the information that each displays.
Button on Bar Description
What one switch function was not available in any of these windows?______