Accessories Supplied Should Include

Thank you for purchasing your DisplayLite Zero Bezel ZBDXX-4K touch screen monitor.

Accessories supplied should include:

1 x Remote control and 2 x AA batteries.1 x NEC Manual and CD ROM.

1 x USB cable.1 x Euro IEC mains cable.

1 x UK IEC mains cable.1 x Displayport to mini Displayport Cable.

GETTING STARTED

Please follow our step by step guide to ensure you get the most from your touch screen monitor.

Step 1Ensure the correct resolution & refresh rate is set for the display. Refer to the monitor manual for details.

Step 2Connecting the monitor
Connect the monitor to your video source as described in the User’s Manual supplied with the monitor.

Touch Screen USB Cable Connection
The USB cable should be connected from the computer to the USB input on the side of the display.
Please Note: Do not connect the touch screen to your PC until you have installed the touch screen driver.

Touch Screen Driver Installation
The drivers can be found via the link on the official 3M website (if required). See below.

There are different drivers for different operating systems. Select the operating system you require and double click on the file and an installation wizard will load on your screen. Go through the wizard and install the software, then restart your computer.

User Manual
The User Manual can be found on the User Manual CD provided.

Touch Screen Calibration

Once the PC has restarted, you will need to plug the touch screen USB cable provided into both the PC and the monitor. Once you have loaded the touch screen driver program, calibrate by following the prompts on screen.

Step 3If you experience a problem re-check all connections and re-start the software driver installation process.

Step 4If you need further assistance, advice or technical support please contact our Touch Screen Helpdesk on:

Tel No: (01480) 455114 and ask for Touch Screen Support

Email:

Website:

Step 5If the fault cannot be rectified please have the following details ready:

Model Number

Serial Number

Date of purchase

3 YEAR WARRANTY

This product is covered by a 3 year warranty with a first year onsite replacement.

To qualify for onsite replacement, it is essential to keep ALL carton and packaging

for this touch screen monitor in order for a valid warranty claim to be processed.

Failure to box the touch screen monitor in its original packaging may invalidate warranty.

Please call the help desk number (01480) 455114 for assistance.

Please ensure you have the information required in step 5 to hand.