The Tolerances of Standard Grade(0 Grade) Bearings Are Shown As Following Table

MATERIALS

The ring and balla of WH bearings are made of refined hogh carbon-chrome bearing steel. The retainers are punch-pressed from super quality cold-rolling steel sheet or made of reinfor-ced engineering plastics. The shield is made of special material(SPCC.JICG3141). The seals are hot-pressed from oil-resistant bune-N rubber with phosphatizing steel skeleton.

ACCURACY

The accuracy of bearings made in accordance with GB/T307-94 National standard is classified in 2,4,5,6 and 0 five grades. The table as below makes a comparison between this accuracy grade with ISO standard, etc.

Standard / Grade of accuracy
GB/T307-94 / 2 / 4 / 5 / 6 / 0
ISO / 2 / 4 / 5 / 6 / 0
ASA / ABEC9 / ABEC7 / ABEC5 / ABEC3 / ABEC1
SKF / P2 / P4 / P5 / P6 / 0

The tolerances of standard grade(0 grade) bearings are shown as following table.

INNER RING

d (mm) / △dmp / Vdp / Vdmp / Kia / △Bs / VBs
Diameter Series
over / incl / max / min / 9 / 0,1 / 2,3,4 / max / max / max / min / max
10 / 18 / 0 / -8 / 10 / 8 / 6 / 6 / 10 / 0 / -120 / 20
18 / 30 / 0 / -10 / 13 / 10 / 8 / 8 / 13 / 0 / -120 / 20
30 / 50 / 0 / -12 / 15 / 12 / 9 / 9 / 15 / 0 / -120 / 20
50 / 80 / 0 / -15 / 19 / 19 / 11 / 11 / 20 / 0 / -150 / 25
80 / 120 / 0 / -20 / 25 / 25 / 15 / 15 / 25 / 0 / -200 / 25

OUTER RING

D (mm) / △Dmp / VDp / VDmp / Kea / △Cs / VCs
open / closed
9 / 0,1 / 2,3,4, / 2,3,4,
over / incl / max / min / max / max / max / max / min / max
18 / 30 / 0 / -9 / 12 / 9 / 7 / 12 / 7 / 15 / As same as△Bs and VBs of that bearing
30 / 50 / 0 / -11 / 14 / 11 / 8 / 16 / 8 / 20
50 / 80 / 0 / -13 / 16 / 13 / 10 / 20 / 10 / 25
80 / 120 / 0 / -15 / 19 / 19 / 11 / 26 / 11 / 35
120 / 150 / 0 / -18 / 23 / 23 / 14 / 30 / 14 / 40

BEARING CLEARANCE

The radial clearance of bearings are divided into five groups according to GB4604 National Standars as following table.

bearing bore(mm) / group 2-C2 / basic group C0 / group 3-C3 / group 4-C4 / group 5-C5
over / incl / min / max / min / max / min / max / min / max / min / max
10 / 18 / 0 / 8 / 3 / 18 / 11 / 25 / 18 / 33 / 25 / 45
18 / 24 / 0 / 10 / 5 / 20 / 13 / 28 / 20 / 36 / 28 / 48
24 / 30 / 1 / 11 / 5 / 20 / 13 / 28 / 23 / 41 / 30 / 53
30 / 40 / 1 / 11 / 6 / 20 / 15 / 33 / 28 / 46 / 40 / 64
40 / 50 / 1 / 11 / 6 / 23 / 18 / 36 / 30 / 51 / 45 / 73
50 / 65 / 1 / 15 / 8 / 28 / 23 / 43 / 38 / 61 / 55 / 90
65 / 80 / 1 / 15 / 10 / 30 / 25 / 51 / 46 / 71 / 65 / 405
80 / 100 / 1 / 18 / 12 / 36 / 30 / 58 / 53 / 84 / 75 / 120
100 / 120 / 2 / 20 / 15 / 41 / 36 / 66 / 61 / 97 / 90 / 140

Special radial clearance or axial clerance requirement could be made as specified in orders.

SHIELDS, SEALS AND LUBRICATION

The bearings include open bearings, single or double shielded bearings(Z,ZZ)and sealed bearings(RS,2RS), When the products are delivered from factory, they are supplied with correct quantity of oil or grease, needn’t be washed and could be used directly. The bearings are suitably used at light and medium loads, low and moderate speed and at temperature of -20℃～110℃. When operation conditions are special, customers should be stipulate quantity and brand name of filled grease at the time of order, The performance and uses of greases are shown as following table.

LUBRICANT TYPES

CSR Code / Brand Name / Basic Type Grease / Operating Temp / Uses
L06 / Exxon Beacon 325 / Synthetic grease / -55~120 / General perpose grease
L01 / Exxon Andok B(Mil-G-18709A) / Channeling petroleum grease / -30~95 / Excellent high speed, low torque, light mass
L02 / Exxon Andok C / Channeling petroleum grease / -30~120 / Smooth running, long life
L80 / G . E . Versilube G300 / Silicine grease / -75~205 / Lingt loads and fine moderate speed
L60 / Mobil 28(Mil-G-81322) / Synthetic hydrocarbon / -55~180 / Wide temperture range, good low tenperature torque
L19 / Chevron SRI-2 / Mineral grease / -30~180 / High temperture range with good water resistance
L15 / Shell Alvania 2 / Mineral grease / -35~120 / Long life and wide application
L76 / Dupont Krytox240AC(mil-G-27617) / Fluorinated grease / -35~290 / High temperature stability with good lubricity properties
L31 / Shell Dolium R / Petroleum grease / -40~150 / Good corrosion resistance and water resistance
L21 / KYODO SRL / Synthetic grease / -40~150 / Low noise, low torque and apercial case
L91 / NIG-ACEW / Synthetic grease / -18~150 / Low noise, low torque and apercial case
L63 / HP / Lithium complex / -30~110 / Vibration, moderate speeds and good corrosion resistance
L08 / Motor No.2 / Mineral grease / -30~110 / Wide application, general purpose

BEARING VIBRATION

The vibration acceleration Level of bearings are divided into Z,Z1,Z2 and Z3. According to JB/T7047-93 Standard. The vibration velocity level on the basis of JB/T5009-94 Standard are divided into VO,V1,V2andV3, also can be supplied according to users needs.

PRODUCT SPECIFICATION SHEET

Bearing No. / Boundary Dimensions（mm） / Load Rating(KN) / Limit Speed(r/min) / Weight
d / D / B / Cr Dynamic / Cor Static / Grease / Oil / (kg)
6000 / 10 / 26 / 8 / 4.58 / 1.98 / 20000 / 28000 / 0.019
6001 / 12 / 28 / 8 / 5.10 / 2.38 / 19000 / 26000 / 0.022
6002 / 15 / 32 / 9 / 5.58 / 2.85 / 18000 / 24000 / 0.031
6003 / 17 / 35 / 10 / 6.00 / 3.25 / 17000 / 22000 / 0.040
6004 / 20 / 42 / 12 / 9.38 / 5.02 / 15000 / 19000 / 0.068
6005 / 25 / 47 / 12 / 10.00 / 5.85 / 13000 / 17000 / 0.078
6006 / 30 / 55 / 13 / 13.20 / 8.30 / 10000 / 14000 / 0.110
6007 / 35 / 62 / 14 / 16.20 / 10.50 / 9000 / 12000 / 0.148
6008 / 40 / 68 / 15 / 17.00 / 11.80 / 8500 / 11000 / 0.185
6009 / 45 / 75 / 16 / 21.00 / 14.80 / 8000 / 10000 / 0.230
6010 / 50 / 80 / 16 / 22.00 / 16.20 / 7000 / 9000 / 0.250
6011 / 55 / 90 / 18 / 30.20 / 21.80 / 6300 / 8000 / 0.362
6012 / 60 / 95 / 18 / 31.50 / 24.20 / 6000 / 7500 / 0.385
6013 / 65 / 100 / 18 / 32.00 / 24.80 / 5600 / 7000 / 0.410
6014 / 70 / 110 / 20 / 38.50 / 30.50 / 5300 / 6700 / 0.575
6015 / 75 / 115 / 20 / 40.20 / 33.20 / 5000 / 6300 / 0.603

Bearing No. / Boundary Dimensions（mm） / Load Rating(KN) / Limit Speed(r/min) / Weight
d / D / B / Cr Dynamic / Cor Static / Grease / Oil / (kg)
6200 / 10 / 30 / 9 / 5.10 / 2.38 / 19000 / 26000 / 0.032
6201 / 12 / 32 / 10 / 6.82 / 3.05 / 18000 / 24000 / 0.035
6202 / 15 / 35 / 11 / 7.65 / 3.72 / 17000 / 22000 / 0.046
6203 / 17 / 40 / 12 / 9.58 / 4.78 / 16000 / 20000 / 0.064
6204 / 20 / 47 / 14 / 12.80 / 6.65 / 14000 / 18000 / 0.103
6205 / 25 / 52 / 15 / 14.00 / 7.88 / 12000 / 16000 / 0.127
6206 / 30 / 62 / 16 / 19.50 / 11.50 / 9500 / 13000 / 0.200
6207 / 35 / 72 / 17 / 25.20 / 15.20 / 8500 / 11000 / 0.288
6208 / 40 / 80 / 18 / 29.50 / 1800 / 8000 / 10000 / 0.368
6209 / 45 / 85 / 19 / 31.50 / 20.20 / 7000 / 9000 / 0.416
6210 / 50 / 90 / 20 / 35.00 / 23.20 / 6700 / 8500 / 0.463
6211 / 55 / 100 / 21 / 43.20 / 29.20 / 6000 / 7500 / 0.603
6212 / 60 / 110 / 22 / 47.80 / 32.80 / 5600 / 7000 / 0.789

Bearing No. / Boundary Dimensions（mm） / Load Rating(KN) / Limit Speed(r/min) / Weight
d / D / B / Cr Dynamic / Cor Static / Grease / Oil / (kg)
6300 / 10 / 35 / 11 / 7.65 / 3.48 / 18000 / 24000 / 0.053
6301 / 12 / 37 / 12 / 9.72 / 5.08 / 17000 / 22000 / 0.061
6302 / 15 / 42 / 13 / 11.50 / 5.42 / 16000 / 20000 / 0.080
6303 / 17 / 47 / 14 / 13.50 / 6.58 / 15000 / 19000 / 0.109
6304 / 20 / 52 / 15 / 15.80 / 7.88 / 13000 / 17000 / 0.142
6305 / 25 / 62 / 17 / 22.20 / 11.50 / 10000 / 14000 / 0.219
6306 / 30 / 72 / 19 / 27.00 / 15.20 / 9000 / 12000 / 0.349
6307 / 35 / 80 / 21 / 33.20 / 19.20 / 8000 / 10000 / 0.455
6308 / 40 / 90 / 23 / 40.80 / 24.00 / 7000 / 9000 / 0.639
6309 / 45 / 100 / 25 / 52.80 / 31.80 / 6300 / 8000 / 0.837
6310 / 50 / 110 / 27 / 61.80 / 38.00 / 6000 / 7500 / 1.08

Bearing No. / Boundary Dimensions（mm） / Load Rating(KN) / Limit Speed(r/min) / Weight
d / D / B / Cr Dynamic / Cor Static / Grease / Oil / (kg)
16002 / 15 / 32 / 8 / 5.60 / 2.55 / 18000 / 24000 / 0.025
16003 / 17 / 35 / 8 / 6.82 / 3.38 / 17000 / 22000 / 0.027
16004 / 20 / 42 / 8 / 7.90 / 4.45 / 15000 / 19000 / 0.050
16005 / 25 / 47 / 8 / 8.42 / 5.15 / 13000 / 17000 / 0.060
16006 / 30 / 55 / 9 / 11.20 / 6.25 / 10000 / 14000 / 0.085
16007 / 35 / 62 / 9 / 11.50 / 8.80 / 9000 / 12000 / 0.100
16008 / 40 / 68 / 9 / 12.50 / 10.20 / 8500 / 11000 / 0.130
16009 / 45 / 75 / 10 / 12.80 / 10.20 / 8000 / 10000 / 0.170
16010 / 50 / 80 / 10 / 16.20 / 13.20 / 7000 / 9000 / 0.18
16011 / 55 / 90 / 11 / 16.20 / 17.20 / 6300 / 8000 / 0.260
16012 / 60 / 95 / 11 / 16.50 / 15.00 / 6000 / 7500 / 0.280
16013 / 65 / 100 / 11 / 17.50 / 16.00 / 5600 / 7000 / 0.300
16014 / 70 / 110 / 13 / 20.20 / 18.80 / 5300 / 6700 / 0.430
16015 / 75 / 115 / 13 / 25.00 / 23.80 / 5000 / 6300 / 0.460
16016 / 80 / 125 / 14 / 25.20 / 25.20 / 4800 / 6000 / 0.600
16017 / 85 / 130 / 14 / 25.80 / 26.20 / 4500 / 56000 / 0.630
16018 / 90 / 140 / 16 / 33.50 / 33.50 / 4300 / 5300 / 0.850
16019 / 95 / 145 / 16 / 37.00 / 36.80 / 4000 / 5000 / 0.890
16020 / 100 / 150 / 16 / 38.20 / 38.50 / 3800 / 4800 / 0.910

Bearing No. / Boundary Dimensions（mm） / Load Rating(KN) / Limit Speed(r/min) / Weight
d / D / B / Cr Dynamic / Cor Static / Grease / Oil / (kg)
61803 / 17 / 26 / 5 / 2.20 / 1.50 / 19000 / 26000 / 0.007
61804 / 20 / 32 / 7 / 3.47 / 2.24 / 17000 / 22000 / 0.020
61805 / 25 / 37 / 7 / 3.66 / 2.65 / 15000 / 19000 / 0.022
61806 / 30 / 42 / 7 / 4.00 / 3.15 / 12000 / 16000 / 0.026
61807 / 35 / 47 / 7 / 4.01 / 3.27 / 10000 / 14000 / 0.030
61808 / 40 / 52 / 7 / 4.53 / 4.05 / 9500 / 13000 / 0.034
61809 / 45 / 58 / 7 / 4.51 / 4.69 / 8500 / 11000 / 0.040
61810 / 50 / 65 / 7 / 5.02 / 4.94 / 8000 / 10000 / 0.057
61811 / 55 / 72 / 9 / 9.06 / 8.45 / 7500 / 9500 / 0.083
61812 / 60 / 78 / 10 / 9.12 / 8.75 / 6700 / 8500 / 0.110
61813 / 65 / 85 / 10 / 9043 / 9.42 / 6300 / 8000 / 0.130
61814 / 70 / 90 / 10 / 10.15 / 9.71 / 6000 / 7500 / 0.114
61815 / 75 / 95 / 10 / 10.03 / 10.76 / 5600 / 7000 / 0.150
61816 / 80 / 100 / 10 / 10.05 / 11.09 / 5300 / 6700 / 0.160
61817 / 85 / 110 / 13 / 19.20 / 19.80 / 4800 / 6000 / 0.245
61818 / 90 / 115 / 13 / 19.50 / 20.50 / 4500 / 5600 / 0.258
61819 / 95 / 120 / 13 / 19.80 / 21.30 / 4300 / 5300 / 0.270
61820 / 100 / 125 / 13 / 20.10 / 22.00 / 4000 / 5000 / 0.238
Bearing No. / Boundary Dimensions（mm） / Load Rating(KN) / Limit Speed(r/min) / Weight
d / D / B / Cr Dynamic / Cor Static / Grease / Oil / (kg)
61903 / 17 / 30 / 7 / 4.59 / 2.55 / 18000 / 24000 / 0.017
61904 / 20 / 37 / 9 / 6.37 / 3.67 / 17000 / 22000 / 0.035
61905 / 25 / 42 / 9 / 7.02 / 4.53 / 14000 / 18000 / 0.041
61906 / 30 / 47 / 9 / 7.24 / 5.00 / 12000 / 16000 / 0.050
61907 / 35 / 55 / 10 / 9.56 / 6.79 / 9500 / 13000 / 0.086
61908 / 40 / 62 / 12 / 13.00 / 9.21 / 9000 / 12000 / 0.110
61909 / 45 / 68 / 12 / 14.13 / 10.86 / 8500 / 11000 / 0.140
61910 / 50 / 72 / 12 / 14.49 / 11.73 / 8000 / 10000 / 0.140
61911 / 55 / 80 / 13 / 18.85 / 15.08 / 7000 / 9000 / 0.190
61912 / 60 / 85 / 13 / 19.42 / 16.23 / 6300 / 8000 / 0.230
61913 / 65 / 90 / 13 / 19.86 / 17.57 / 6000 / 7500 / 0.220
61914 / 70 / 100 / 16 / 23.56 / 21.25 / 5600 / 7000 / 0.350
61915 / 75 / 105 / 16 / 24.33 / 22.54 / 5300 / 6700 / 0.420
61916 / 80 / 110 / 16 / 27.57 / 25.30 / 5000 / 6300 / 0.440
61917 / 85 / 120 / 18 / 31.90 / 29.70 / 4800 / 6000 / 0.507
61918 / 90 / 125 / 18 / 32.80 / 31.50 / 4500 / 5600 / 0.533
61919 / 95 / 130 / 18 / 33.70 / 33.30 / 4300 / 5300 / 0.558
61920 / 100 / 140 / 20 / 42.70 / 41.90 / 4000 / 5000 / 0.774
Bearing No. / Boundary Dimensions（mm） / Load Rating(KN) / Limit Speed(r/min) / Weight
d / D / B / Cr Dynamic / Cor Static / Grease / Oil / (kg)
R8 / 12.7 / 28.575 / 6.35 / 5.10 / 2.38 / 19000 / 26000 / 0.0217
77R8 / 12.7 / 28.575 / 7.938 / 5.10 / 2.38 / 19000 / 26000 / 0.0222
99R8 / 12.7 / 28.575 / 7.938 / 5.10 / 2.38 / 19000 / 26000 / 0.0222
R10 / 15.875 / 34.925 / 7.14 / 6.00 / 3.25 / 17000 / 22000 / 0.030
77R10 / 15.875 / 34.925 / 8.73 / 6.00 / 3.25 / 17000 / 22000 / 0.0365
99R10 / 15.875 / 34.925 / 8.73 / 6.00 / 3.25 / 17000 / 22000 / 0.0365
R12 / 19.05 / 41.275 / 7.938 / 9.38 / 5.02 / 15000 / 19000 / 0.0447
77R12 / 19.05 / 41.275 / 11.112 / 9.38 / 5.02 / 15000 / 19000 / 0.064
99R12 / 19.05 / 41.275 / 11.112 / 9.38 / 5.02 / 15000 / 19000 / 0.064
R14 / 22.225 / 47.625 / 9.525 / 10.00 / 5.85 / 13000 / 17000 / 0.0748
77R14 / 22.225 / 47.625 / 12.7 / 10.00 / 5.85 / 13000 / 17000 / 0.100
99R14 / 22.225 / 47.625 / 12.7 / 10.00 / 5.85 / 13000 / 17000 / 0.100
R16 / 25.4 / 50.8 / 9.525 / 10.00 / 5.85 / 13000 / 17000 / 0.0808
77R16 / 25.4 / 50.8 / 12.7 / 10.00 / 5.85 / 13000 / 17000 / 0.110
99R16 / 25.4 / 50.8 / 12.7 / 10.00 / 5.85 / 13000 / 17000 / 0.110
R18 / 28.575 / 53.975 / 9.525 / 13.20 / 8.30 / 10000 / 14000 / 0.0847
77R18 / 28.575 / 53.975 / 12.7 / 13.20 / 8.30 / 10000 / 14000 / 0.0867
99R18 / 28.575 / 53.975 / 12.7 / 13.20 / 8.30 / 10000 / 14000 / 0.0867
R20 / 31.75 / 57.15 / 9.525 / 13.20 / 8.30 / 10000 / 14000 / 0.0807
77R20 / 31.75 / 57.15 / 12.7 / 13.20 / 8.30 / 10000 / 14000 / 0.0827
99R20 / 31.75 / 57.15 / 12.7 / 13.20 / 8.30 / 10000 / 14000 / 0.0827
R22 / 34.925 / 63.5 / 11.112 / 16.20 / 10.50 / 9000 / 12000 / 0.1290
77R22 / 34.925 / 63.5 / 14.288 / 16.20 / 10.50 / 9000 / 12000 / 0.1322
99R22 / 34.925 / 63.5 / 14.288 / 16.20 / 10.50 / 9000 / 12000 / 0.1322
R24 / 38.1 / 66.675 / 11.112 / 17.00 / 11.80 / 8500 / 11000 / 0.1337
77R24 / 38.1 / 66.675 / 14.288 / 17.00 / 11.80 / 8500 / 11000 / 0.137
99R24 / 38.1 / 66.675 / 14.288 / 17.00 / 11.80 / 8500 / 11000 / 0.137
Bearing No. / Boundary Dimensions（mm） / Load Rating(KN) / Limit Speed(r/min) / Weight
d / D / B / Cr Dynamic / Cor Static / Grease / Oil / (kg)
1614 / 9.525 / 28.575 / 9.525 / 5.10 / 2.38 / 19000 / 26000 / 0.0286
1615 / 11.112 / 28.575 / 9.525 / 5.10 / 2.38 / 19000 / 26000 / 0.0267
1616 / 12.700 / 28.575 / 9.525 / 5.10 / 2.38 / 19000 / 26000 / 0.0247
1620 / 11.112 / 34.925 / 11.112 / 6.00 / 3.25 / 17000 / 22000 / 0.0554
1621 / 12.700 / 34.925 / 11.112 / 6.00 / 3.25 / 17000 / 22000 / 0.0529
1622 / 14.288 / 34.925 / 11.112 / 6.00 / 3.25 / 17000 / 22000 / 0.0499
1623 / 15.875 / 34.925 / 11.112 / 6.00 / 3.25 / 17000 / 22000 / 0.0467
1628 / 15.875 / 41.275 / 12.700 / 9.38 / 5.02 / 15000 / 19000 / 0.0788
1630 / 19.050 / 41.275 / 12.700 / 9.38 / 5.02 / 15000 / 19000 / 0.0778
1633 / 15.875 / 44.450 / 12.700 / 9.38 / 5.02 / 15000 / 19000 / 0.1000
1635 / 19.050 / 44.450 / 12.700 / 9.38 / 5.02 / 15000 / 19000 / 0.0914
1638 / 19.050 / 50.800 / 14.288 / 10.00 / 5.85 / 13000 / 17000 / 0.1470
1640 / 22.225 / 50.800 / 14.288 / 10.00 / 5.85 / 13000 / 17000 / 0.1360
1641 / 25.400 / 50.800 / 14.288 / 10.00 / 5.85 / 13000 / 17000 / 0.1220
1652 / 28.575 / 63.500 / 15.875 / 19.50 / 11.50 / 9500 / 13000 / 0.2238
1654 / 31.750 / 63.500 / 15.875 / 19.50 / 11.50 / 9500 / 13000 / 0.2056
1657 / 31.750 / 65.088 / 17.462 / 19.37 / 11.42 / 9500 / 13000 / 0.2386
1658 / 33.338 / 65.088 / 17.462 / 19.37 / 11.42 / 9500 / 13000 / 0.2359
Bearing No. / Boundary Dimensions(mm) / Load Rating(KN) / Weight(kg)
8000 / 87000 / 88000 / d / D / B / C / Bi / rmin / Cr Dynamic / Cor Static / 8000 / 87000 / 88000
8500 / 87500 / 88500 / 10 / 30 / 12.7 / 9 / 16.041 / 0.6 / 5.11 / 2.39 / 0.034 / 0.035 / 0.041
8011 / 87011 / 88011 / 11 / 32 / 12.7 / 10 / 15.400 / 0.6 / 6.82 / 3.06 / 0.045 / 0.046 / 0.047
8501 / 87051 / 88501 / 12 / 32 / 12.7 / 10 / 15.400 / 0.6 / 6.82 / 3.06 / 0.043 / 0.044 / 0.045
8013 / 87013 / 88013 / 13 / 32 / 12.7 / 10 / 15.400 / 0.6 / 6.82 / 3.06 / 0.041 / 0.042 / 0.043
8014 / 87014 / 88014 / 14 / 35 / 12.7 / 11 / 14.399 / 0.6 / 7.64 / 3.72 / 0.050 / 0.052 / 0.057
8502 / 87502 / 88502 / 15 / 35 / 12.7 / 11 / 14.399 / 0.6 / 7.64 / 3.72 / 0.048 / 0.049 / 0.054
8016 / 87016 / 88016 / 16 / 35 / 12.7 / 11 / 14.399 / 0.6 / 7.64 / 3.72 / 0.046 / 0.048 / 0.052
8602 / 87602 / 88602 / 15 / 42 / 15 / 13 / 17 / 1.0 / 11.44 / 5.43 / 0.085 / 0.088 / 0.095
8503 / 87503 / 88503 / 17 / 40 / 14.288 / 12 / 16.601 / 0.6 / 9.57 / 4.79 / 0.068 / 0.070 / 0.075
8603 / 87603 / 88603 / 17 / 47 / 16 / 14 / 18 / 1.0 / 13.58 / 6.58 / 0.115 / 0.117 / 0.127
8504 / 87504 / 88504 / 20 / 47 / 15.875 / 14 / 17.750 / 1.0 / 12.84 / 6.65 / 0.105 / 0.108 / 0.118
8604 / 87604 / 88604 / 20 / 52 / 19 / 15 / 23 / 1.0 / 15.94 / 7.88 / 0.157 / 0.160 / 0.181
8505 / 87505 / 88505 / 25 / 52 / 15.875 / 15 / 16.749 / 1.0 / 14.02 / 7.88 / 0.130 / 0.133 / 0.138
8605 / 87605 / 88605 / 25 / 62 / 21 / 17 / 25 / 1.0 / 22.38 / 11.49 / 0.268 / 0.272 / 0.295
8026 / 87026 / 88026 / 26 / 52 / 15.875 / 15 / 16.749 / 1.0 / 14.02 / 7.88 / 0.126 / 0.128 / 0.134
8506 / 87506 / 88506 / 30 / 62 / 20 / 16 / 24 / 1.0 / 19.46 / 11.31 / 0.225 / 0.230 / 0.259
8606 / 87606 / 88606 / 30 / 72 / 23 / 19 / 27 / 1.0 / 27.00 / 15.19 / 0.391 / 0.404 / 0.440
8507 / 87507 / 88507 / 35 / 72 / 21 / 17 / 25 / 1.0 / 25.67 / 15.30 / 0.316 / 0.321 / 0.347
8607 / 87607 / 88607 / 35 / 80 / 25 / 21 / 29 / 1.5 / 33.36 / 19.21 / 0.499 / 0.509 / 0.545
8508 / 87508 / 88508 / 40 / 80 / 24 / 21 / 27 / 1.0 / 29.52 / 18.14 / 0.468 / 0.486 / 0.536
8608 / 87608 / 88608 / 40 / 90 / 27 / 23 / 31 / 1.5 / 40.75 / 24.01 / 0.695 / 0.708 / 0.749
8509 / 87509 / 88509 / 45 / 85 / 24 / 21 / 27 / 1.0 / 31.67 / 20.88 / 0.540 / 0.545 / 0.554
8609 / 87609 / 88609 / 45 / 100 / 30 / 25 / 35 / 1.5 / 52.86 / 31.83 / 0.890 / 0.913 / 0.994
8510 / 87510 / 88510 / 50 / 90 / 26 / 22 / 30 / 1.0 / 35.07 / 23.18 / 0.577 / 0.590 / 0.636
8511 / 87511 / 88511 / 55 / 100 / 27 / 23 / 31 / 1.5 / 43.38 / 29.22 / 0.727 / 0.745 / 0.808