Form for inquiries, offers, and orders

Part-turn actuators SQEx 05.2 – SQEx 14.2/SQREx 05.2 – SQREx 14.2

Inquiry / Offer / Order
Reference number: / Project:
Issued by: / Shipment:
Date: / Forw. agent / Air freight
Delivery date: / Sea freight
Delivery address:
Order code / Euro/unit
3-phase AC / 1-phase AC
Quantity: / SQEx open-close duty/type of duty / S2 - 15 min / S2 - 10min
SQREx modulating duty/type of duty / S4 – 25 % ED / S4 – 20 % ED
S4 – 50 % ED

Size:

05.2 (max. 150 Nm) / 07.2 (max. 300 Nm) / 10.2 (max. 600 Nm)
12.2 (max. 1 200 Nm) / 14.2 (max. 2 400 Nm)

Actuator controls:

ACExC 01.2 (separate form)
AMExC (separate form)
SEMExC local controls only, no actuator controls!

Explosion protection:

ATEX / IEC / Special:
Zone 1 / Ex de IIC / Ex d IIC / T4 / T3
T4 / T3

Fire protection:

K-MASS
Basic price:
Size of valve attachment:
EN ISO 5211 / F04 / F05 – 07 / F07 / F10 / F12 / F14 / F16
N (without spigot) / Y (with spigot)
with base and lever
2 ball joints suitable for swing lever

Operating times in seconds (for 90°):

Please note: Operating times depend on the size of the actuator, refer to technical data SQEx .2

at 50 Hz / 4 / 5.6 / 8 / 11 / 16 / 22 / 24 / 32
36 / 45 / 48 / 63 / 72 / 90 / 100 / 125
at 60Hz / 3 / 4.5 / 6 / 9 / 12 / 17 / 20 / 25
30 / 35 / 40 / 50 / 60 / 75 / 85 / 108

Coupling:

UN (unbored)
Per 10 mm exceeding standard extension / L_ _
Bore according EN ISO 5211 with 1 keyway according to DIN 6885-1, diameter mm / K
Bore according EN ISO 5211 with 2 keyways according to DIN 6885-1, diameter mm / K-Nx/2-xx
Square bore according to EM ISO 5211, width across flats mm / S
Two-flat bore according to EM ISO 5211, width across flats mm / D
Special diameter for square bore or two-flat bore mm

Motor:

Voltage [V/Hz]:
3-phase AC / 400/50 / 220/50 / 230/50 / 240/50 / 380/50
415/50 / 440/60 / 460/60 / 480/60 / 500/50
Special voltage / 3-ph
Wechselstrom / 220 – 240/50 / 220 – 240/60 / 110 – 120/50 / 110 – 120/60
Special voltage / 1-ph
Insulation class:
Insulation class F / F
Insulation class H / H
Motor protection:
Thermoswitch / 1T
PTC thermistor / 1K
Order code / Euro/unit

Torque switching:

with 2 single switches / 6
with 2 tandem switches / 6.2
Gold-plated / G

Limit switching:

with 2 single switches / 8
with 2 tandem switches / 8.2
With 2 triple switches / 8.3
DUO with 4 single switches / 9
DUO with 1 tandem switch for each end position and 2 single switches for intermediate positions / 9.2
DUO with 1 single switch for each end position and 2 tandem switches for intermediate positions / 9.3
DUO with 1 tandem switch for each end position and 2 tandem switches for intermediate positions / 9.4
Gold-plated / G

Signalling:

Blinker transmitter (standard for SQ open-close duty/option for SQR modulating duty) / 24
Manual operation (via switch contact) / 25
Gold-plated / G

Precision potentiometer (0.1/ 0.2/0.5/1.0/5.0 kOhm):

12.1-0.2 kOhm / 12.1- kOhm / 12.1
12.2-/ kOhm, tandem version / 12.2

Precision film potentiometer (1.0/5.0 kOhm):

12.3-5.0 kOhm / 12.3- kOhm / 12.3
12.4-/ kOhm, tandem version / 12.4

Electronic position transmitter:

2-wire system (4 – 20mA) / ____
4-wire system (4 – 20mA) / ____
MWG (magnetic limit and torque transmitter) only possible with AC 01.2! / 30.2

Heater:

110 V – 250 V AC/DC / 24 V – 48 V AC/DC / 380 V – 400 V AC/DC / 22.x
24 V AC with AM/AC / 22.5
Motor heater / 115V AC / 230V AC / 380 – 480 V AC / 23.x

Terminal plan:

TPA
Special wiring / Axx

Enclosure protection:

IP68 / IP68
double sealed

Temperature version:

–30°C to +40 °C/+60 °C / N-40-x
–40 °C to +40 °C/+60 °C (low temperature) / L-40-x
–60 °C to +40 °C/+60 °C (extreme low temperature) / L-60-x
–30 °C to +80 °C (high temperature), for SQEx/SQREx NORM with 3-phase AC motor / L-30-80
Special:

Corrosion protection:

KS; Suitable for use in areas with high salinity, almost permanent
condensation, and high pollution / KS
KX; Suitable for use in areas with extremely high salinity, permanent
condensation, and high pollution / KX
Aluminium-free version / G001

Colour:

AUMA silver-grey (similar to RAL 7037)
Special colour

Handwheel:

Standard / Lockable / Special version
Order code / Euro/unit

Electrical connection in "Ex e" version (increased safety)

Ex plug/socket connector with screw-type terminals, up to max. 3 threaded holes
1 x M20 x 1.5; 1 x M25 x 1.5; 1 x M32 x 1.5 / KP-105
1 x Pg 13.5; 1 x Pg 21; 1 x Pg 29 / KP-003
2 x ¾" NPT; 1 x 1¼" NPT / KP-080
2 x G ¾"; 1 x G 1¼" / KP-179
Special version
Ex plug/socket connector with screw-type terminals, up to max. 5 threaded holes
1 x M20 x 1.5; 2 x M25 x 1.5; 1 x M32 x 1.5 / KH-148
1 x Pg 13.5; 2 x Pg 21; 1 x Pg 29 / KH-026
Special version
Ex plug/socket connector with terminal blocks
1 x M20 x 1.5; 2 x M25 x 1.5; 1 x M32 x 1.5 / KS-105
1 x Pg 13.5; 2 x Pg 21; 1 x Pg 29 / KS-003
2 x ¾" NPT; 1 x 1¼" NPT / KS-080
2 x G ¾"; 1 x G 1¼" / KS-179
Special version

Electrical connection in "Ex d" version (flameproof enclosure)

Ex plug/socket connector with terminal blocks
2 x M25 x 1.5 /1 x M32 x 1.5 / KS-108
4 x 1" NPT / KS-008
Special version

Cable glands:

Ex e IP 68, Ms/Ni, for Cu shielded cables, strain relief
M20 x 1.5 - clamping range Ø 7 mm to 12 mm / M20
M25 x 1.5 - clamping range Ø 13mm to 18mm / M25
M32 x 1.5 - clamping range Ø 18mm to 25mm / M32

Name plate:

Language
DE / EN / other
Material
AL / A2

Swing angle:

Set to ° / Torque CLOSE Nm / Torque OPEN Nm

Mounted to:

Actuator controls / Important: Heed temperature version!

To be supplied separately:

Accessories:

Parking frame for plug, when removed from actuator / 95.1
Protection cover for plug compartment (when plug is removed) / 96.1

Special features:

Identification plate (KKS no. - Power Plant Classification System) / 99
Total price/unit
x Unit(s)
Total price

Note: The respective standard version is printed in bold letters1/5

Y006.495/003/en/1.16