Ronatec Perecid 6 - Technical Data Sheet - Page 2
Ronatec Perecid 6
Liquid, low Foaming, Peroxyacetic Acid basedSanitizer
Description:
Ronatec Perecid 6 is a blend of peroxyacetic acid surfactants. Ronatec Perecid B has a high oxidation potential and is very reactive. It exhibits excellent bactericidal and fungicidal activity against a wide range of microorganisms in cold or warm water.Ronatec Perecid 6 is an equilibrium mixture of peracetic acid, hydrogen peroxide, acetic acid, proprietary ingredients, and water.
Primary Application:
Ronatec Perecid 6 is a multi-purpose product. Used in the food and beverage processing industry for CIP pipeline cleaning, sanitizing, bottle and filler sanitizing, and disinfection. Other uses include slime and biofouling control, sulfite and odor reduction, cleaning UF and RO membranes, and the disinfection in human and veterinary applications including hospitals.
Characteristics:
Appearance Colorless, clear liquid
FoamModerate
OdorPungent vinegar-like odor
pH @ 1%2.5
pH @ 10%1.8
EPA Reg No63838-1
CA EPA Reg No63838-1-AA
Operating and Solution Controls:
Sanitization:
Ronatec Peracid 6 peroxyacetic acid sanitizer is recommended for use on precleaned surfaces such as equipment, pipelines, tanks, vats, filters, evaporators, pasteurizers, and aseptic equipment in dairies, breweries, wineries, beverage and food processing/packing plants, egg processing/packing equipment surfaces, and eating establishments. This product is effective as a sanitizer when solution is prepared in water of up to 400 ppm hardness as CaCO3. This product has demonstrated greater than 99.999% reduction of organisms after 60 seconds exposure period in the AOAC Germicidal and Detergent Sanitizing Action of Disinfectants study. NOTE: For Mechanical Operations prepared use solution may not be reused for sanitizing but may be reused for other purposes such as cleaning. For Manual Operations fresh sanitizing solutions should be prepared daily or more often if the solution becomes diluted or soiled.
Sanitizing Food Contact Surfaces:
This product can be used in Federally inspected Meat and Poultry facilities as a sanitizer. Prior to sanitizing, remove gross food particles, then wash with a detergent solution, followed by a potable water rinse. Sanitize with a concentration of 1.0-2.4 oz. MG Peracid 6 diluted in 6 gallons of water (0.13-0.31% v/v concentration, or 82-197 ppm active peroxyacetic acid). At this dilution, MG Peracid 6 is effective against Staphylococcus aureus, Escherichia coli, Salmonella choleraesius, and Listeria monocytogenes. Use immersion, coarse spray or circulation techniques as appropriate to the equipment. All surfaces should be exposed to sanitizing solution for a period of at least 60 seconds or more if specified by a governing code. Drain any excess solution. Do not rinse.
Final Sanitizing Bottle Rinse:
Ronatec Peracid 6 may be used as a final sanitizer rinse, followed by adequate drying for returnable and non-returnable bottles at a 0.13%-0.31% dilution (1.0 oz.-2.4 oz. MG Peracid 6 diluted in 6 gallons of water), which yields 82-197 ppm active peroxyacetic acid.
Non Food Contact Hard Surface Disinfection:
Ronatec Peracid 6 is effective against Staphylococcus aureus, Salmonella choleraesius, Pseudomonas aeruginosa, Trichophyton mentagrophytes and Escherichia coli O157:H7 at 0.23%-3% v/v (1.5-20 oz./5 gal.) in hard water (400 ppm as CaCO3) and 5% organic soil loading on hard nonporous surfaces. For heavily soiled areas a precleaning step is required, followed by a potable water rinse. Apply solution with a mop, cloth, sponge, brush, etc… or by soaking or immersion so as to wet all surfaces thoroughly. Allow to remain wet for 10 minutes, then remove solution and entrapped soil with a clean wet mop, cloth, wet vacuum pickup, or by draining. Surfaces that may directly or indirectly contact food must be rinsed with potable water before operations resume. A rinse for non-food contact surfaces is optional. Prepare a fresh solution daily or when it becomes soiled or diluted.
First Aid:
If contact with eyes, flush with plenty of water for 15 minutes and seek medical attention. If contact with skin, flush with plenty of water and remove contaminated clothing. If inhaled, get person to fresh air and get medical attention. If ingested, do not induce vomiting and get medical attention.
HMIS Ratings:
H=3, F=0, R=1, P=J (Splash goggles, gloves, synthetic apron, vapor respirator).
D.O.T. Shipping Data:
Hydrogen Peroxide and Peroxyacetic Acid Solution, stabilized, 5.1, (8), UN 3149, PG II. Corrosive.
Available Product Packaging:
5gal or 55gal
Material Safety Data Sheets:
Material Safety Data Sheets (M.S.D.S.) are readily available on this product. It is strongly recommended that all personnel thoroughly read and understand the information contained in both the Technical Data Sheet and the Material Safety Data Sheet before using this product.
Warranty:
The information presented herein, while not guaranteed, is to the best of our knowledge true and accurate. No warranty or guarantee expressed or implied is made regarding the performance of any products, since the manner of use is beyond our control. No suggestion for product use nor anything contained herein, shall be construed as a recommendation for its use in infringement of any existing patent, and we assume no responsibility or liability for operations which do infringe any such patents. The above includes confidential and proprietary information of Ronatec C2C, Inc. and is furnished to you for your use solely on products or processes supplied to you by us.
P.O. Box 1976, Fallbrook, Ca 92028 Phone: 760.451.9081Fax: 760.946.7862