Integrated Framework
CONSTRUCTION, PLUMBING AND SERVICE
INTEGRATED FRAMEWORK
TRAINING PACKAGE
CPC08
CPCPWT3029A
INSTALL WATER PIPE SYSTEMS
LEARNING GUIDE
ACKNOWLEDGEMENTS
National Plumbing Services Training Advisory Group
Plumbing Industry Commission Victoria
© Commonwealth of Australia 2015
Construction and Property Services Industry Skills Council
PO Box 151
Belconnen ACT 2616
Tel: 02 6253 0002
This work is copyright, but permission is given to trainers and teachers to make copies and contextualise the resources for use within their own training organisation or in a workplace where training is being conducted. This permission does not extend to making copies for use outside the immediate training environment for which they are made, or the making of copies for hire or resale to third parties.
This work was first published in 2004 with the assistance of funding provided by the Commonwealth Government through the Australian National Training Authority (ANTA). The2015 publication has been updated to reflect changes to the national units of competency.
The views expressed in this work do not necessarily represent the views of the Commonwealth of Australia or CPSISC. In addition, the Commonwealth of Australia and CPSISC do not give warranty or accept any legal liability in relation to the content of this work.
The website addresses and other contact information provided in this publication were compiled in good faith and were correct at the time of printing.
The updating of these resources was completed by:
National Plumbing and Services Training Advisory Group, with funding and support provided by the Construction and Property Services Industry Skills Council (CPSISC):
This guide was developed in consultation with representatives of the Plumbing Industry by NPSTAG and CPSISC to support the implementation of the CPC08 Construction, Plumbing and Services Training Package.
©Commonwealth of Australia 2015
Install water pipe systems
Contents
Underpinning knowledge assessment......
CPCPWT3029AInstall water pipe systems
Practical assessment......
CPCPWT3029AInstall water pipe systems
Scenarios and activities......
CPC08 – Plumbing and Services Training Package......
CPCPWT3029AInstall water pipe systems
©Commonwealth of Australia 20151
Install water pipe systems
Underpinning knowledge assessment
CPCPWT3029AInstall water pipe systems
Learner Name: ......
To complete the assessment for this section you will need to answer the following questions.
If competence is not achieved a comment may be inserted after each question.
Criteria / Yes / NoDid the learner demonstrate knowledge of plumbing Industry terminology?
Did the learner demonstrate knowledge of site and equipment safety requirements?
Did the learner demonstrate knowledge of mains pipe systems and installation procedures?
Did the learner demonstrate knowledge of confined space entry requirements?
Did the learner demonstrate knowledge of dewatering?
Did the learner demonstrate knowledge of concrete and concrete fabrication?
Criteria / Yes / No
Did the learner demonstrate knowledge of the processes for interpreting engineering drawings?
Did the learner demonstrate knowledge of equipment types, characteristics, technical capabilities and limitations?
Did the learner demonstrate knowledge of operational, maintenance and basic diagnostic procedures including testing procedures?
Did the learner demonstrate knowledge of mains water pressure?
Did the learner demonstrate knowledge of valves and flow control devices?
Did the learner demonstrate knowledge of water reticulation?
Did the learner demonstrate knowledge of processes for the calculation of pipeline grades and percentages?
Did the learner demonstrate knowledge of sedimentation and erosion controls?
Criteria / Yes / No
Did the learner demonstrate knowledge of excavation/trench safety?
Did the learner demonstrate knowledge of site isolation and traffic control responsibilities and authorities?
Did the learner demonstrate knowledge of the Material Safety Data Sheets and materials handling methods?
Did the learner demonstrate knowledge of project quality requirements?
Did the learner demonstrate knowledge of JSA’s/safe work method statement?
The learner’s underpinning knowledge was:
/ Satisfactory / / Not satisfactoryFeedback to learner:
Assessor’s Signature: ......
Date of Completion: ......
Practical assessment
CPCPWT3029AInstall water pipe systems
Name: ......
Competency should be assessed while tasks are undertaken either individually or as part of a team operation under limited supervision. Assessment should involve:
- observation of work processes
- questioning related to underpinning knowledge.
Assessment may be by intermittent checking at various stages of each task application or at the completion of each task in accordance with the performance criteria. Project work may also group pre-requisite and/or
co-requisite competencies together to carry out such projects.
After the completion of the task you must check the following points.
If competence is not achieved a comment may be inserted after each question.
Criteria / Yes / NoDid the learner locate interpret and apply relevant information, standards and specifications?
Did the learner comply with the site safety plan, OH&S regulations and state/territory legislation applicable to workplace operations?
Did the learner comply with organisational policies and procedures including quality requirements?
Criteria / Yes / No
Did the learner install of a minimum of six metres of
100 mm mains pipe system, which included two changes of direction and one tee junction?
Did the learner install a mains pipe system, which, at a minimum included two materials and one isolation valve?
Did the learner demonstrate safe and effective operational use of tools, plant and equipment?
Did the learner communicate and work effectively and safely with others?
Assessor’s Signature: ......
Date of Completion: ......
Scenarios and activities
The assessable scenarios/activities that you, as the assessor, design must meet the requirements of the evidence guide for this unit. You may choose to use activities from the learner resource or develop additional assessable activities. The learner must participate in assessable activities or scenarios that ensure the learner can:
Relevant elements1.Explain and demonstrate planning and preparation procedures for installing water mains pipe systems / 1
2.Explain and demonstrate the set out and excavation of the job / 2
3.Demonstrate the installation of mains pipeline / 3
4.Explain and demonstrate the testing of mains pipe systems / 4
5.Explain and demonstrate clean up procedures / 5
Assessor’s Signature: ......
Date of Completion: ......
CPC08 – Plumbing and Services Training Package
CPCPWT3029AInstall water pipe systems
Competency assessment result
Name: ......
At the time of assessment, the learner was assessed as:
/ Competent / / Not Yet CompetentThe learner requires the following skill development before reassessment:
Feedback to learner on overall performance during assessment:
Signatures
Name of Assessor: ......
Signature: ...... Date: ......
I have been provided with feedback on the evidence I have provided. I have been informed of the assessment result and the reasons for the decision.
Signature of Learner: ...... Date: ......
I have reviewed this Assessment Plan and believe that the assessment has been conducted in accordance with the Assessment Guidelines Plumbing and Services Training Package.
Signature of Qualified Assessor: ......
Date: ......
©Commonwealth of Australia 20151