Monday Morning, September 26, 2011, 0745-0800 Opening Remarks
Alfred Rouleau Room Dr. Suong V. Hoa, Conference Co-Chair, Concordia University
Dr. Louise Dandurand, Vice President Research and Graduate Studies, Concordia University
Monday Morning, September 26, 2011, 0800-0850 Plenary Lecture: "Active Composites in Morphing, Monitoring and Harvesting”
Alfred Rouleau Room Prof. Daniel Inman, University of Michigan
M1 Sessions, Monday Morning, September 26, 2011, 0900-1015
Anjou / Auteuil / Picardie A / Picardie B / Alfred Rouleau / Argenteuil
Failure – 1
Chair: F. Taheri / Natural
Constituents – 1
Chair: P. Hubert / Hyer-1
Advanced Materials
Chair: D. Liu / Fatigue
Chair: S. Mall / Structures - 1
Chair: R. Ganesan / Manufacturing -1
Chair: A. Blouin
0900 / 1166 Modeling the Effects of Kinking and Delamination on the Compression Strength of Fiber Reinforced Laminated Composites
P. Prabhakar, A. Waas / 1048 The Effect of Alkylation on the Thermal and Mechanical Properties of Hemp Fiber Composite with Recycled High Density Polyethylene Matrix , N. Lu,
S. Bhogaiah, I. Ferguson / 1114 Recent Advances in the Research of Carbon Nanotube-Based Fibers
T.-W. Chou, W. Lu, M. Zu, J.-H. Byun / 1001 Fatigue Life Analysis of Composite Joints using a Wearout Model, G. Li,
G. Renaud, N. Bhatt / 1068 Improved Efficiency in the Buckling Analysis of Composite Laminated Rectangular Plates
A. Khaziev, C. Boshers / 1182 Compression Behaviour of AFP Manufactured Carbon/Epoxy Composites Containing Gaps and Overlaps, P. Legay,
R. Boukhili, M. Hojjati,
J. Chen
0925 / 1040 Analysis and Control of Smart Composite Laminates using Piezoelectric Materials
Z. Hasan, A. Muliana / 1084 Interrelation between the Extrusion Process, Formulation, and Properties of Polypropylene/Flax Fibers Composites, M. Mihai,
N. Chapleau, J. Denault
C. Belanger /
1227 Probabilistic Dynamic Buckling of Smart Composite Shells
G. Abumeri and C. Chamis / 1029 Fatigue Performance of Tapered Laminates with Internal Ply Drop-Offs: Experiments and Numerical PredictionsS. Giannis / 1062 Buckling Effects on the Fluid-Structure Interaction of a Viscoelastic, Composite Panel in a Subsonic Flow
C. Merrett, H. Hilton / 1076 A Study on the Influence of Gaps/Overlaps on the Strength of Composite Panels Made by the Automated Fiber Placement Method
S. Prabhakar,
K. Fayazbakhsh, D. Pasini, L. Lessard
0950 / 1221 A Non-local Approach to Simulation of Damage in Laminated Composites
A. Forghani, S.McClennan,
A. Poursartip, R.Vaziri / 1118 Biodegradable Green Composites from Natural Fibers and Bioplastics
V. Nagarajan, A. Mohanty, M. Misra / 1180 Molecular Dynamics Simulation of Carbon Nanotubes under Combined Loading
S. Chowdhury, B. Gama,
J. Gillespie Jr. / 1198 Progressive Fatigue Damage Modeling in CFRP Laminates using Cohesive Elements
A. Conway, X. Xiao / 1042 Pumping Potential of Flexible-Matrix-Composite Shell-of-Revolution Structures
H. Ghoneim / 1192 A Model for Wrinkle Compaction In Thermoset Prepreg Processing
J. Gangloff Jr., S. Sinha,
P. Simacek, S. Advani
1020-1050 Break Jeanne Mance
M2 Sessions, Monday Morning, September 26, 2011, 1055-1210
Anjou / Auteuil / Picardie A / Picardie B / Alfred Rouleau / Argenteuil
Failure – 2
Chair: F. Taheri / Natural
Constituents – 2
Chair: P. Hubert / Hyer -2 Manufacturing
Chair: D. Liu / Nanotechnology -1
Chair: E. Thostenson / Applications
Chair: T. Lacy / Manufacturing -2
Chair: L. Lessard
1055 / 1006 Testing and Analysis of the End-Notched Flexure Specimen for Composites
under Mode-II Fracture
V. Ranatunga, S. Clay / 1154 The Mechanical Properties of Kenaf Fiber Reinforced Thermoplastic Composites
R. Paskaramoorthy,
O. Asumani, R. Reid / 1196 Co-Cured Biomimetic Composite T-Joints
V. Thummalapalli
S. Donaldson / 1098 Comparing FE and Analytical Micromech. Modeling of Randomly Oriented Single Walled Carbon Nanotubes Reinforced Nanocomposites
H. Moussaddy,
M. Lévesque, D. Therriault / 1126 Advanced Carbon Fiber Composite (CFC) Materials for Antenna Applications
A. Mehdipour, I. Rosca,
A.-R. Sebak, C. Trueman,
S. Hoa / 1012 Lamborghini “Forged Composite” Technology
P. Feraboli, F. Gasco,
B. Wade, S. Maier,
R. Kwan, A. Masini,
L. DeOto, M. Reggiani
1120 / 1069 Mixed-Mode Delamination Onset Detection by AE monitoring in CFRP Composites under Quasi-Static and Cyclic Loading
I. Silversides, A. Maslouhi, G. LaPlante / 1119 Poly(trimethylene terephthalate) (PTT)/ Poly(butylene succinate) (PBS) Blend and Their Hybrid Biocomposites
S. Vivekanandhan,
M. Misra, A. Mohanty / 1045 Processing Characteristics and Mechanical Properties of Glass Fabric Reinforcements Coated With Graphite Nanoparticles
R. Umer, E. Waggy, A. Loos / 1046 A Concurrently Coupled Multi-Scale Model for Predicting Properties of Thermoplastic Nanocomposites
S. Roy, A. Nair / 1127 Reinforced Continuous Carbon Fiber (RCCF) Composite Materials for Microwave Applications
A. Mehdipour, I. Rosca,
A.-R. Sebak, C. Trueman,
S. Hoa / 1037 Effects of High Frequency Vibrations on the Compressibility of Dry Fibrous Reinforcements
J. Gutiérrez, E. Ruiz,
F. Trochu
1145 / 1170 Reliability-Based Progressive Failure Analysis for Advanced Composite Structures
W. Ji, A. Waas,
R. Raveendra / 1234 Lignin as a Reinforcement for PP Based Composites H. Li, W. Hu, T.-D. Ngo,
M.-T. Ton-That / 1134 Ultra-Strong Fibres by Super Drawing of Gel-Spun UHMWPE/SWCNT
L. Ma, F. Ko, P. Li, H. Yang, J. Guan, S. Denommee,
B. Simard / 1204 Coarse Grain Simulation of Single-Walled Carbon Nanotube – PMMA Nanocomposites
M. Rahmat, H. Ghiasi,
P. Hubert / 1242 On The Application of a Hybrid Spectral Approach to the Image-Based Measurement of Displacements at Micro-Scale in Composites
F. Mortazvi, M. Lévesque, I. Villemure / 1067 A Comprehensive Analysis of Cutting Forces During Detouring of Multilayer CFRP Laminates, I. Zaghbani,
J-F. Chatelain ,
V. Songmene , S. Berube , A. Atarsia
1215-1315 Lunch Jeanne Mance
M3 Sessions, Monday Afternoon, September 26, 2011, 1320-1500
Anjou / Auteuil / Picardie A / Picardie B / Alfred Rouleau / Argenteuil
Impact
Chair: R. Ganesan / Bio-Inspired - 1
Chair: A. Vizzini / Hyer – 3
Damage & Strength
Chair: M.-L. Dano / Nanotechnology – 2
Chair: E. Thostenson / Penetration
Chair: B. Gama / Manufacturing – 3
Out-of-A’clave
Chair: A. Loos
1320 / 1073 Effects of Barely Visible Impact Damage on Bend-Twist Coupling
R. Haynes, X. Tan,
E. Armanios / 1151 A Novel Nitrate Free Solgel Process for Production of Bioglass® 45S5
E. Rezabeigi, R. Drew,
P. Wood-Adams,
P. Proa-Flores / 1018 Damage Evolution in a Stiffened Composite Panel under Axial Load
N. Flesher, C. Herakovich / 1075 Monte-Carlo Modeling of Percolation Threshold for Conductive Composites Filled with Variable-Size Circular Nanoplateletss
A. Oskouyi, P. Mertiny / 1148 Development and Validation of a User’s Meso-Scale Based Ballistic Fabric Model with Application to the Fan Blade Containment Problem
A. Gakwaya, J. Saint-Marc, D. Nandlall, A. Bouamoul, M.-L. Dano / 1080 Void Morphology, Void Evolution and Gas Transport in Out-Of-Autoclave Prepregs
L. Farhang, G. Fernlund
1345 / 1107 Impact and Compression after Impact Tests of a Carbon/Epoxy Composite
Y. Zhang, M. Genest, D. Backman, A. Johnston,
A. Komus, M. Singh / 1123 Rigid Biofoam Composites from Functionalized Soy Oil based Biopolyurethane and Microcystalline Cellulose (MCC) for Automotive Applications
X. Luo, M. Misra,
A. Mohanty,
M. Kazemizadeh / 1200 The Strength of Double Strap Joint with Brittle and Ductile Adhesives
H.-S.Roh, C.-T. Sun / 1034 Multiscale Modeling of Polymer-Clay Nanocomposites: Interphase and Homogenization Methods
M. Pahlavan Pour,
P. Hubert, M. Lévesque / 1149 Application of a Meso-Scale Based Ballistic Fabric Model to the Development of Advanced Lightweight Engine Fan Blade-Out Containment Structure
A. Gakwaya, J. Saint-Marc, D. Nandlall, A. Bouamoul, M.-L. Dano / 1142 Gas Transport and Water Evaporation in Out Of Autoclave Prepregs
K. Hsiao, J. Kay,
G. Fernlund
1410 / 1060 Novel Compartmentalisation of Low Velocity Impact Damage
M. Yasaee, I. Bond, R.Trask / 1174 Influence of Mineral Content and Nanostructure on Mechanical Properties of Porous Hydroxyapatite/Collagen Scaffolds Created Using a Biomimetic Mineralization Process
D. Rodriguez, L. Gower / 1176 Compression Strength Effects of Layer Waviness: Progressive Failure Analysis and Experimental Validation
P. Duangmuan,
D. Adams / 1072 Mixing Strategy Effects on Physical Properties of Nanoclay Nanocomposites
H. Dalir, R. Farahania,
V. Nhim, B. Samson,
M. Lévesque, D. Therriault / 1137 Dynamic Characterization and Modeling of 3D Woven Composite Ballistic Behavior
C.-F.Yen, B. Boesl,
A. Quabili, S. Ghiorse / 1203 Air Permeability of Out-Of-Autoclave Honeycomb Structures During Processing
J. Kratz, T. Centea,
P. Hubert
1435 / 1130 Indentation Properties Of NC Dragonfly Wing By Nanoindentation
A . Talucdher, Y. Sergey,
S. Lingaiah, K. Shivakumar / 1104 The Open-Hole Off-Axis Tensile Specimen
J. Goodsell, R.B.Pipes / 1090 Morphology Characteristics, Thermal Properties and Dielectric Breakdown of LLDPE/Clay Nanocomposites
B. Zazoum, A. Ngo,
É. David, C. Daneau,
M. Fréchette / 1131 Finite Element Simulation of the Quasi-Static Penetration and Perforation Processes in Glass Fiber-Reinforced Metal Composites
C. Swin, K. Bagot,
J. Bakuckas, Jr.,
J. Awerbuch, and T.-M. Tan / 1211 The Effect of Material and Process Parameters on Tow Impregnation and Micro-Void Formation in Out-of-Autoclave Prepregs
T. Centea, P. Hubert
1505-1535 Break Jeanne Mance
M4 Sessions, Monday Afternoon, September 26, 2011, 1540-1715
Anjou / Auteuil / Picardie A / Picardie B / Alfred Rouleau / Argenteuil
Dynamic
Response – 1
Chair: H. Kim / Bio-Inspired - 2
Chair: F. Ko / Hyer – 4
Innovative Materials
Chair: C. Meyers / Nanotechnology – 3
Chair: D. Therriault / Energy Storage
Chair: B. Sankar / Manufacturing – 4
AFP
Chair: S. Donaldson
1540 / 1089 Damaged Composite Materials Under Laser Driven Shock, R. Ecault,
M. Boustie, F. Touchard,
L. Berthe, L. Chocinski,
B. Ehrhart,
C. Bockenheimer / 1162 Toughness Amplification in Natural Composites
R. Rabiei, S. Bekah,
F. Barthelat / 1201 Development and Validation of a Self-Heating Model for Multi-layered Composite Tubes under Rotating Bending Loading
C. Bakis, E. Smith,
S. Sollenberger / 1021 Study of Fracture Behaviour of Nanoclay Filled Epoxy/Basalt Fiber-Reinforced Nanocomposites
M. Bashar, U. Sundarara, P. Mertiny / 1138 Self-Activated Carbon Fiber Reinforced Shape Memory Polymer Composites
C. Ayranci, H. Yang, F. Ko / 1171 Thermal Control System Design for Automated Fiber Placement Process
S. Khan, S. Hoa, W. Xie
1605 / 1002 Analysis of Shock Response of Sandwich Composites
A.Goodarzi, H. Taylor / 1030 Pseudo-Ductile CFRP Using Bioinspired Discontinuous Architecture
R. Malkin, M. Yasee,
I. Bond, R. Trask / 1202 Self-Sealing Composites Subject to Mechanical and Thermal Cycling
J. Moll, C. Mangun,
N. Sottos, S. White / 1111 Electrical Conductivity Enhancement and Toughening of Epoxy with SWCNT: A Comparison between Bulk Resins and Laminated Composites
B. Ashrafi, Y. Matinez-Rubi, B. Simard, A. Johnston / 1096 Ultra-Violet Assisted Direct-Write Technique for the Fabrication of Nanocomposite Mechanical Energy Storage Devices
M. Becker, D. Therriault / 1101 A Laser-Ultrasonic Inspection System for Large Structures Fabricated by Automatic Fiber Placement
A. Blouin, C. Padioleau,
C. Néron, J.-P. Monchalin, M. Hojjati, M. Choquet
1630 / 1059 Dynamic Response of Thickness and Width-Tapered Laminated Composite Beam-Columns Using Rayleigh-Ritz Method
V. Badagi, R. Ganesan / 1163 A Biomimetic Composite Duplicating the Structure and Micromechanics of Nacre
D. Zhu, F. Barthelat / 1121 Snap-Through of Unsymmetric Cross-Ply Laminates using Distributed Piezoelectric Actuators, M.-L. Dano,
M. Jean-St-Laurent,
A. Fecteau / 1220 Network Structure and Electrical Conduction in Carbon Nanotube Modified Polymers
C. Cattin, P. Hubert / 1011 Assessment of Manufacturing Limits and Process-Ability for Composite Structures with Embedded Energy Devices
F. Gasco, P. Feraboli / 1169 Determination of the Optimal Manufacturing Parameters of Thermoplastic Composite Rings Made by Automated Fiber Placement Technique
F. Shadmehri, X. Cai,
M. Hojjati, J. Chen, S. Hoa
1655 / 1097 Adhesive Bond Testing of Composites by Laser Shockwave
M. Perton, A. Blouin,
J.-P. Monchalin, J. Robles, J. Sands, R. Cole,
A. Johnston / 1164 Deformation and Fracture Mode Transition in Nacre and Bonelike Composite Materials
R. Rabiei, S. Bekah,
F. Barthelat / 1209 The Effect of Nanoclay Content and Dispersion on the Material Properties of PET and PLA Nanocomposites
M. Yourdkhani, P. Hubert, T. Mousavand
1725-1810 American Society for Composites General Membership Meeting (all welcome) Alfred Rouleau A and B
1815 Conference Reception Café Fleuri
Tuesday Morning, September 27, 2011, 0800-0850 Plenary Lecture: "Composite - Innovative Smart Systems”
Alfred Rouleau Room Chief Scientist, James Chang, US Army Research Laboratory
T1 Sessions, Tuesday Morning, September 27, 2010, 0900-1015
Anjou / Auteuil / Picardie A / Picardie B / Alfred Rouleau / Argenteuil
ONR - 1: Core Materials
Chair: Y. Rajapakse / Time-Dependent Response
Chair: M. Levesque / Hyer – 5
Analysis
Chair: D. Adams / Nanotechnology – 4
Chair: D.Therriault / Structures - 2
Chair: A. Ferreira / Maufacturing – 5
Chair: G. Fernlund
0900 / 1043 Characterization and Constitutive Modeling of Polymeric Foams under Static and Dynamic Loading
I. Daniel, J.-M. Cho,
B. Werner / 1124 Experimental Investigation of Effects of Crystallinity on Viscoelastic Properties of Glass Fibre Reinforced Polypropylene
K. Gordnian, A. Milani,
A. Poursartip / 1033 Shear Behavior of Thin Plain Weave Composites Subjected to Transverse Shear
J. Whitcomb,
Y. Jonnalagadda / 1208 Controlled-Deposition of Multi-Walled Carbon Nanotubes bn Fibers by Circulative High-Energy Sonication and Electrophoretic Deposition, Q. An,
A. Rider, E. Thostenson / 1036 Composite Skin Snap-Through Buckling under Transient Dynamic Pressure Load
S. Caulfield / 1217 Pultrusion System for Continuous Fiber Reinforced Thermoplastic Composite with Braiding Technique, D.Hatano, A.Nakai, M.Takagi, A.Ohtani
0925 / 1246 Dynamic Fracture of Sandwich Core Foams
A Kidane, G. Ravichandran / 1106 Analyzing Thermo-Electro-Mechanical Response of Active Composites
C.-H.Lin, A. Muliana / 1017 Linear and Nonlinear Analyses of Symmetrically and Unsymmetrically Laminated Clamped Rectangular Plates
A. Jilani, M. Hyer / 1165 Improvement of Temperature Distribution Across Thick Thermoset Composite Laminates Using Carbon Nanotubes
P. Rowghanian, S. Hoa / 1027 Stress Analysis for Composite I- Beams by a Non-Conventional Method
J. Parambil, W. Chan,
K. Lawrence, V. Sanghavi / 1139 Fabrication of Curved Parts by Flexible Injection: Influence of Processing Conditions on Composite Quality and Analysis of Distortion
P. Causse, E. Ruiz,
F. Trochu
0950 / 1219 Stress Relaxation Behavior of Polyurethane Foams in Tension and Shear: Experiment and Model Prediction
B. Barua, M. Saha / 1181 Experimental Validation of Bistable Composite Panel Response
S. Tawfik, E. Armanios / 1026 Investigation into Electromagnetic Interference of Two Nanocomposites Under Tensile Load and Thermal Fatigue, S. Mall,