1. Lin, K.-F., and Leong, J.C.*, Analysis of the Cylindrical Magnetic Couette Flow in A

梁智創教授歷年著作一覽表

一 . 期刊論文

1.  Lin, K.-F., and Leong, J.C.*, “Analysis of the Cylindrical Magnetic Couette Flow in a Radially Magnetized Thin Porous Annulus,” Journal of Porous Media, accepted. (SCI)

2.  Wang, Y.-N., Leong, J.C., Chen, J.-Y., and Tsai, C.-H.*, “Reduction in Motorcyclist Pollutant Exposure Intensity via the Aid of a Porous Front Fender and a Rear Vent,” Aerosol and Air Quality Research, accepted. (SCI)

3.  Lo, Y.S., Fang, C.J., Tsao, L.C., and Leong, J.C.*, “Water Tank Simulation of a Continuous Hot-Dip Galvanized Zinc Pot,” Lecture Notes in Electrical Engineering: Intelligent Technologies and Engineering Systems, Vol. 234, pp 813-819, Feb. 2013. (EI)

4.  Kuo, J.-S., and Leong, J.C.*, “Analysis of a Conducting Fluid in a Thin Annulus with Rotating Insulated Walls under Radial Magnetic Effect,” Applied Mathematical Modelling, Vol. 37, pp. 3021-3035, Mar. 2013. (NSC98-2221-E-020-027-) (SCI)

5.  Wang, Y.N., Lin, T.T., Leong, J.C., Hsu, Y.T., Yeh, C.P., Lee, P.H., and Tsai, C.H.*, “Numerical Investigation of High-Concentration Photovoltaic Module Heat Dissipation,” Renewable Energy, Vol. 50, pp. 20-26, Feb. 2013. (NSC99-2221-E-020-030) (SCI)

6.  Yan, Y.-A., Tseng, C.-Y., and Leong, J.C.*, “Fabrication of the Control Module for a Solar Powered Cooling Device,” Combustion Quarterly, Vol. 22, No. 1, pp. 77-85, Feb. 2013.

7.  Guo, S.-W., and Leong, J.C.*, “MHD Couette Flow in Cylindrical Porous Annulus with Perfectly Conducting Walls,” Applied Mechanics and Materials, Vol. 284-287, pp. 829-833, Jan. 2013. (NSC100-2221-E-020-022-) (EI)

8.  Chang, C.-L., Wu, Z.Y., and Leong, J.C.*, “Water Leakage through a Small Opening,” International Journal of Hydraulic Engineering, Vol. 1(4), pp. 25-31, 2012.

9.  Hung, S.L., and Leong, J.C.*, “Effects of Regional Magnetic Field on Rotating MHD Flow Field of Unity Magnetic Prandtl Number,” Journal of Applied Mathematics, Article ID 804105, 17 pages, doi:10.1155/2012/804105, Jul. 2012. (SCI).

10.  Tsai, C.H., Kuo, J.S., and Leong, J.C.*, “A Theoretical Analysis of MHD Couette Flow in a Thin Cylindrical Annulus,” Advanced Science Letters, Vol. 12, pp. 120-124, Jun. 2012 (NSC98-2221-E-020-027).

11.  Yan, Y.-A., Tseng, C.-Y., and Leong, J.C.*, “Feasibility of Solar Powered Cooling Device for Electric Car,” Energy Procedia, Vol. 14, pp. 887-892, Mar. 2012. (EI)

12.  Tsai, B.-D., Hsu, Y.T., Lin, T.T., Fu, L.-M., Tsai, C.H., and Leong, J.C.*, “Performance of an INER HCPV Module in NPUST,” Energy Procedia, Vol. 14, pp. 893-898, Mar. 2012. (EI)

13.  Leong, J.C.*, and Lai, F.C., “Visualization of Flow in a Sintered Journal Bearing through Hele-Shaw Analogy,” Experimental Thermal and Fluid Science, Vol. 39, pp. 228-236, Mar. 2012. (SCI)

14.  Lee, C-Y., Leong, J.C., Wang, Y.-N., Fu, L.-M., and Chen, S.-J., “A Ferrofluidic Magnetic Micropump for Variable-Flow-Rate Applications,” Japanese Journal of Applied Physics, Vol. 51, 047201, 03/2012 (SCI).

15.  Tsao, L.C.*, Wu, H.Y., Leong, J.C., and Fang, C. J., “Flow Stress Behavior of Commercial Pure Titanium Sheet during Warm Tensile Deformation,” Materials & Design, Vol. 34, pp. 179-184, Feb. 2012. (SCI)

16.  Chen, F.L., and Leong, J.C.*, “On Computational Simulation of a Bamboo Charcoalization Kiln,” Combustion Quarterly, Vol. 21, No. 1, pp. 15-27, Feb. 2012.

17.  Leong, J.C.*, Chang, C.-L., and Chu, C.-H., “Smoke Propagation of Different Subway Station Scenarios,” Combustion Quarterly, Vol. 21, No. 1, pp. 67-83, Feb. 2012.

18.  Leong, J.C.*, Chang, C.-L., Chen, Y.-C., and Chen, L.-W., “Smoke Propagation in an Inclined Semi-Circular Long Tunnel,” Advanced Materials Research, Vol. 446-449, pp. 2143-2148, Jan. 2012. (EI)

19.  Chen, F.L., and Leong, J.C.*, “Smoke Flow Phenomena and Turbulence Characteristics of Tunnel Fires,” Applied Mathematical Modelling, Vol. 35, No. 9, pp. 4554-4566, Sept. 2011. (SCI)

20.  Leong, J.C., Tsao, L.C.*, Fang, C.J., and Chu, C.-P., “Effects of Nano-TiO2 Addition on the Microstructure and Bonding Strengths of Sn3.5Ag0.5Cu Composite Solder BGA Packages with Immersion Sn Surface Finish,” Journal of Materials Science: Materials in Electronics, Vol. 21, pp. 1443-1449, Sept. 2011. (SCI)

21.  Chang, C.L., Leong, J.C., Hong, T.F., Wang, Y.N., and Fu, L.M.*, “Experimental and Numerical Analysis of High-Resolution Injection Technique for Capillary Electrophoresis Microchip,” International Journal of Molecular Sciences, Vol. 12, No. 6, pp. 3594-3605, Jun. 2011. (SCI)

22.  Chang, C.-L., Ju, W.-H., Liou, C.-L., Leong, J.C., and Fu, L.-M.*, “Rapid Microfluidc Biochips Fabrication by Femtosecond Laser on Glass Substrate,” Key Engineering Materials, Vol. 483, pp. 359-363, 2011. (EI)

23.  Hong, T.-F., Leong, J.C., Lin Liou L.-K., Tsai, C.-H.*, and Fu, L.-M.*, “Magnetic Microfluidic Mixer,” Key Engineering Materials, Vol. 483, pp. 354-358, 2011. (EI)

24.  Tsai, C.H., Wang, Y.N., Tai, C.H., Miao, J.M., and Leong, J.C.*, “Effects of Heating Vents in a Tunnel-Type Dryer,” Advanced Materials Research, Vol. 189-193, pp. 1757-1760, Feb. 2011. (EI)

25.  Chang, C.-L., Ju, W.-H., Liou, C.-L., Leong, J.C.*, and Fu, L.-M.*, “Rapid Microfluidc Biochips Fabrication by Femtosecond Laser on Glass Substrate,” Key Engineering Materials, Vol. 483, pp. 359-363, 2011. (EI)

26.  Leong, J.C., Hong, T.-Y., and Chang, C.-L.*, “Backlayering Effect and Spreading of Smoke in Sloped Road Tunnels with Different Cross-Sectional Geometries,” Combustion Quarterly, Vol. 20, No. 1, pp. 46-54, Jan. 2011.

27.  Leong, J.C.*, Tseng, C.-Y., Hsiao, Y.-F., and Tsai, B.-D., “Cabin Heat Removal from an Electric Car,” World Electric Vehicle Journal, Vol. 4, pp. 760-765, 2010. (EI)

28.  Chang, C.-L., Tseng, C.-Y., Hung, S.-L., and Leong, J.C.*, “Magnetic Suppression of Cylindrical MHD Couette Flow Vortex,” Proceedings of 2010 International Symposium on Computer Communication Control and Automation (3CA), Vol. 1, pp. 81-84, 2010. (EI)

29.  Wang, Y.-N., Tseng, C.-Y., Huang, Y.-L., and Leong, J.C.*, “Investigation of 2004 Ferrari Formula One race car wing effects,” Proceedings of 2010 International Symposium on Computer Communication Control and Automation (3CA), Vol. 1, pp. 85-88, 2010. (EI)

30.  Li, C.-T., Tai, C.-H., and Leong, J.C.*, “Simulation of Ventilated Tunnel Fires using Fine-Bubble Modeling Technique,” Journal of Flow Visualization & Image Processing, Vol. 17, Issue 2, pp. 155-175, 2010. (EI)

31.  Chang, C.-L., Chang, C.-C., and Leong, J.C.*, “Planning for a Shopping Mall Fire Outbreak Egress,” Combustion Quarterly, Vol. 19, No. 1, pp. 52-60, Feb. 2010.

32.  Wang, Y.-N.*, Leong, J.C., Chang, C.-L., Tai, C.-H., Tsai, C.-H., Fu, L.-M., and Miao, J.-M., “On Chip Particle Differentiation Utilizing Forward Scattered Light and Fluorescence Light with Passive Focusing,” Proceedings of ASME 2009 2nd Micro/Nanoscale Heat & Mass Transfer International Conference, Vol. 1: Micro/Nanofluidics and Lab-on-a Chip, pp. 137-142, Shanghai, China, Dec. 18-22, 2009 (EI).

33.  Leong, J.C., Jin, K.-W., Shiau, J.-S., Jeng, T.-M., and Tai, C.-H.*, “Effect of Sinter Layer Porosity Distribution on Flow and Temperature Fields in Sinter Cooler,” International Journal of Minerals, Metallurgy, and Materials, Vol. 16, No. 3, pp. 265-272, Jun. 2009 (SCI).

34.  Hong, T.-F., Ju, W.-J., Leong, J.C., Lin, C.-F., Tsai, C.-H.*, and Fu, L.-M.*, “Rapid Fabrication of Microfluidic Chip on PMMA Substrate by CO2 Laser,” Nanotechnology and Precision Engineering, Vol. 7, No. 4, pp. 351-354, July 2009 (EI).

35.  Tsai, C.-H., Fu, L.-M., Tai, C.-H., Huang, Y.-L., and Leong, J.C.*, “Computational Aero-acoustic Analysis of a Passenger Car with a Rear Spoiler,” Applied Mathematical Modelling, Vol. 33, pp. 3661-3673, Sept. 2009 (SCI).

四 . 研討會論文

1.  Wang, Y.-N., Fu, L.-M., Tsai, C.-H., Hsu, Y.-T., Lin, T.-T., and Leong, J.C.*, “HCPV Module Temperature Prediction: A Case Study based on Measurements at NPUST,” The 2013 International Applied Science and Precision Engineering Conference (ASPEC2013), C1033, Sun Moon Lake, Taiwan, Sept. 18-22, 2013.

2.  Chen, Y.-C.*, Chen, L.-W., and Leong, J.C., “Finite element simulations of thermal affected zone during bone drilling,” 2013 4th International Conference on Information Technology for Manufacturing Systems (ITMS 2013), ID#183, Auckland, New Zealand, Aug. 28-29, 2013.

3.  Chang, C.-L., Li, Y.-M., and Leong, J.C.*, “Analysis of Fluid Film Lubrication of an MHD Journal Bearing Subjected to an Axially Applied External Magnetic Field,” 2013 The 2nd International Conference on Industrial Design and Mechanics Power (ICIDMP2013), ID#30, Nanjing, China, Aug. 24-25, 2013.

4.  Li, Y.-M. and Leong, J.C.*, “Preliminary Study of MHD Journal Bearing in Agricultural Machinery,” The 2013 International Symposium on Agriculture in the Tropic (ISAT), AE003-P, Pingtung, Taiwan, May 30, 2013.

5.  Lo, Y.S., Fang, C.J., Tsao, L.C., and Leong, J.C.*, “Water Tank Simulation of a Continuous Hot-Dip Galvanized Zinc Pot,” 2012 First International Conference on Intelligent Technologies and Engineering Systems (ICITES 2012), paper # 95, Changhua, Taiwan, Dec. 13-15, 2012.

6.  蔡政彥、李昱民、梁智創* “大客車火災煙流分析”，中國機械工程學會第二十九屆全國學術研討會，論文#1155，高雄，2012年12月7-8日。

7.  郭獻文、陳彩蓉、梁智創* “流體電磁式制動器之數學模型”，中國機械工程學會第二十九屆全國學術研討會，論文#1639，高雄，2012年12月7-8日。

8.  張智瑋、王耀男、梁智創* “車室成員熱舒適度感受分析”，中國機械工程學會第二十九屆全國學術研討會，論文#1840，高雄，2012年12月7-8日。

9.  方俊仁*、羅宇盛、梁智創 “熱浸鍍鋅槽流場可視化設備建立與模擬研究”， 中華民國力學學會第三十六屆全國力學會議，A-043，國立中央大學，101年 11 月 16-17 日。

10.  Guo, S.-W., and Leong, J.C.*, “MHD Couette Flow in Cylindrical Porous Annulus with Perfectly Conducting Walls,” The 2nd International Conference on Engineering and Technology Innovation 2012 (ICETI2012), ID#95, Kaohsiung, Taiwan, Nov. 2-6, 2012.

11.  陳映舟、張智瑋、梁智創* “GEM e4電動車外型與流場分析”，第四屆全國風工程研討會論文集，175-182頁，高雄，2012年10月19日。

12.  Tsai, C.-H., Wang, Y.-N., and Leong, J.C.*, “A Proposed Energy Rating Methodology for the HCPV Module Stationed at Southern Taiwan,” Proceeding of the 4th International Conference on Applied Energy (ICAE 2012), paper #A10813, pp. 3481-3488, Suzhou, China, Jul. 5-8, 2012.

13.  蔡伯東、蔡建雄、梁智創*、徐耀東、林聰得、許怡儒 “南台灣日照與聚光型太陽能模組特性初步探討”，2012中華民國燃燒學會第22屆學術研討會論文集，P-012，高雄，4月21日，2012。

14.  Leong, J.C.*, Chang, C.-L., Chen, Y.-C., and Chen, L.-W., “Smoke Propagation in Inclined Semi-Circular Long Tunnel,” 2nd International Conference on Structures and Building Materials (ICSBM 2012), paper #B2317, Hangzhou, China, Mar. 10-11, 2012.

15.  Yan, Y.-A., Tseng, C.-Y., and Leong, J.C.*, “Feasibility of Solar Powered Cooling Device for Electric Car,” 2011 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), paper #264, Bangkok, Thailand, Dec. 26-28, 2011.

16.  Tsai, B.-D., Hsu, Y.T., Lin, T.T., Fu, L.-M., Tsai, C.H., and Leong, J.C.*, “Performance of an INER HCPV Module in NPUST,” 2011 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), paper #472, Bangkok, Thailand, Dec. 26-28, 2011.

17.  郭獻文、張金龍、梁智創* “非均勻徑向磁場下磁圓柱庫頁流之分析”，中國機械工程學會第二十八屆全國學術研討會，A02-011，台中，12月10~11日，2011。

18.  羅宇盛、陳柏安、方俊仁、曹龍泉、梁智創* “含化學反應之熱浸鍍鋅槽數值分析”，中國機械工程學會第二十八屆全國學術研討會，A02-023，台中，12月10~11日，2011。

19.  洪敬閔、方俊仁、曹龍泉、梁智創* “熱浸鍍鋅線鍍鋅槽流場可視化研究設備建構與成果”，中國機械工程學會第二十八屆全國學術研討會，A02-024，台中，12月10~11日，2011。

20.  Tsai, C.-H., Kuo, J.-S., and Leong, J.C.*, “A Theoretical Analysis of MHD Couette Flow in Thin Cylindrical Annulus,” 2011 International Conference on Mechatronics and Materials Processing (ICMMP2011), T026, Guangzhou, China, Nov. 18-20, 2011.

21.  Tsai, C.-H.*, Wang, Y.-N., Leong, J.C., and Hayashida, R., “Scooter Front Fender Design for Motorcyclist Pollutant Exposure Level Improvement Utilizing CFD Simulation,” Proceedings of the 2011 International Conference on Aerosol Science and Technology and 2011 Symposium of PM2.5 Regulated Standard and Control Strategy, pp. 259-260., Oct. 2011.

22.  陳勁昕、曹龍泉*、梁智創、方俊仁、郭為元 “熱浸鍍鋅鋼之合金化鍍層的組織和生長動力學研究”，2011兩岸綠色暨防災科技學術研討會，B15，屏東，台灣，10月12日，2011。

23.  洪聖倫、林榮璋、蔡建雄、梁智創* “奈米碳球比熱測量研究” ，2011兩岸綠色暨防災科技學術研討會，B29，屏東，台灣，10月12日，2011。

24.  顏堉安、曾全佑、梁智創* “電動車輛太陽能散熱系統控制模組設計與製作” 2011兩岸綠色暨防災科技學術研討會，F16，屏東，台灣，10月12日，2011。

25.  Hsu, Y.T., Lin, T.T., Fu, L.-M., Tsai, C.-H., Tsai, B.-D., and Leong, J.C.*, “On-site Measurement of a HCPV Module in NPUST,” 2011 The International Conference on Green Technologies (ICGT), paper #11, Pingtung, Taiwan, Oct. 12-15, 2011.

26.  Leong, J.C.*, Tai, C.-H., Wang, Y.-N., and Miao, J.-M., “Effects of Heating Vents in a Tunnel-Type Dryer,” International Conference on Manufacturing Science and Engineering (ICMSE 2011), D8040, Guilin, China, Apr. 9-11, 2011.

27.  梁智創*、陳柏安、方俊仁 “熱浸鍍鋅線鍍鋅槽流場模擬研究”，中國機械工程學會第二十七屆全國學術研討會，AA07-010，台北，12月10~11日，2010。

28.  梁智創*、林秋豐、蕭伊帆、蔡伯東 “散熱裝置對車廂溫度與流場之影響”， 2010中華民國第十五屆車輛工程學術研討會，A-005，台南，10月30日，2010。

29.  梁智創*、王耀男、顏堉安 “車廂內溫室效應之探討”， 2010中華民國第十五屆車輛工程學術研討會，A-006，台南，10月30日，2010。

30.  Leong, J.C.*, Tseng, C.-Y., and Yan, Y.-A., “Experimental Study of Greenhouse Effect in the Cabin of an Electric Car Model,” EVS 25 - The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Shenzhen, China, Nov. 5-9, 2010.

31.  Leong, J.C.*, Tseng, C.-Y., Hsiao, Y.-F., and Tsai, B.-D., “Cabin Heat Removal from an Electric Car,” EVS 25 - The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Shenzhen, China, Nov. 5-9, 2010.

32.  Leong, J.C.*, Chang, C.-L., and Tai, C.-H., “Magnetic Suppression of Plasma Instability in a Rotary Cylindrical Confinement,” The 2010 International Conference on Green Technologies, Paper MT-06, Pingtung, Taiwan, Oct. 6~8, 2010.

33.  Chang, C.-L., Tseng, C.-Y., Hung, S.-L., and Leong, J.C.*, “Magnetic Suppression of Cylindrical MHD Couette Flow Vortex,” the 2010 International Symposium on Computer, Communication, Control and Automation (ISBN: 978-1-4244-5566-9), pp. 81-84, Tainan, Taiwan, May 5-7, 2010.

34.  Wang, Y.-N., Tseng, C.-Y., Huang, Y.-L., and Leong, J.C.*, “Investigation of 2004 Ferrari Formula One Race Car Wing Effects,” the 2010 International Symposium on Computer, Communication, Control and Automation (ISBN: 978-1-4244-5566-9), pp. 85-88, Tainan, Taiwan, May 5-7, 2010.

35.  Wang, Y.-N.*, Leong, J.C., Chang, C.-L., Tai, C.-H., Tsai, C.-H., Fu, L.-M., and Miao, J.-M., “On Chip Particle Differentiation Utilizing Forward Scattered Light and Fluorescence Light with Passive Focusing,” ASME 2009 2nd Micro/Nanoscale Heat & Mass Transfer International Conference, MNHMT2009-18298, Shanghai, China, Dec. 18-22, 2009.

36.  Leong, J.C.*, and Lai, F.C., “Flow Visualization in a Partially Porous Annulus,” the 7th Pacific Symposium on Flow Visualization and Image Processing, paper no. 23A-1, Kaohsiung, Taiwan, Nov. 13-16, 2009.

37.  Leong, J.C.*, Lin, G.F., and Li, C.T., “Magnetic Flow Field Subjected to Non-Uniform External Magnetic Field,” the 7th Pacific Symposium on Flow Visualization and Image Processing, paper no. 23A-3, Kaohsiung, Taiwan, Nov. 13-16, 2009.

38.  Fu, L.-M., Tai, C.-H., Chen, Y.-C., and Leong, J.C.*, “Influence of Uniform Radial Magnetic Field on Smart Magnetic Fluids,” Asian Pacific Conference for Materials and Mechanics 2009 (APCMM 2009), paper no. 52, Yokohama, Japan, Nov. 10-13, 2009.

39.  Leong, J.C.*, Tsai, C.-H., and Li, C.-T., “Development of Training Software for Hsuehshan Tunnel Operators,” Proceedings of the 13th World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2009, Vol. II, pp. 69-74, Orlando, USA, Jul. 10-13, 2009 (ISBN-13: 978-1-934272-59-6).

40.  Leong, J.C.*, Li, C.T., Tsai, C.H., and Hsu, M.S., “Short-Loop Ventilation of Hsuehshan Tunnel Fire,” Proceedings of 2009 International Conference on Environmental Quality Concern, Control and Conservation, pp. IIB-35~IIB-42, Kaohsiung, Taiwan, May 22-23, 2009.

41.  Leong, J.C.*, Chang, C.L., Chen, P.A., and Wang, Y.N., “Analysis of Ventilation in Sanitary Sewerpipes,” Proceedings of 2009 International Conference on Environmental Quality Concern, Control and Conservation, pp. IIIA-13~IIIA-20, Kaohsiung, Taiwan, May 22-23, 2009.