Changes in the Program Version 15.0 Compared with the 14.0 Program Version

Changes in the program version 15.0 compared with the 14.0 program version

1. New “PD/45“ and “PD/45N“ main profiles are included in the program.

2. New “SP45PD” side lock is included in the program.

3. It is possible to choose a new suspension type - “Reinforced security lock”.

4. New “RG2U“, “RG3U“, “RG4U“, “RGM2U“, “RGM3U“ and “RGM4U“ security locks are included in the program.

5. New “SF45/137u“, “SF45/150u“, “SF45/165u“, “SF45/180u“, “SF45/205u“, “SF45/137u-B“, “SF45/150u-B“, “SF45/165u-B“, “SF45/180u-B“ and “SF45/205u-B“ end caps are included in the program. Thereby, new parameters (options) are also included in the program: “Choice of 45° end caps, sizes 137-205” (s. program part “Parameters”, tab “Calculation”), which allows or forbids the choice of certain 45° end cap types in sizes 137-205 when calculating roller shutters.

6. New “TG/U” strap guide is included in the program.

7. New “BG/U” rope guide is included in the program.

8. New “GD9/U“, “GD14/U“ and “M-GD9/U“ entry guides are included in the program.

9. New “KMU/G” universal bracket is included in the program.

10. New “KMU/WG” universal bracket is included in the program.

11. New “FK/SF-B” kit of fasteners for end caps is included in the program.

12. New “TP170” pulley is included in the program.

13. New “AriesS-4/14” electric motor is included in the program.

14. New “R7010563” Alutech sticker is included in the program.

15. When calculating roller shutters with “GR70x34*“ guide rail, the choice of “SP/77-MSM“ and “SP/77-MSW“ side locks is forbidden.

16. In case the 137 end cap was selected in the process of calculation, the choice of “Solus 2 PA 40/12“ electric motor is forbidden.

17. There are two additional columns in the window "Orders", tab "Order composition", in the window of main profile selection in the table with main profiles: “Max curtain width” and “Max curtain surface”.

18. The sorting in the table with main profiles was changed (window "Orders", tab "Order composition", window of main profile selection).

19. New additional option “Show only popular profiles” is included in the window “Orders”, tab "Order composition", in the window of main profile selection in the toolbar (please note, that this option is selected on default).

20. “TP155“ pulley is excluded from the program.

21. "TP190" pulley is excluded from the program.

22. "Aries 4/14" electric motor is excluded from the program.

23. “Apollo 30/17 NHK RTS“, “Atlas15/12“, “Ceres 10/17 NHK RTS“, “Solus 2 PA 15/12“, “Solus 2 PA 8/12“ and “Vectran 50/12 NHK RTS“ electric motors are excluded from the program.

24. “Radio 8113 IP65-1000“ radio control, “Intro ll 8505-50-6“ scenario switch, “Intro ll 8505-50-8“ scenario switch, “Nero ll 8761 IP 65“ transcoder and “P-NERO 8022“ control relay are excluded from the program.

25. “GR100x35IE“ guide rails in colours: “119“ (“golden oak“), “149“ (“black cherry”) and “159” (“nut“) are excluded from the program.

26. The advertising text shown at the top of the “Commercial offer” report was edited (if you have edited this report template before, please take this fact into account, because the templates edited by the user are not updated in case of program update).

27. The xml file format used for export/import of roller shutter orders was changed: the “SI_Type” attribute has new permissible values (s. Help).

28. All found errors are corrected.