==SHOP EQUIPMENT=
Starline SL-1200-15B-17 Skydrol Hydraulic Actuator Test Bench, Flow Rate 0-15 GPM, Adjustable Pressure 300-3500 PSI w/Hand Pump for up to 6.000 PSI Static Test
Starline SL-1200-15B-17 5606 Hydraulic Actuator Test Bench, Flow Rate 0-15 GPM, Adjustable Press 300-3500 PSI
Lagun Republic FTV-1 Vertical Milling Machine, 3 HP, 50-3900 RPM, 42” x 9” 3-Slot Table, Auto Table Feed, Newall C80 Digital Readout X/Y
Lagun Republic FTV-2 Vertical Milling Machine, 3 HP, 50” x 10” 3-Slot Table, 140-4200 RPM, Auto Feed Table & Knee Auto Height Adjustment, Topaz Digital Readout X/Y
Crown Engine Lathe Mdl 4/200B, S/N C40120, Mfg 1981, 24” Swing, 3” Howell Spindle w/Tapper Attachment
Enco Mdl 110-2072 Gap Bed Lathe S/N 886795, Mfg 1988, Metal Lathe, 10” Swing, 48” Bed, 1.5” Howell Spindle
Bridgeport Series I Vertical Milling Machine, 1-1/2 HP Motor, 60-4200 RPM Spindle Speed, 9’ x 42” 3-Slot Spacer, Auto Feed Table, 7” Riser Block
Delta DEA Mdl 3406 Gantry Type CMM, Measuring Envelope 128” x 72” x 54” (XYZ) PC-DMIS Software
(2) Shop Built Submergible Fuel Pump Test Benches
Electrical Mechanical Actuator Test Stand
Generator Test Stand w/Sun Electric Mdl A-3 Veri Drive, w/Load Bank, 400/500 Amp, 25 HP Motor Drive RPM 2,000/Min, 11,000 Max
Shop Built Engine Driven Hydraulic Pump Test Stand 5,000 PSI
50 HP Dual Head Low Speed 1000 RPM-2350 RPM, Vari-Drive High Side 3,000-11,600 RPM
Type A-1 Generator Test Stand, 25 HP Single Drive w/550 AMP Load Bank up to 11,000 RPM
15 HP Dual Head Low-1,100-5,500 RPM, Vari Drive High 2,400-12,000 RPM
75 HP Single Hand Vari-Drive
Rectifier, 25 HP Vari-Drive Single Head
United Type A-1 Load Bank, 60 KW, 40 KVAR, 3-Phase, 400 Cycle A/C
Miller Synchrowave 250 cc AC/DC Welding Power Source Tig Gun, Miller Cool Mate 3 Water Cooler, Foot Control
Empire Mdl PF-2638 Media Blast Cabinet w/Re-Claimer & Filter, 36’L x 25’W x 26’D Inside Measurement
Blue M Mdl POM7-136C-3, Temp Range 343˚C/650˚F, Digital Readout, 38’ x 20’ x 24’ Inside Measurement
Hotpack Mdl 35722 Electric Oven Temp Range 35˚C to 260˚C
Craftsman Quick Change Metal Turning Lathe, 34” Centers, 12” Swing, 46” Bed
Safety Kleen Mdl 81 Agitating Parts Cleaner
Micro Balancing Mdl MU6-T2 Dynamic Balancing Machine, Capacity Max Rotor Wt130 Lbs, 24”, Speed Range 600-4500 RPM
Blue Wave Ultrasonic Cleaning Bench, 18’L x 12’W x 10’D Tank
Rutland 12-Speed Milling/Drilling Machine
Townsend Aerospace Mdl TA8150-PHD-2429D Hand Held Hot Dimpler, Dual Heater
Bliss C-60 Punch Brake
Walsh Hot Joggle Punch Press
Chicago 8’ Sheet Metal Brake
Barth 8’ Power Sheer
Niagara Mdl 180 Tubing Bender
Dust Hog Mdl SC1700 Supra-Conic Cartridge Dust Collector
Sand Blast Cabinet 14”D x 25”H x 40”W Inside Height
20 Ton H Frame Hydraulic Press
12-Speed Industrial Bench Drill Press
TAFA Mdl 30-8A Wire Spray Gun Power Unit, Has Rotating Table w/Additional Rolls of Wire
Sun Horizontal Honing Machine MBB2900
Jet Mdl 16 Bench Top Milling/Drilling Machine
300 AMP Rectifier
Lapmaster 15 Lapping Machine
Famco #2 Arbor Press
DC Rectifier P/N 2004-400-1, 28V DC Output, 400 Amp
Armature Cutter
Electric Parts Cleaner
Shop Built Blower Test Bench
Dayton 8’ Pedestal Bench Grinder
(2) Bench Vices
Bench Grinders
Jet #3 Arbor Press
Rimac Spray Tester
Misc Bearing Washing Cans
5’ x 5’ x 6’ Paint Booth
Page Mdl PS2 DC Power Supply, 30V, 30 Amp
Chicago 20 Gal Electric Parts Washer
Cannon Micro Printer 50 Microfiche Reader/Printer
Coventry Gauge-Run Out Measuring Fixture
==TEST BENCHES & BOXES==
Magtrol Mdl HD-705-6 Dynamometer, 50.0 Lb/In w/Magtrol Mdl 6200 Controller Display Readout
Type M-3 Tachometer Test Box O-4600 RPM
Ray Electronics Mdl 7412 Nose Gear Steering Amplifier Test Set
Shop Built Beachcraft L/G Flap Motor Test Bench
(7) Electrical Mechanical Test Benches. These benches are set up to test various Motors, Trim Actuators, Etc. with several brake-out boxes.
==AVIONICS TEST EQUIPMENT==
Textronic Mdl 468 Digital Storage Oscilloscope
(2) Weller Ungar Mdl 4624 Solder De-Solder Stations
(3) Pace Mdl ST-25 Soldering Station
(2) Astron Mdl VLS-10M Power Supply, 40 Volt, 15 Amp
Tenma Mdl 72-6854 Dual 35 Volt, 10 Amp Power Supply Unit
Wavetek Model 136 VCG/VCA Generator
(4) Simpson Mdl 260 Volt/Ohm Millimeters
Simpson Mdl 401 Insulation Tester
Fluke Mdl 8012A Digital Multimeter
HP Mdl 331A Distortion Analyzer
Leader Mdl LAG-26 Audio Generator
Sprague Mdl TO-611 Capacitor Analyzer
Hewlett Packard Mdl 200B Audio Oscillator
Biddle Mdl 72-430 Portable Wheatstone Bridge
(6) Eico Mdl 1171A & 1120 Decade 3 Boxes
Tenma 2 Mhz Sweep Function Generator
==HAND TOOLS==
24” Digital Readout Veneer Caliper
(2) Dial Veneer Calipers, 12” Brown & Sharp, Mitutoyo
Rigid Flaring Tools 3/16” – ¾”, 37˚
Misc. Torque Wrenches
Depth Micrometers
Ametek Mdl 1893 Digital Phototach
Burndy Cable Swedger
Manual Rivet Squeezer
B&D Wizard Rotary Tool
Misc New High Speed Drill Bits
==OVERHAULED JET AIRCRAFT ENGINE INLETS==
(2) Hawker L/H Engine Inlet O/H w/8130
Hawker R/H Engine Inlet O/H w/8130
Hawker R/H Engine Inlet (Rep w/8130)
Falcon 50XP L/H Engine Inlet (Rep w/8130)
(2) Falcon 50 L/H Engine Inlet (Rep w/8130)
Cessna Citation 10 Inlet 4954101-19 (Rep w/8130)
Lear 45 L/H Engine Inlet, O/H w/8130
Lear 35 L/H Engine Inlet, O/H w/8130
Lear 35 R/H Engine Inlet, O/H w/8130
Lear 35 R/H Engine Inlet, O/H w/8130
Lear 35 L/H & R/H Engine Inlets (A/R)
Lear 31 R/H & L/H Engine Inlets, O/H w/8130
Westwind L/H Engine Inlet O/H w/8130
(4) Westwind L/H Engine Inlet (Rep w/8130)
(2) Westwind R/H Engine Inlet (Rep w/8130)
Falcon 10 R/H Engine Inlet (Rep w/8130)
(3) Falcon 10 L/H Engine Inlet (Rep w/8130)
Challenger 601 L/H Engine Inlet (Rep w/8130)
Challenger 601 R/H Engine Inlet (Rep w/8130)
Falcon 50 R/H Engine Inlet (Rep w/8130)
Dornier 328 L/H Engine Inlet (Rep w/8130)
(2) Gulfstream GIII L/H, R/H Engine Inlets (Rep w/8130)
==ENGINE NACELLES & THRUST REVERSERS==
King Air Bottom Fwd Engine Nacelle 101-910119-167 (O/H w/8130)
King Air Bottom Fwd Engine Nacelle 101-910119-1 (A/R)
(2) Lear 45 Aft Body 4951101-11, (Rep w/8130)
(3) Falcon 10 L/H Aft Nacelle (Rep w/8130)
Several Falcon 10 Upper/Lower Engine Nacelles
Westwind 1124 R/H Aft Nacelle F10A5B20202-23, -24, -3 (Rep w/8130)
(2) Falcon 20 Cowl Door (A/R)
Falcon 20 Cowl Door (A/R)
(2) Hawker 1000 Lower Cowl Door (Rep w/8130)
(2) Hawker 1000 Upper Cowl Door (Rep w/8130) 266-0210-501
Hawker Aft Cowl Assy, C46B12000
Lear 45 T/R (Inspected w/8130)
Challenger 601 T/R
Westwind T/R Door (A/R)
Gulf Stream GIV Air Stair Door
==CORPORATE AIRCRAFT LANDING GEAR & INV==
(2) Hawker 700 MLG Drag Stay (O/H w/8130)
Hawker 700 L/H MLG (O/H w/8130)
Hawker 700 NG Axle (O/H w/8130)
Hawker 700 MG Plunger (Barrel) Tube
Hawker Struts (O/H)
(6) Hawker MLG, A/R
Hawker NLG, A/R
Lear 45 NG, A/R
Lear 45 MLG Struts, A/R
Westwind 1124 MLG Upper Body (Rep w/8130)
Beech King Air L/G Motor (O/H)
Beech 99 L/G Actuator (O/H w/8130)
(5) Falcon 20 MLG, A/R
Twin Commander/Westwind Barrels, A/R
Twin Commander Fork Assys, A/R
Hawker 700 L/G Material, A/R
Commander MLG Upper Bodies (O/H)
Commander MLG Piston & Axle Assy (O/H)
Commander L/G Barrel (O/H)
Commander L/G Fork Assy (O/H)
Commander Upper Trunions (O/H)
Commander Drag Braces (O/H)
Westwind Nose Fork Assy (O/H)
Commander MG Fork Assy, A/R
Beech Jet Axle & Sockets, Beach Jet 400 MLD Link Assy, (New) Hawker 700 Landing Gear Pins, Hawker 700 Locating Pins, (New) Hawker 700 Landing Gear Aft Trunions, (O/H) Hawker 700 Landing Gear Fwd Trunions, Hawker 700 Main Gear Barrel, (Rep) Hawker 700 Landing Gear, Lower Arm, (Rep) Hawker 700 Main Gear Sleeves, (O/H) Beech Jet 400 MLG Barrels, Beech Jet 400 L/G, Torque Links, King Air Nose Gear Axles, King Air MLG Barrels (New), Lear Jet Axles, Falcon 20 Axles w/8130’s, Falcon 20 L/G Pins, Westwind MLG Pistons w/8130’s, Westwind N/G Barrels, Shafts, Axles, Etc.
==HARDWARE==
MS Hardware=Bushings, Bearings, Cotter Pins, Nuts, Roll Pins, Snap Rings, Retaining Rings, Washers
MS Bolts, Nuts, Washers, Screws
NAS Bolts, Nuts, Screws, Bushings, Bearings
Large Selection of MS, NAS, O-Rings & Gaskets, Seals, New & Current Garlock Seals
NAS Bolts, Pins, Washers
Large Selection of MS, NAS, Solid Rivets
Cherry Rivet Inv
Good Selection of HiLok Inv
Huck Rivets
==NEW LANDING GEAR “O/H” INV==
Bushings, Swivels, Placards, Bearings, Pins, Spacers, Shims, Seals, Sleeves, Springs, Clevis, Clamps, Pinions, Roll Pins, Etc.
King Air MLG Gear Box & Motor Assy
==NEW ELECTRICAL MECHANICAL & HYDRAULICS REPAIR INV==
Resistors, Transistors, Relays, Compasitors, Diodes, Voltage Regulators, Gears, Covers, Switch Plates, Valves, Brushes, Shafts, Levers, End Bells, Springs, Rings, Bearings, Gaskets, Seals, Pins, Connectors, Bodies, Hardware, Rectifiers, Semi Conductors, Shims, Armatures, Transformers, Etc.
O-Rings, Gaskets, Seals, Brushes, Hardware Bushings, Springs, Spacers, Shafts, Bearings, Gears, Pistons, Housings, Shims, Covers, Armatures, Needle Bearings, Piston Rods, Seats, Races, Couplings, Carbon Seals, Rotors, Etc.
==NEW BLOWER REPAIR INV==
Fields, Bearings, Armatures, Brushes, End Bells, Rings, Seals, Spacers, Shims, Bushings, Brush Holders, Housings, Etc.
==KING AIR, HAWKER, WESTWIND, FALCON, COMMANDER, LEAR JET & GULF STREAM ROTABLES==
King Air Main Gear Actuators (O/H w/8130)
King Air Linear Actuators (O/H w/8130)
King Air Trim Cable Actuators (O/H w/8130)
King Air Series MLG Gear Box 115-811020-13
King Air Hyd Valve (O/H w/8130)
King Air Flap Motor & Gear Box Assy (O/H w/8130)
King Air Fuel Shut Off Valves (O/H w/8130)
Beech King Air Blower Assy (O/H)
Beech King Air Flap Actuator (O/H)
Beech King Air Shimmy Damper (O/H, 8130)
Beech King Air L/G Actuators (O/H)
King Air Strobe Light Assys (O/H w/8130)
King Air PC Boards (O/H w/8130)
King Air De-Ice Valves (O/H w/8130)
King Air Park Brake Shut Off Valves (O/H w/8130)
King Air Blower Assys
King Air De-Ice Distributor Valve (O/H w/8130)
King Air Regulators (O/H w/8130)
King Air Fuel Slide Valves (O/H w/8130)
King Air Outflow Valve
Beech Flap Actuators (King Air) O/H
Cessna Citation Flap Gear Box Assy
Hawker 600/700 Hydraulic Valves
De-Ice Distributor Valves
Hawker 600/700 Pressure Valves
Hawker 600/700 Flow Valves
Hawker 600/700 Actuators
Hawker 400 Maxarets
Hawker Heat Blankets
Hawker 700 TKS Panel (O/H)
Hawker 700 TKS Panel
(4) Hawker 1000 Combustion Liners 266-0075-50 w/8130’s
Lear Jet Stabilizer Actuator Motor A/R 6608443-2
Westwind 1124 Outboard Flap Actuators (O/H w/8130)
Westwind Uplock Cylinder
Westwind Accumulators
Westwind Hyd Pumps
Westwind Slide Valves
Westwind L/G Actuators
Westwind Fuel Valves
Westwind Shuttle Valves
Westwind Flap Control Valves
Large Selection of O/H Fuel Boost & Submergible Pumps
Large Selection of Hydraulic Pumps
Lear 25 Heat Liners
Falcon 20 NW Steering Assy
Falcon 20 Switches
Gulf Stream Commander Hydraulic Valves
Gulf Stream Commander Fuel Pumps
Gulf Stream Commander Linear Actuators
Gulf Stream Commander Control Surface Actuators
Gulf Stream Commander Generator Control Units
Gulf Stream Commander Inverters
Allied Signal Fluid Pressure Regulator Valve 898730-3-1
Statapower Hyd Pumps 65WE01031-3
Fuel Boost Pumps 653744-505
Slide Valves (O/H)
De-Ice Pumps (O/H)
Fuel Pumps TC40-2
Fuel Boost Pumps 2060F14, 2070C01, 2070c11
Fuel Flow Transmitters (O/H w/8130)
Bleed Air Valves
Large Selection of Westwind Flap Vanes (O/H w/8130)
Anti-Skid Control Valve & Manifold Assy 354-13BCS
Anti-Ice Valves (O/H)
Carbon Pile Regulators
Woodward Synchronizer Boxes (O/H)
DC Motors (New & O/H)
Speed Sensor Switch 305454-1-1
Generator Control Units (O/H w/8130)
Rotating Beacons (O/H, 8130)
Lear Siegler Generator Control Units (O/H)
Lear Siegler Voltage Regulators (O/H)
Lear Siegler DC Generator Control Unit
Grimes Power Supplies (O/H)
Signal Conditioner 883711-501
Cessna DC Motor 9910055-4
Rotating Beacons
Inverters (O/H) PC-14B, PC-15, PC-17, SPS1307
Turbine Engine Tach Generators (O/H w/8130)
Garret Ice Detectors, Westwind (O/H w/8130)
Oxygen Regulators (O/H w/8130)
Various Oxygen Regulator (O/H)
Various Air Research Air Flow Control Valves, 106884-3-1, 1092TR100-18
Falcon 2000 Wing Leading Edge (Rep w/8130)
Abex Hydraulic Pumps 57083 (O/H)
Janitrol Flow Control Valve 90D88-9A
Commander Maxaret AC61480, AC61482
Beech Jet Top Skin
==DISASSEMBLED ROTABLE CORES & INV==
Statopower Hyd Pumps
Several Fuel Boost Pumps
Hyd Valves
GCU’s
Slide Valves
Axial Vein Blowers
Westwind Steering Valves
Inverter Cores
Lear Seigler Voltage Regulators
Grimes Strobe Power Supplies
Rotating Beacons
Landing Lights
==AS REMOVED & DISASSEMBLED ENGINE INLETS==
Hawker L/H Engine Inlet
Citation 650 Engine Inlet (A/R)(Disassembled)
(2) Falcon 10 R/H Engine Inlet
Falcon 10 L/H Engine Inlet
(2) Gulf Stream GII/III Engine Inlet
==FALCON 10 INVENTORY==
Falcon 10 Inlet Tubes, Cowl Skins
Large Selection O/H Inventory includes Falcon 10 Engine Inlets, Cowls, Aft Bodies
Falcon T/R Doors, 2 Upper
Falcon 10 T/R Doors, 2 Lower
Falcon 10 Cowl Doors F10A5B10204-1
Falcon 10 Tail Pipes
==BENCHES & CABINETS==
(3) Tennsco Benches w/Drawers
2-Door Fireproof Cabinet
Single Door Fireproof Cabinet
==NEW & SERVICEABLE HAWKER HS-125 INVENTORY==
Approximately 5,350 Line Items of Inventory to include Pressure Control Valves, Press Regulators, Hyd. Valves, Press Switches & Check Valves, Inverters, Fans, Power Supplies, Circuit Boards, Nav Lights, Fuel Pumps, Struts, Flap Valves, Links, Arms, Actuators, Rotary Actuators, Rotor Assys., Maxarets, Hyd. Pumps, Shuttle Valves, Accumulators, Ignition Units, Butterfly Valves, Transmitters, Sensors, Engine T-Wheels & Shafts, Impellers, Brackets, Motors, Bushings, Canon Plugs, Connectors, Micro Switches, Spacers, Adapters, Retainers, Housings, Fittings, Inverters, Brushes, Plates, Levers, Modulators, Boards, Switches, Carrier Assys., Bearings, Guides, Tachometers, Cables, Shafts, Torque Tubes, Pulleys, Springs, Panels, Shims, Stiffeners, Ducts, Clevis Rod Ends, Adapters, Pipes, Tubing, Trunions, Transistors, Clips, Rotor Assys, Etc. Several Instruments & Misc. Avionics. For a complete list of this inventory go to www.starmanauctions.com and click on upcoming auctions.
==ALUMINUM & STAINLESS SHEETS & RAW STOCK==
Several Sheets of Aluminum Sizes to include .010 2024T3, .016 7075-T6, .020 2024-T3, .025 2024-T3, .032 2024-T3, .040 7075, .050 2024, .063 2024. Several Sizes of Stainless. Some Inconel, Some Titanium, Aluminum Extrusions & Bar Stock, Etc.
NOTE: Complete Lists for most all of the Inventories are available on our website www.starmanauctions.com then click on UPCOMING AUCTIONS.
Auctioneer’s Note:
The Owners of Jet Service Enterprises, Inc. have closed down some portions of their business. By doing so, they have generated a LARGE selection of surplus Inventory and Equipment. They have therefore contracted with Starman Bros. Auctions to sell all surplus Inventory and Equipment at Public Auction. This Auction includes a LARGE selection of Overhauled, New & A/R Rotables for Several Makes and Models of Corporate Aircraft as well as a Good Selection of New Parts used for Rotable Overhaul and New Hawker Inv. Also Included are some very good pieces of Shop Equipment and Test Equipment. Everything sells “AS IS, WHERE IS” with no warranties implied or expressed. Neither the auctioneer nor owners shall be liable for any incorrect description, fault, or defect. Everything positively sells to the highest bidder. Payment must be made in full day of sale. No property removed until settled for. Auctioneer is not responsible for accidents or stolen property. All counts are approximate. Announcements made day of sale takes precedence over all printed material.