E160
Summary of Christopher Wilder’s SolidEdge CAD files
These files can be found on the V: drive @
MDCad/Inactive Projects/E-160/Chris Wilder October 2002 E160
October 15, 2002
Note: Bolded up text indicates a Folder; individual files follow.
.asm refers to the file extension of SolidEdge assembly model files.
.par refers to the file extension of SolidEdge part model files.
.dft refers to the file extension of SolidEdge draft files.
6 ft. chamber (existing 2 chambers bolted together, 63” ID, one 166” long and one 250” long, located between stations 1250 and 1900, model used w/ Moller septum; CAD files of support structure.)
2 folders; 17 files
5 ft 166 lg tube.par
5 ft 249 lg tube.par
6 ft 166 lg tube assy.asm – assembly model of 166” tube
6 ft 249 lg tube assy.asm – assembly model of 166” tube
6 ft flng.par
outer flng.par
support structure
12 sq flr pl.par
65 horizontal.par
84 vertical.par
angle brace.dft
Asm1.asm
Asm2.asm
Asm3.asm
Asm4.asm – assy model of support structure for tube assy
Z brace.dft
Z brace.par
Moller collimator (existing collimator; 9” long w/ 8” tube & 10” flange; located at station 1260)
1 folder; 11 files
3TO spacer body.par
3TO spacer spool assy.asm – located between stations 858 and 1250
3TO spacer spool assy.dft
8 bellows.par
adapter pl Moller collimator to vac chmbr.par
bellows asy.asm – simulated bellows w/ 10” flanges
Collimator assy.asm – simulated Moller collimator
Flg.par
Moller body.par
spacer body.par
spacer spool assy.asm – (not used i.e. obsolete)
Moller septum (new septum; approximatey 16’ long, located between the Moller collimater and the 6 ft. chamber)
1 folder; 15 files
36 bellows assy.asm - simulated bellows w/ 36” flanges
36 bellows.par
adapter pl vac chmbr to 36 in bellows.par
bellows flg.par
chmbr and flg assy.asm – assy model of vac chamber & adapter flg
chmbr bellows assy.asm - assy model of above two assys
chmbr bellows Cherenkov assy.asm - model of above three assys
chmbr bellows Cherenkov assy.dft
chmbr flg.par
lower septum.par
septum assy.asm – model of top and bottom septum plates
upper septum.par
vac chmbr assy.asm – model of vacuum chamber (4 parts)
vac chmbr wall1.par
vac chmbr wall2.par
Moller spool (fills in the area where the Moller Target was located in E158 in the alcove)
1 folder; 3 files
Moller replacement spool flange.par
Moller replacement spool.par
Moller spool assy.asm - spacer spool for 3TO upbeam of 3WA1 wire array
Ray’s ion chamber (located upbeam from alcove below dump magnets; Reggie Rogers has machined some prototype parts)
6 folder; 39 files
2 bin ion chmbr - prototype chmbr
Al channel 2 bins.dft
Al channel 2 bins.par
Channel lid 2 bins.dft
Channel lid 2 bins.par
Channel lid 2 binsII.par
Ion chamber assembly 2 bins.asm
Ion chamber assembly 2 binsII.asm
Lid with macor 2 bins.asm
Macor 2 bins.dft
Macor 2 bins.par
35 bin ion chmbr
Al channel.par
Channel lid.par
Ion chamber assembly.asm
Lid with macor.asm
Macor. par
plate .par
45 bin ion chmbr
Al channel 45 bins.par
chamber assembly 45 bins.asm
channel lid 45 bins.par
Lid with macor 45 bins.asm
macor 45 bins.par
plate .par
B33 & B34 – models of dump magnets
B33_AND_B34.asm
B33_AND_B34II.asm
Bitmap images – .bmp images of location of ion chmbrs relative to magnets
End view ion chamber assy10.bmp
End view ion chamber assy2.bmp
Ion chamber assy 3.bmp
Iso breakaway.bmp
Side view 2 bin assy.bmp
Side view B33 2nd look.bmp
Side view B33.bmp
Side view B34 2nd look.bmp
Side view B34.bmp
Side view both magnets 2nd look.bmp
Side view both magnets.bmp
Ray’s wire array (located in dump magnets; Reggie Rogers has machined some prototypes)
1 folder; 21 files
wire array.asm – model of complete wire array; ready for detailing
spool assy.asm – model of spool to house wire array
base, anchor block, pin holder, solder pad anchor, wire separator, & wire support .par files
Reference files:
Wing’s cart - 7 folders; 245 files
Bruno’s DC-2A assy - 1 folder; 2 files
Misc. -1 folder; 5 files