APPLICATION FORM316.23/8529.90/03.06CERTAIN MONITORS SEMI KNOCKED DOWN (SKD)
PLEASE NOTE:
- It is imperative to provide the information requested in the attached document titled ITAC’S GUIDELINE FOR ISSUING A REBATE PERMIT TO ASSEMBLERS OF CERTAIN MONITORSbefore completing this application form.
- The rebate item provides for a rebate of the customs duty on goods used in the manufactureof monitors not incorporating television reception apparatus.
If the space provided for on the application form is insufficient, please use the lay-out of the application form as a guideline of the form in which the requested information should be submitted.
1.DETAILS OF APPLICANT
Applicant: ______Importer’s code:______
VAT registration no: ______ /
Postal address: ______
____________
______
Contact details of applicant:
Contact person: ______
Telephone no.: ______
Cell no.: ______
Fax no.: ______
Email address: ______ / Physical address where manufacturing took place: ______
______
______
______
______
Before completing this form it is important that Rebate provision 316.23 as well as ITAC’s guidelines are studied in detail
List of permit Nos. of previous permits (if applicable) applied for in terms of item 316.23:
2.IF THE APPLICANT IS NOT THE MANUFACTURER SUBMIT THE FOLLOWING DETAILS IN RESPECT OF THE MANUFACTURER.
Manufacturer: ______Customs code:______
VAT registration no: ______ /
Postal address: ______
____________
______
Contact details of manufacturer:
Contact person: ______
Telephone no.: ______
Cell no.: ______
Fax no.: ______
Email address: ______ / Physical address of manufacturing
premises:
______
______
______
______
______
______
- Furnish the following information in respect of each of the products imported and in respect of which the rebate is applied for:
(i) DESCRIPTION OF IMPORT PRODUCT/S AS IN THE CUSTOMS TARIFF / a)
b)
c)
(ii) TARIFF SUBHEADING/S OF EACH PRODUCT / a)
b)
c)
(iii) RATE OF CUSTOMS DUTY APPLICABLE TO EACH PRODUCT / a)
b)
c)
(iv) QUANTITY / a)
b)
c)
(v) CUSTOMS
(FOB) VALUE IN
RAND / a)
b)
c)
(vi) COUNTRY/IES IMPORTING FROM / a)
b)
c)
STATE WHETHER THE MANUFACTURING PROCESS INCLUDES THE POPULATION OF BLANK CIRCUIT BOARDS / a)
b)
c)
- Furnish the following information in respect of the final product:
(i) DESCRIPTION AS IN CUSTOMS TARIFF / a)
b)
c)
(ii) TARIFF SUBHEADING/S / a)
b)
c)
(iii) QUANTITY) / a)
b)
c)
(iv) CUSTOMS
(FOB) VALUE IN RAND / a)
b)
c)
(v) COUNTRY/IES OF EXPORT / a)
b)
c)
If the importer is not the manufacturer submit the following information in respect of the products which the importer has supplied or will be supplied to the manufacturer:
(i) DESCRIPTION AS IN CUSTOMS TARIFF / a)b)
c)
(ii) TARIFF SUBHEADING / a)
b)
c)
(iii) QUANTITY / a)
b)
c)
(iv) VALUE RAND / a)
b)
c)
(v) PERIOD DURING WHICH THE PRODUCTS WILL BE SUPPLIED TO MANUFACTURER / a)
b)
c)
8.Indicate with a cross whether the outcome of the application should be forwarded by mail to the applicant or whether it will be collected at the offices of the International Trade Administration Commission at the DTI Campus, Block E, C/o Meintjies street and Esselen street, Sunnyside, Pretoria.
BY MAILBY HAND
9.Indicate at which Customs Office the rebate permit will be used if the application is successful:………………………………………………………
SWORN AFFIDAVIT
Submit the following declaration by the CEO or duly authorized representative of the company:
I, ______(full names) with identity number
______, in my capacity as ______
of ______(hereinafter referred to as the applicant)
hereby declare under oath that the information furnished in this 316.17 application form is to the best of my knowledge true and correct.
NAME: ______DESIGNATION: ______
SIGNATURE: ______DATE: ______
I CERTIFY THAT THE DEPONENT HAS ACKNOWLEDGED THAT HE/SHE KNOWS AND UNDERSTANDS THE CONTENTS OF THIS STATEMENT, AND THAT HE/SHE HAS NO OBJECTION TO TAKING THE PRESCRIBED OATH, AND THAT HE/SHE CONSIDERS THIS OATH TO BE BINDING ON HIS CONSCIENCE. THE STATEMENT WAS SWORN TO/ AFFIRMED TO BEFORE ME AND THAT THE DEPONENTS SIGNATURE WAS PLACED THEREON BEFORE ME.
SIGNED and SWORN to before me at ______this ____ Day of ______Year.
______
COMMISSIONER OF OATH
______
Full names and surname
CHECK LIST
- Please note: Before the 316.23 application form is submitted to ITAC, the applicant is required to complete the check list which is shown in Table 1 below:
Table 1: Check list
Documents and information to be submitted
/ Mark with XImporter’s code
VAT registration no.
Copy of previous permit (if applicable)
All information required in the questionnaire has been submitted.
Signed sworn affidavit
- The checklist will assist applicants to ensure that all the relevant information is submitted and that all the relevant documentation is attached.
It is hereby agreed that the checklist is a true reflection of all the documents that were attached and the information submitted:
Signature: ______
Designation: ______
Date:______
ITAC GUIDELINES FOR ISSUING A REBATE PERMIT TO ASSEMBLERS OF MONITORS NOT INCORPORATING TELEVISION RECEIPTION APPARATUS
A rebate permit will only be considered if all of the following information has been submitted and verified by ITAC upon inspection at the premises.
(a) Amount of capital invested in the operation;
(b) Employment Figures;
(c) A full list of equipment contained in the installation;
(d) The assembly line and the amount of staff per line;
(e) A breakdown of the assembly instruction guide to determine how many stages are needed for the assembly of monitors not incorporating television reception apparatus;
(f) The cost of monitor not incorporating television reception apparatus through the submission of commercial invoices accompanied by cost and price structure;
(h) All computer monitors not incorporating television reception apparatus made in South Africa must have a letter of authority from SABS; and
(i) Submission of the completed attached production stages questionnaire.
STAGESOFPRODUCTIONFORSKDANDCKD(Thesestagesareonlyaguide)
SKD/CKDPermitCriteria# / Item / ComplianceYES/NO
SKDCRITERIA / TomeettheSKDpermitcriteria,thefollowingproductionfacilities(1- 27)mustbepresentandoperationalintheSKDfactory
Thefollowingproductionfacilitiesmustbepresent:
1 / Highvoltagetest
2 / FinalTestingofallfunctions
3 / Finaltestingofallsignalinterfaces
4 / Whitebalancealignmentfacility
5 / Soaktesting(Burnin)facility
6 / Switch-ontestposition
7 / Mainassemblystages
8 / Sub-assemblystages
9 / ProgrammingequipmentforaminimumofHDCPlicence
10 / Faultfinder(s),suitablyqualifiedandtrainedwithminimumofoscilloscopeandsignalsources)
Thefollowingtestequipmentmustbepresent:
11 / ProfessionalHighvoltagetestingequipment(toIEC60065)
12 / FacilityforsoakingLCDtelevisionset
13 / Signalsourcesaslistedbelow:
14 / HFanaloguesignals
15 / Compositevideobasebandsignals
16 / S-Videosignals
17 / Audiosignals(baseband)
18 / Componentvideosignals(YPbPr)
19 / VGAsignalswithappropriateresolutionsforproductsundertest
20 / HDMIsignalswith720and1080lineresolutions
21 / HDMISignalsthatareHDCPprotected
22 / MultichioceHDdecodersignal
23 / Blueraysource
24 / HFSignalstrengthmeters
25 / Oscilloscopes
Thefollowingproductionsupportfacilitiesmustbeavailable:
26 / Qualityassurancefacilityandperson/personnel
27 / Technicalsupporttechnician
CKDCRITERIA / TomeettheCKDpermitcriteria,themanufacturermustdemonstratethathecanassembleasignificantnumberofelectricalcomponentsontoblankPCB's.Therefore,inadditiontotheabove,itisrequiredthatthefollowingproductionfacilities(28-38)mustbeoperationalandlocallyavailabletotheCKDfactory.
Thefollowingequipmentmustbeavailable
28 / Solderpastescreeningmachine
29 / SMDplacementequipment
30 / SMDreflowoven
31 / Handand/orautomaticinsertionfacilities
32 / Wavesolderingmachine
33 / Facilitiesforinspectionandtouch-upofsolderedPCB's
34 / EquipmentforprogrammingassembledPCB's
35 / EquipmentfortestingandaligningassembledPCB's
36 / Unpackqualityassuranceonsamplingbasis
Thefollowingsupportfacilitiesmustbeavailable:
37 / Technicalsupportengineer
38 / Facilityorsystem,eitherinternalorexternal,toensurebasicelectricalmeasuringequipmentiscorrectlycalibrated)
Signallevels
Multimeters
Oscilloscopes
1