MohamedTarek Marouf

Address:-Villa 155 90th Street - 2nd Zone - 6th district - New Cairo

Cairo, Egypt

Mobile No.:- (+20)10.151.8009 / (+91) 9550331491

Email:-

Present Assignment in India:

November 2008 - Present

Senior Drilling Fluid Engineer on HERCULES 258 (Jackup rig), Drilling for ONGC offshore South East Coast India, Drilling HPHT exploratory wells (YS 5 1A,YS 61, YS 71 and YS 8 1) using THERMADRIL Water Base Mud. Mud weight up to 17.6 ppg at a Bottom hole temp. up to 420°f.

Last Assignment in Egypt before Joining India:

Senior Drilling Fluid Engineer on Scarabio 6 deep water semi, drilling for British Gas in the Mediterranean, while working with BG, we drilled Deep Water Exploratory well with Atwood Hunter semi (Water depth 990m), Three wells with K Manhattan Jackup and one HPHT Exploratory well with K Manhattan, while drilling the Exploratory HPHT well (Je 72-1), I was honored a "Thank you letter from both the drilling and HSE side in BG, This Exploratory well (Je 72-1) was the first well in Egypt to be drilled with the Stress Caging Technique which helped drilling the 8.5in hole with a FIT 17ppg also we have achieved another success when applying the same technology principle for a 6 inches hole in the same well. The results were amazing as we got an FIT of 18.92 ppg for the first time in the Mediterranean. The test value was important not only from the higher well bore strength value consideration but it also gave the operator much confidence to drill safer and control kicks with no fear to break the casing shoe during the killing operation – if any, and hence contain any influx properly as the formation pressure reached 17.0 ppg in the upper zone.The operator considered to utilize this technology in the deepwater operation as well as a result of this success.

Work

Experience

Drilling Fluids Engineer (FSR I,II,III & Field Professional I), Baroid Halliburton Company ’05 – Present

  • Attended Technical professional seminar in Houston and was devoted as technical professional at the Gulf of Mexico for deep water operation which was postponed due to Horizon blowout.
  • Working with ONGC India as a Senior Drilling Fluids Engineer on HERCULES 258 jackup rig, Drilling for ONGC in the South East Coast of India, Drilling HPHT exploratory wells (YS 5 1A,YS 61 and YS 71) using THERMADRIL Water Base Mud. Mud weight up to 17.6 ppg at a Bottom hole temp. up to 430°f
  • Worked with BG as a senior mud engineer in exploratory wells, on a semi sub(HUNTER with Atwood Oceanics and SCARABIO 6 with Eni) with a water depth up to 990m and the other exploratory HPHT well (Je 72-1) using stress caging system with a 17.5ppg HYDROGURAD mud in a 6in slim hole and managed to complete the well after series of serious well control situation.
  • Managed and maintained oil-based and water-based fluid systems for various international clients
  • Prepared and Maintained KCl/Polymer, PHPA, CORE-DRIL N, HYDRO-GUARD, BARADRIL N, THERMADRIL, Invert Emulsion systems and heavy brine completion fluids
  • Involved in development and exploration wells both onshore and off-shore
  • Drilled deep vertical and directional wells(up to 49 DGRs) both onshore and off-shore
  • Maintained good communication with my superiors, customers and work-place associates while safe working and behaving.
  • Performing a one man job in severe losses and well killing operations.
  • Createdsixsolution profile with different customers in different areas, wish helped reducing running cost and shorten operation time
  • Had more than one Thank You letter from different customer in both drilling and HSE.
  • Participated in different kinds of safety assurance courses as well as H2S courses
  • Constructed an internet access which acted as a constant communication system between land rigs in the western dessert and the head office therefore increasing the service quality provided to the clients
  • Ranked first in class at the BAROIDMudSchool at Houston with 100% grade
  • Mud school Instructor during time off (2007):- Conducted an orientation mud school course for 11 persons in Egypt so that they get familiar with rigs, SCE and Mud.

Areas of Technical Expertise

  • Most common WBM mud systems and all Baroid specialty WBM systems.
  • Most common OBM and SOBM mud systems and all Baroid Invert Emulsion propriety systems.
  • Drilling Waste management and Solids Control principles i.e. Mud coolers, Cuttings dryers, Thermal units, cutting conveying techniques, Centrifuges, screens, shakers etc
  • Most applicable laboratory testing procedures and testing equipment specifications.
  • BOD (Basis of Design) principles.
  • Preparation of comprehensive Mud and Completion fluid programs.
  • Wellset or StressCage design and application.
  • HPHT drilling fluids experience.
  • Loss Circulation decision making tools and LCM application techniques.
  • Horizontal Drilling and High deviation techniques i.e. hole cleaning and sweep design.
  • Wellbore stability principles and mitigation
  • Reservoir damage limitation through the application of non damaging drilling fluids and principles.
  • Most common heavy and light weight Completion fluids.
  • Fluid Displacement and Cleanup techniques and principles.
  • Inventory Planning and Control.
  • Hydraulics and hole cleaning modelling through DFG+.
  • Drilling Fluids Cost Management.
  • Cementing general principles.
  • Most common corrosion mitigation techniques.
  • Lubricity and ROP improvement techniques

Specific wells worked

OPERATOR

/

DEVIATION

/ LOCATION / DEPTH Ft / DENSITY / B H TEMPERATURE /

MUD TYPE

ONGC / 0 / S East India/ YS 7 1 / 17,400 / 17.6 ppg / 420 / KCL PHPA/ THERMADRIL
ONGC / 0-15 / S East India/ YS 6 1 / 17,400 / 17.6 ppg / 420 / KCL PHPA/ THERMADRIL
ONGC / 0 / S East India/ YS 5 1A / 13, 659 / 17.6 ppg / 380 / KCL PHPA/ THERMADRIL
British Gas / 0-30 / Med. /P1 D2 / 9,500 / 12.0-16.0 ppg / 170 / HYDROGUARD/BARADRILN
British Gas / 0-60 / Med. / P2 A5 / 9,500 / 13.0-15.5ppg / 174 / HYDROGUARD/BARADRILN
British Gas / 0 / Med. /P3 A1 / 7,800 / 13.0 ppg / 160 / HYDROGUARD/BARADRILN
British Gas / 0-30 / Med./Je 72-1 / 14,100 / 17.5 ppg / 300 / HYDROGUARD
British Gas / 0-30 / Med./Sindbad Da / 5,200
WD 950m / 12.5 ppg / 180 / HYDROGUARD/BARADRILN
Apachi / 0 / Western dessert/ Khalda SW / 7,000 / 9.8 ppg / 180 / KCl Polymer
Apachi / 0 / W D/ Qasr 1X / 7,000 / 10ppg / 180 / KCl Polymer
Apachi / 0 / W D/Um Barka / 7,000 / 10ppg / 180 / KCl Polymer
Apachi / 0 / W D/Sherouk 1X / 12,000 / 10ppg / 220 / KCl Polymer
Apachi / 0 / W D/Nader 1X / 12,000 / 10.5ppg / 220 / KCl Polymer
Oil Search / 0-30 / Est Des. / 9,000 / 12.4 ppg / 160 / HYDROGUARD/BARADRIL N
Apachi / 0 / W D/Nader 2,3,….9 / 6,900 / 9.6-10 ppg / 180 / KCl Polymer
Apachi / 0 / W D/Sherouk 2,3..,..9 / 6,900 / 9.8 ppg / 180 / KCl Polymer
Apachi / 0-30 / W D/Rahotep 1x / 14,200 / 10.5 ppg / 300 / KCl Polymer/Lignites
Apachi / 0-30 / W D/Qasr 34 / 13,500 / 10.5 ppg / 300 / KCl Polymer/Lignites
Apachi / 0-30 / W D/Qasr 20 / 14,000 / 10 ppg / 320 / KCL POLYMER/Lignites
Apachi / 0-30 / W D/Qasr 36 / 15,000 / 10ppg / 290 / KCl Polymer/Lignites
Apachi / 0-30 / W D/Nefertum1X / 13,500 / 12 ppg / 320 / KCL POLYMER
Apachi / 0-30 / W D/Zoser 3 X / 12,000 / 11.3ppg / 290 / KCl Polymer/Lignites
Apachi / 0-30 / W D/Huda 1X / 15,000 / 10.5 ppg / 300 / KCl Polymer/Lignites
Apachi / 0-30 / W D/Hekeat 1X / 15,000 / 12 ppg / 320 / KCL POLYMER/OBM
Apachi / 0-30 / W D/Zoser 1 X / 15,000 / 11.3ppg / 290 / KCl Polymer/Lignites
ENI/IEOC / 0-30 / Med./Temsah / 14,000 / 1.84 SG / 270 / INVERMUL / COREDRIL N
ENI/IEOC / 0-30 / Med./Baltim N 1 / 13, 200 / 1.7 SG / 210 / INVERMUL / COREDRIL N

TRAINNINGBEFORE GRADUATION

Trainee Mud Engineer,BAROID (Halliburton),Shokar mud plantEgypt June ’03 – July ‘03

  • Ran a complete mud check everyday
  • Directed the mixing of chemicals at plant
  • Assisted in maintenance of the pumps
  • Had a bird’s eye view of the plant operation

Trainee Field Mud Engineer,BAROID (Halliburton), SinaiEgypt. July ’02– Aug ‘02

  • Worked on rigs: SEIPEM 63 & EDC 1
  • Ran the mud check everyday
  • Shadowed the mud engineer around the rig

Trainee Mud Engineer,BAROID (Halliburton), Cairo office July ’01– Aug ‘01

  • Trained in Baroid Laboratory
  • Worked on Different Mud Preparation and Testing every day

Baroid training/ courses

SEMINARS ATTENDED / COMPLETION DATE / COUNTRY/STATE/CITY /

Grade and Remarks

BasicMudSchool / 2006 / HoustonUSA / 100 %
Wellsight 2000 Software Training / 2006 / HoustonUSA / Pass
Dril N Fluid Technology / 2006 / HoustonUSA / 100
Introduction to DFG Software / 2006 / HoustonUSA / 100
DFG drill ahead hydraulics / 2006 / HoustonUSA / 100
Baroid Surface Solution / 2006 / HoustonUSA / 80
Phase III / 2006 / Egypt / 100
Quality service skills / 2006 / HoustonUSA / 100
Specialty products / 2006 / HoustonUSA / 100
Technical writing / 2006 / HoustonUSA / 100
Competency Assessors / 2006 / HoustonUSA / 100
MMS and IADC Well control / 2006 / HoustonUSA / 94
Completion and Workover Fluids / 2006 / HoustonUSA / 80
A-CPR / 2006 / HoustonUSA / 100
HSE Management System Orientation / 2006 / HoustonUSA / Pass
First Aid / 2006 / HoustonUSA / Pass
Hydrogen Sulphide Halliburton / 2006 / HoustonUSA / Pass
HUET / 2005-07 / HoustonUSA / Pass
BasicSafetyLand and offshore orientation / 2006 / HoustonUSA / 100
Defensive Driving / 2006 / HoustonUSA / 100
Integrated fluid Training II / 2006 / HoustonUSA / 90
Advanced fluid training I / 2006 / HoustonUSA / 100
Hydrogen Sulphide Total Safety license / 2007 / Cairo/ Oil Search Co. / Pass
I Learn Courses
Halliburton Code of Business Conduct Cat#2 / 2007 / Cairo / 100
Ergonomics / 2007 / Cairo / 90
Radiation general awareness / 2006 / Cairo / 85
Environmental awareness and incidents / 2006 / Cairo / 90
Bloodborne pathogens awareness / 2007 / Cairo / 90
5 S / 2009 / India / Pass
Dead tired-fatigue management / 2007 / Cairo / Pass
Hazard Communication / 2007 / Cairo / 90
Explosive awareness / 2006 / Cairo / 88
Substance abuse drug awareness and policy / 2007 / Cairo / 90
BLOCK I
Integrated fluid Training I / 2008 / Cairo / 99
Deep Water / 2008 / Cairo / 100
New Technology Update / 2008 / Cairo / 100
BLOCK II (Technical professional seminar)
Technical professional seminar / Jan. 2010 / HoustonUSA / Pass
Competency Assessment
Deemed Competent for all competencies assigned

EducationBachelor of Science in Chemical Engineering

CairoUniversity, May 2005.

Project Grade: Excellent

International General Certificate of Secondary Education (IGCSE)

High School, Cairo, Egypt; June 1998.

Grade: 98.8%A+

Computer

SkillsSoftware Packages: BAROID-specialized drilling fluids soft wares

(WS 2000, WS EXPRESS, DFG, HIPS, WS ANALAYZER).

MS Office

Operating Platforms: Windows 9X,2000,XP,Vista & Windows 7

LanguagesFluent in English and Arabic,Fair inFrench

Personal

Data Marital Status: Married

Date of Birth: 24.03.1981

References available upon request