Diesel chassis cowl
GENERAL FEATURES
Chassis Length / 5605mm / 6215mm / 7040mm
Chassis Width / 1 996mm / 1 996mm / 1 996mm
Chassis Wheelbase / 3450mm / 3750mm / 4350mm
Front Chassis Overhang for stripped chassis / 800 mm / 800 mm / 800 mm
Front Chassis Overhang for completed chassis / 998 mm / 998 mm / 998 mm
Rear Chassis Overhang / 1 355 mm / 1 665 mm / 1 890 mm
Front Track Width / 1 696mm / 1 696mm / 1 696mm
Rear Track Width / 1 541mm / 1 541mm / 1 541mm
Turning circle / 12460mm / 13400mm / 15280mm
Max. Technical GVW
Total / 5 600 kg / 5 600 kg / 5 600 kg
Front / 1 900 kg / 1 900 kg / 1 900 kg
Rear / 3 700 kg / 3 700 kg / 3 700 kg
125 kW (170 HP)

DAILY Chassis 50 Range / Diesel Chassis Cowl
ENGINE
IVECO F1C EEV
Diesel 4 cylinders in line,
EGR system, double stage turbo
Total displacement 2998 cc
Common Rail High Pressure Direct Injection.
EDC Engine control system
Maximum power 125 kW (170 HP) at 2.990 - 3.500 rpm
Maximum torque 400 Nm at 1.250 ÷ 3.000 rpm
Wastegate valve
  • Water engine heater
  • Comand Cruise Control
  • Blow by pipe
CLUTCH
Hydraulically controlled
Pull type
Diaphragm spring
Dry-single plate
Automatic adjustment
Plate Diameter 11”
GEARBOX
Gearbox ZF 6S 400
1st / 1: 5.373 / 4th / 1: 1.365
2nd / 1: 3.154 / 5th / 1: 1.000
3rd / 1: 2.041 / 6th / 1: 0.791
Reverse / 1: 4.838
Car type pattern shift
Noiseless teeth contact
Aluminium housing
Push-pull cable control
Synchronized RV
RV close to the first gear
Reduced influence of oil viscosity at low temperature
Automatic Gear box with electronic control Agile 6 speed gearbox
ZF 6AS 400
1st / 1: 5.373 / 4th / 1: 1.365
2nd / 1: 3.154 / 5th / 1: 1.000
3rd / 1: 2.041 / 6th / 1: 0.791
Reverse / 1: 4.838
EGS (Electronic control unit)
Possibility to drive in fully automatic or sequential mode
Clutch actuator (Electric controlled clutch operations automatic clutch re-adjustment)
Gear change actuator (Integrated shift and selection sensors)
FRONT AXLE
Type Independent wheels with indication 5819
Steering angle (ext.) 36°
Steering angle (int.) 43°
Maximum Load capacity 1900kg
Double wishbone with torsion bar suspension
Disc Diameter 290 mm
REAR AXLE:
Type Rigid; Identification 450511
Single axle - Twin Wheel
Axle housing material Steel
Maximum load capacity 3700kg
Full-floating single reduction
Brake diameter: 289 mm
  • Differential lock available
/ CHASSIS:
Frame: C-section steel longitudinal side members connected by tubular cross members riveted to long members.
Front body part made of pressed steel panels.Anti-corrosion protection includes cataphoretic dipping in order to reach the boxed sections and strategic use of zinc plated panels in vulnerable areas.
Front Bumper: single piece in plastic material (available only for the completed chassis)
Canvas high level for chassis delivering
SUSPENSION
Front (mechanical)
Double wishbone with torsion bar - Independent front suspension with adjustable torsion bar anchored to the chassis integrated with double-acting telescopic shock absorbers.
Rear (mechanical)
Parabolic double leaf - Parabolic rear suspensions single or multi-leaf with double-acting telescopic shock absorbers.
  • Pneumatic rear suspension.
The system consists of two independent frame level adjusting circuits; one for the left side and the other for the right side of the vehicle.
By operating two fascia controls (vehicle stand still - handbrake on) it is possible to obtain the chassis lowering and the chassis lifting.
BRAKES
Complies with EC standard hydraulically operated with vacuum servo assistance.
Service brake: Full Disk type on front and rear axle.
Emergency brake: integrated in the service brake.
Parking brake: mechanical handbrake, operating on the rear wheels.
Hand brake arm cover in plastic material.
ABS + EBD + ASR + ESP (Electronic Stability Program - contains the Hill Holder
Control system and the Hydraulic Brake Assistant)
  • TELMA Retarder
DRIVE POSITION
Left-hand side driver’s position
  • Right-hand side driver’s position
Gearlever on the Dashboard and controls easy to reach
Electronic Comfort cluster in order to have all the travel information
Steering wheel with secure and ergonomic comfortable grip
Digital tachograph
Cold box (combined with the presence of the driver air conditioning)
2 DIN drawers available on the upper part of the dashboard
Seat Built-in head restraint, with lumbar support, cloth upholstered seatbelt.
Protection bar behind the driver seat
  • Adjustable seat
  • Adjustable and air suspended seat
  • Adjustable, air suspended and heated seat
WHEELS / TYRES:
Disc Wheels 5Jx16”
Tyres 195/75 R16
ELECTRICAL SYSTEM
Voltage V 12
Alternator power V/A 14/110
Battery voltage V 12
Battery capacity Ah 110
Starter motor power kW 1.3
  • Alternator power 140A
  • Alternator power 180A
MISCELLANEOUS:
Electronic tachograph for 2 drivers (EC)
Fuel tank 90 l.
CLIMATISATION
  • Compressor170cc
  • Air conditioning in the driver area
  • Main optional

IVECO FRANCE - Parc Technologique de Lyon - 9, allée Irène Joliot Curie - 69806 Saint-Priest Cedex - - © IRISBUS

The company reserves the right to modify specifications at anytime without prior notice