Press release PM 0110-engl

Page 2 of 2

Relieving tension

Integrating strong, secure strain relief into energy chain mounting brackets is vital for good cable performance in moving applications. Limited space, high pull forces, vibration, temperature extremes, oil and coolant lubricants; are all challenges that need to be met by any strain relief system. Conventional strain-relief products do not always cope well with such conditions. For this reason, Cologne-based company igus has developed "Chainfix" saddle clamps for fixing cables properly within energy chains. Laboratory tests show that their tensile strength is around three times higher than that of standard clamps (3,500 N instead of 1,000 N). The narrow width and low height make the optimum use of limited space when directly mounted in the energy chain mounting bracket (or through a separate C profile rail outside the mounting bracket). Ribbed plastic saddles ensure a positive connection with the cables and thus secure strain relief. The cables remain clamped even under very large pull so that they cannot slip out.

Clear direction of installation

New and optimised accessories are now available for quicker and even more versatile installation of the strain relief clamps. The part number and correct direction of installation can now be found on the top and the side of the "Chainfix" saddle clamps. This makes identification of parts for ordering very easy, whether the clamp is installed or uninstalled.

Locating lug for easy installation

In addition, the double saddles have been optimised with new locating lugs which make installation easier ands more secure, thus saving on installation time. The saddles are made of optimised "igumid G" plastic. Abrasion-free and easy on cables, they work very well with a wide range of sheathing materials (PVC, PUR, TPE etc.). The clamps are available in black varnished steel or in stainless steel, and as a single, double or triple-layer version.

Different cable diameters with multi-clamp

A wide range of strain-relief possibilities can be achieved with the new "Chainfix" multi-clamps. Four different double-saddle geometries are now available allowing the user to install different cable diameters quickly and compactly, inside one single space-saving modular clamp. These multi-row multi-clamps can also fix cables with small outer diameters securely. The double-saddles can be ordered individually to combine existing systems or as ready-to-install "multi" assemblies ex stock or can be freely configured according to customer wishes.

"Chainfix" saddle clamps currently represent standard strain relief for energy chains of all kinds with plastic mounting brackets. In addition, energy chain expert igus offers numerous special solutions. "Chainfix Nuggets" for example, can be used for fixing cables and hoses up to a diameter of 20 mm. This extremely space-saving and low-cost strain relief element slides easily and quickly into the C-profile rail with no tools needed. Strain-relief separators are a further special solution. These combine energy chain interior division components with strain relief and are particularly suitable for energy tubes.

www.igus.eu/chainfix

Photo PM0110-01: igus GmbH, Cologne

Cables are fixed safely in the energy chain using the "Chainfix" saddle clamps from igus, Cologne. Laboratory tests show they are three times more resistant to pull forces than standard clamps. New accessories are now available for even more versatile and faster installation of strain relief.

Photo PM0110-02: igus GmbH, Cologne

Straightforward installation, simple spare part ordering: The part number and correct direction of installation are marked on the top and side of the saddle clamp.

Picture PM0110-03: igus GmbH, Cologne

Multi-row multi-clamps with different saddle geometries: Different cable diameters can be installed together in one compact clamp.

CONTACT:
igus® GmbH
Spicher Str. 1a
D-51147 Köln
Phone +49-22 03 / 96 49-0
Fax +49-22 03 / 96 49-222

www.igus.de / The terms “igus, Chainflex, ReadyCable, Easy Chain, E-Chain, E-Chain System, Energy Chain, Energy Chain System, Flizz, ReadyChain, Triflex, TwisterChain, invis, DryLin, iglidur, igubal, xiros, plastics for longer life and manus“ are legally protected trademarks in the Federal Republic of Germany and, where applicable, in some foreign countries.

PRESS CONTACT:

André Kluth

Head of Corporate Communication

igus GmbH

Spicher Str. 1a

D-51147 Köln

Tel. +49 (0) 22 03 / 96 49 - 611

Fax +49 (0) 22 03 / 96 49 - 631

www.igus.de

DIN ISO 9001:2000