CC2500MEDIUMWALK BEHIND SAW
14”-26”
SELF PROPELLED
Delivers the Power of a
Large Saw with a Compact Size
Features/Benefits:
· Screw feed raise/lower with optional power raise/lower
· Positive gear drive to rear axle via Eaton hydrostatic transmission
· 2 position tilt handle bars
· Rigid high strength 3/16” steel box frame with heavy bar reinforcement
· Hydraulic raise/lower offered on all models
· Maximum cutting depth of 10-3/8”
with 26” model
CC2500WALK BEHIND SAWS
Horsepoweras rated by the engine manufacturer
Bladenot included
Parts List #1800418
Model#Engine/Motor TypePart #Cat #Blade
Capacity
Uncrated/Crated
Weight (lbs.)
CC2515E-1415 HP Leeson Electric 230V5800400A4841314”700/770
CC2515E-1415 HP Leeson Electric 460V5800400B9998014”700770
CC2515E-1415 HP Leeson Electric 575V5800400C2794814”700/770
CC2515E-2015 HP Leeson Electric 230V5800401A9800120”710780
CC2515E-2015 HP Leeson Electric 460V5800401B9369420”710/780
CC2515E-2015 HP Leeson Electric 575V5800401C2795120”710/780
CC2515E-2615 HP Leeson Electric 230V5800402A9347926”720/790
CC2515E-2615 HP Leeson Electric 460V5800402B9440926”720/790
CC2515E-2615 HP Leeson Electric 575V5800402C4579526”720/790
CC2520H-1418 HP Honda GX620 **58004064841814”600/670
CC2520H-2018 HP Honda GX620 **58004074716420”610/680
CC2520H-2618 HP Honda GX620 **58004084841926”620/690
CC2524H-1420.5 HP Honda GX670 **58004924842314”590/660
CC2524H-2020.5 HP Honda GX670 **58004934842420”600670
CC2524H-2620.5 HP Honda GX670 **58004944842526”610/680
CC2525HY-1425 HP Hydraulic 25GPM @ 2500 PSI58004894842614”610680
CC2525HY-2025 HP Hydraulic 25GPM @ 2500 PSI58004904842720”610/680
CC2525HY-2625 HP Hydraulic 25GPM @ 2500 PSI58004914842826”610680
CC2527KC-1427 HP Kohler Command **58005977903614”590/670
CC2527KC-2027 HP Kohler Command **58005987903720”610680
CC2527KC-2627 HP Kohler Command ** +58005997881626”620/690
50cycle motors available on request. (motor starter switch box included).
**Includes remote cyclone air cleaner.
+26” blade guard cannot be used on left side of saw.
78
25HP Hydraulic
Powered
CC2500 Control Panel Shown with Optional Raise/
Lower Control Lever
CC2500Specifications:
Maximumdepth of cut with 14” blade: 4-5/8”
Maximumdepth of cut with 20” blade: 7-3/8” Maximum depth of cut with 26” blade: 10-3/8” Blade shaft RPM:Varies Blade shaft diameter: 1-1/2”
Arborsize:1” w/drivepin Blade shaft drive:4 belt thru 25HP, 5 belt for 27HP Blade mounting: Right or Left Transmission (self propelled only): Eaton Model 6
DriveSpeed:0-130 feet/min Fuel Capacity (gas models)5 gallons INCLUDES:
ElectricStart (18-23 HP models)Low Oil Alert Tach/Hour Meter (18-23 HP models)Frame Lift Quick Disconnect Blade Flanges
CuttingDepth Indicator
+Propane conversion kits include the following: conversion to dual fuel, safety fuel lock, liquid propane fuel tanks with float gauge and safety check connector.
wNotavailable on electric saw models (CC2515E) or hydraulic saw models
(CC2525HY)without Power Raise/Lower Assembly.* Includes battery and alternator.
CC2500 Dimensions:
A. Saw Height47-1/2” B. Minimum Length, Pointer Up
Handlein Lower Position47-1/2” C. Maximum Length, Pointer
Down,Handle in Upper Position107-1/2” D. Handle Extension 24”
E. Frame Width20” F. Frame Length 38”
G. Saw Width26-1/2” H. Front Axle Center Length 15-1/2” I. Rear Axle Center Length 17-3/4” J. Wheel Base Length 20”
FrontWheel Dimensions6” x 2” x 1” Rear Wheel Dimensions 8” x 2” x 1” Crated Saw Dimensions 52” L x 34” W
x55” H
79