SPECIFICATION SHEET
MACHINE: -Used Mazak Quick Turn Nexus 250 II MSY
Stock No: -8342
PRICE: - £119,950.00 + VAT
Serial No: -258924
Control: -Mazatrol Matrix Nexus 2 Control
Date of Manufacture: -2015
SPECIFICATION
Capacity
Chuck size250mm
Maximum swingɸ675mm
Standard machining diameterɸ276mm
Maximum machining diameterɸ380mm
Bar work capabilityɸ77mm
Distance between chuck jaws of both spindles-39 – 546mm
Maximum support weight [chuck weight included]Main spindle: 400kg
Sec. spindle: 150kg
Main Spindle
Spindle speed35 – 4000 minˉ¹
Spindle noseJIS A2-8”
Acceleration & deceleration time2.3 sec
Boreɸ88mm
Motor output [half hourly rating]26kW
Maximum torque465 N·m
Secondary Spindle
Chuck size165mm
Spindle speed35-6000 minˉ¹
Spindle noseJIS A2-5
Acceleration & deceleration time2.2 sec
Motor output [25% ED]11kW
Maximum torque [15% ED]90 N·m
Turret
Number of tools (milling tools) 12 Pieces
Tool sizeOutside turning□25mm
Inside turningɸ40mm
Milling drillɸ20mm
Milling tapM20 x 2.5mm
End millɸ20mm
Indexing timeNext/opposite position0.2/0.6 sec
Milling spindle speed25-4500 minˉ¹ (optional: 6000)
Milling motor output [10-min. rating]5.5kW
Maximum torque of the milling spindle35 N·m
Feed Axes
Rapid traverseX/Y/Z/W30/21/33/30m/min
Rapid traverseC555minˉ¹
Rapid traverse time constant X/Y/Z/W85/85/90/65msec
Rapid traverse time constant C195ms (main SP)/125ms (sec. SP)
TravelX230 [225+5]mm
Y100 [50+50]mm
Z575 [420 + 155]mm
W585 [580 + 5]mm
Others
Coolant tank capacity190l
Power requirement41.6/47.4kVA
Air pressure0.5MPa
Total air capacity150L/min (ANR)
Overall Dimensions
Centre height1020mm
Overall length (inc. barfeed & unloader)8000mm
Overall width2150mm
Overall height1856.7mm
Machine weight5600kg
Power on1399 hours
Total cut258 hours
Complete with:-
Multifeed MSV 80 short mag bar feed and bar support
Multifeed Xtract parts unloader
Kitagawa BB210 & B206 chucks
2 driven holders
3 drill/boring holders
5 turning toolholders
1 parting off toolholder
Twin parts catcher with conveyor
Tool setter
8 Bar coolant (prep for 70 bar)
Prep for swarf management
Control Options: EIA, Spiral, EIA 3D Comp, Rotation, Geometric, Scaling, Ext-Data I/O, Thread, Sub C Axis Control, Inverse Time, Auto Turn, Polar Coords Input, Comparison Stop, G54.1, Sync Mill Tapping, Variable 600 Sets, Cylinder, EIA Helical Tap Cycle, EIA Pattern Cycle, 2nd Aux Fns, Tilted Working Plane, Pitch Error Comp
Payment terms:- In full prior to collection or delivery
Availability:- Ex-stock subject to prior sale
Terms of trading:- Please refer to our standard terms and conditions of trading attached.
This machine can be seen under power at our premises in Burgess Hill. Every effort has been made to ensure the above specification is accurate, however we advise you to check critical criteria.