Working Group Meetings
Location: Hyatt Regency Crown Center, 2345 McGee Street, Kansas City, MO
Date: 16 – 17 October 2006
Monday, 16 October
08:00 – 10:00 / P1665 IEEE Guide for the Rewind of Synchronous Generators, 50 and 60 Hz, Rated 1 MVA and Above
Chair: William Bartley, Hartford Steam Boiler
10:00 – 12:00 / P56-1977 IEEE Guide for Insulation Maintenance of Large Alternating-Current Rotating Machinery (10,000 kVA and Larger)
Chair: Doug Conley, Siemens
13:00 – 15:00 / Testing and Evaluation of Stator Cores
Chair: Glenn Mottershead, Voith Siemens Hydro
15:00 – 16:00 / P43-2000 IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery
Chair: Andrew Brown, Iris Power Engineering
16:00 – 17:00 / P95-2002 IEEE Recommended Practice for Insulation Testing of Large AC Rotating Machinery with Direct Voltage
Chair: William McDermid, Manitoba Hydro
17:00 – 18:00 / P117 IEEE Standard Test Procedure for Evaluation of Systems for Insulating Materials for Random-Wound AC Electrical Machinery
Chair: Nancy Frost, Von Roll Isola USA
Tuesday, 17 October
08:00 – 10:00 / P304-1977 IEEE Test Procedure for Evaluation and Classification of Insulation Systems for Direct-Current Machines
Chair: Bal Gupta, AOK Technologies
10:00 – 11:00 / P275-1992 IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for Alternating-Current Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 6,900 V and Below
Chair: Charles Wilson, Insulation Integrity
11: 00 – 12:00 / P429-1994 IEEE Recommended Practice for Thermal Evaluation of Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 6,900V and Below
Chair: Charles Wilson, Insulation Integrity
13:00 – 14:00 / P1310-1996 IEEE Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Generators
Chair: Greg Stone, Iris Power Engineering, Inc.
14:00 – 15:00 / P1553-2002 IEEE Test and Acceptance Criteria for Voltage-Endurance Testing of Form-Wound Coils and Bars used in Hydroelectric Generators and Large Pumped Storage Motors
Chair: Greg Stone, Iris Power Engineering, Inc.
15:00 – 17:00 / Materials Subcommittee
Chair: Gary Heuston, Doble Engineering

1