ZSANYCAM
4k
2880*2160
Cautions
Before use machine，please read below attentions carefully：
1.Please Operate according to manual ,incorrect operation will cause camera damaged.
2.Please do not fall or impact camera,otherwise camera will getdamaged
3.Please do not expose camera into wet or dusty environment，otherwise battery will leakage and causefire
4.Wesuggestusecameraintheenvironmentduring10℃~70℃ togetthemaximum
power of battery
5.Ensurecamerabeingoffwhenmemorycardneedinsertionandextraction，to protect card or storage datadamage
6.Temperature will rise after camera use for a time，it is normalphenomenon
7.Pleasedonottouchthelens,tomakecameraworkwell
8.Pleaseusespecialglassesclothtocleanthefingerprintsordustonthelens
Operation manual
Appearance introduction
Mic SD USB
HD OUT
UP
DownSpeaker
WIFI LED light
OK key
Working indicator led light
Charging indicator led light
Rear LCD Dispaly
Key function introduction
Power button: Used to turn on or off; Press this button to capture a picture while recording; switch camera mode, playback mode, menu mode conversion when camera standby.
2.OK button: used for recording, stop recording and taking pictures; for playback video and stop the video; in the system settings for entry / confirmation menuoption
3.Up key ▲: Press and hold to zoom in the image during camera standby or video recording. Select the function and turn-up option in the menu setting. In the playback mode, it is used for fast backward playback; short press to enter WIFI mode in standby mode.
4.Down key ▼: Press and hold to decrease the image during standby or recording;short press to turn off the microphone in standby mode; to fast forward in playback mode; and select function and scroll down in menusetting.
Battery charge
Plug the charger into the USB port of the camera and plug the charger into the mains power.Theredlightisonandthebatteryicononthedisplaybeeps.Whenthebattery is fully charged, the red light turnsoff.
Tips:
1.Inordertoimprovethechargingefficiency,pleasechargeintheshutdownstate
2.Make sure that the chargeris plugged into an electrical outlet
Boot the camera
LCD screen display camera, exposure compensation, recording icon, recording time, resolution, memory symbols, the LCD screen displays the screen, and then press the power button for 3 seconds, the machine prompts and the work of long light, LCD display boot screen after boot (default for the cycle video state) Battery symbol, watermark time, battery icon.
Turn off the camcorder
When camera power on, long press the power button for 3 seconds, camera will turn off when heard a shutdown sound and shut down LOGO appears.
Video recording
Loop recording
1.If the cycle recording is turned on, set the cycle recording for 3 minutes, press the OK button to start recording, machine will automatically save 3 minutes video, after that, machine will continue to record the video, but the video recording display on the screen will show it starts with 0,
2.When TF card memory of the camera full, the machine will automatically delete the memory card and other videoclips.
Normal recording
When you close the cycle recording, press OK button is normal recording, the normal recording video is only one file, when the card memory is full, camera will automatically stop recording.
Motion detection
When "Rec Video" is set to "Off" and "Motion Detection" is selected, it will automatically record when the camera detects the movement of the object and automatically stop recording after 10 seconds when no object is moving. .
Tips: circular video, time recording, motion detection three functions can not open at the same time.
Capture
Press the power button during recording mode to capture an image .
Note: In the capture mode , the video will still continues, only in browse mode you can view the captured images.
Take pictures
Normal shooting
In standby mode, press the power button to switch to the camera mode, LCD display camera icon, exposure compensation, white balance, ISO, the right to display the numberofphotoscanbeshot,pixels,imagequality,cardsymbols,batterysymbols.Click OKbuttontotakepictures,andwillautomaticallysave.
Continuous shooting function
Select "Continuous" and confirm the exit, continuous shooting off, you can return to normal camera.
This function, click the OK button, the machine takes a picture,
click OK again, the machine will begin to take pictures, until again click OK button, the machine to stop taking pictures.
Zoom
In the camera, video mode, long press ▲ and ▼ keys to zoom in and out of the image.
Playback mode
In playback mode, press ▲ and ▼ to select video or photo into preview, press OK button
to play the select video clips; press OK button during playback to stop playing. Press the
▼ button to fast forward, press the ▲ key to fast rewind, press the OK button to stop.
Screen signal introduction
/ WIFI ON/ VIDEO RECORDING
/ LOOP RECORDING
/ FULL POWER BATTERY
/ SHOOTING TIME AND SPARE MEMORY
/ TF CARD
/ SHOOTING
/ TIMING
/ CONTINUOUS SHOOTING
Menu Function
Resolution / UHD P24/QHD P30/FHD P60/FHD P30/HD P60/HD P30/WVGA P30/VGA P240/VGA P30/QVGA P30Loop recording / OFF/3Minutes/5Minutes/10Minutes
Gyroscope / OFF/ON
WDR / OFF/ON
Time-lapse Record / OFF/100ms/200ms/500ms/1Sec/5Seconds
Motion Detection / OFF/ON
Record Audio / OFF/ON
Date Stamp / OFF/ON
Angle / 170°/140°/110°/70°
Diving mode / OFF/ON
Night Scene / OFF/ON
Self Timer / Single/2S Timer/5S Timer/10S Timer
Image Size / 20M 5120*3840/16M 4608*3456/12M 4032*3024/10M
3648*2736/8M 3264*2448/5M 2592*1944/3M
2048*1536/VGA640*480
Burst / OFF/Burst 3/Burst 5/Burst 10
Quality / Fine/Normal/Economy
Sharpness / High/Normal/Medium
White Balance / Auto/Daylight/Cloudy/Tungsten/Fluorescent
Color / Color/Black&White
ISO / Auto/100/200/400
Exposur Value / +2.0/+1.7/+1.3/+1.0/+0.7/+0.3/0/-0.3/-0.7/-1.0/-1.3/-1.7/-2.0
Anti-Shaking / OFF/ON
Delete / Delete Current/Delete All
Protect / Lock Current/Unlock Current/Lock All/Unlock All
WIFI / OFF/ON
WIFI SSID / Action Cam
WIFI Pass Word / 12345678
Date/Time / 200/01/01 08:33:57 YY/MM/DD
Auto Power OFF / OFF/1Minutes/3Minutes/5Minutes/10Minutes
Beep Sound / OFF/ON
Voice Prompt / OFF/ON
OSD / OFF/ON
CAR ACC / OFF/ON
Language / ------
TV Mode / NTSC/PAL
TV / OFF/ON
Screen Save / OFF/30 Sec/1Minute/3Minute
Frequency / 50HZ/60HZ
Format / SD Caed
Default Setting / Cancel/OK
Version / Model:Action Cam/Version:20160919V2.0
WIFI
The product can be connected with Android/IOS mobile devices through wifi. Steps as below:
1.InstalltheAPP“ZSANYCAM”APPon the mobiledevices;
a.aFor Android, search the APP“ZSANYCAM” ，in Android market, 360 Mobile Assistant or Google to get itinstalled
b.For IOS, search“ZSANYCAM”in App store to get it installed.
2.Afterpoweronthecamera,longpressUpkeytoopenwifi.ThentheLCDshowsthe wifi name and password12345678
3.Findthewifionthemobiledevices,enterthepasswordtoconnect;
4.Afterwificonnecting,opentheAPPZSANYCAMAPK onthemobiledevice, 5.ressbuttontochangemodebetweenVideoandPhoto
6.Press button to view videos andphotos;
7.Inmodeofplayback,longpressthefiletitletodownload.Afterfinishingdownload,
press button to check. 5、ProductParameters
iOS APP Download for Wi-Fi Edition
Android APP Download for Wi-Fi Edition
Resolution / UHD24PFS QHD30FPS FHD60FPS FHD30FPS HD60FPS HD30FPS WVGA30FPS VGA240FPS VGA30FPS QVGA30FPSImage Size / 20M/16M/12M/10M/8M/ 5M/3M/VGA
Lens / 170°hd wide view angle
ISO / Auto
White Balance / Auto
LCD / 2.0 inch TFT LCD
Image format / JPEG
Video format / MP4
Video compressed format / H.264
Connector / Micro USB2.0, HD OUT
Power / 5V/1A
Power Consumption / About 5V/600MA
Battery capacity / 900MAH
Recording time / 1080P/About 60
Charging time / About 2 hours
OS / Windows XP/7/8 SP3/Vista and Mac 10.5 or above
Storage temperature / -10℃～+55℃
Working temperature / -20℃～+70℃
Humidity / 5% ～ 95%（no frost）
Waterproof / Underwater 30M with waterproof case
Normal waterproof / Waterproof rate of camera body IPX5
Dustproof / About IEC IP6X
TF card / UP to 32G，hot plug available