A/E Name / Issue Description
A/E Project No. / Month, 00, 0000
SECTION 25 11 19 – bas operator interfaces - retrofit
PART 1 - GENERAL
1.01 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General Conditions and Division01 Specification Sections, apply to this Section.
B. Specifications throughout all Divisions of the Project Manual are directly applicable to this Section, and this Section is directly applicable to them.
C. Refer to Section 25 00 10 for general requirements.
1.02 SUMMARY
A. Section includes:
1. Operator Workstations.
2. Portable Operator Terminal / Remote Workstation.
3. Printers.
B. Furnish and install all Operator Interfaces and Control System Servers as required for the BAS functions specified. All computers shall be warranted by the manufacturer for a period of one year after final acceptance.
1.03 REFERENCE STANDARDS
A. The latest published edition of a reference shall be applicable to this Project unless identified by a specific edition date.
B. All reference amendments adopted prior to the effective date of this Contract shall be applicable to this Project.
C. All materials, installation and workmanship shall comply with the applicable requirements and standards addressed within all references.
PART 2 - PRODUCTS
2.01 GENERAL
A. All materials shall meet or exceed all applicable referenced standards, federal, state and local requirements, and conform to codes and ordinances of authorities having jurisdiction.
B. The make and model of personal computers (PC), notebook PC’s, monitors, and printers shall comply with Owner’s current standards for desktop personal computers as of the date of Substantial Completion. Contact Owner for the current computer hardware standards.
C. Operating system for operator workstation shall comply with Owner’s current standards for desktop personal computers as of the date of Substantial Completion. Contact Owner for the current computer hardware standards.
2.02 OPERATOR WORKSTATION (OWS)
A. Provide a PC that meets or exceeds the minimum requirements of the BAS software and meets or exceeds the minimum requirements of MD ANDERSON. PC shall contain a CD-RW/DVD ROM Combo Drive to meet Owner’s current standards.
B. Provide 19 inch (17.9 inch viewable, 0.25-0.25AG) monitor.
C. Provide detachable keyboard with standard typewriter layout, function keys, and separate numeric keypad. Provide a USB mouse and mouse pad with the system. Provide one open serial port after configuration of the workstation to meet the requirements of the rest of these Specifications.
D. Workstation PC shall have the capability of changing serial port interrupt vectors and IOBASE addresses through software.
E. Provide software, graphics and programming as specified in Section 25 15 10.
F. Provide network card approved by BAS manufacturer to support Supervisory LAN communications (100 Mbps Ethernet TCP/IP) for OWSs connected to the Local Supervisory LAN and network card or LANID where connected to the Primary Controller LAN.
G. Provide additional hardware, video drivers, serial port, etc., to facilitate all control functions and software requirements specified for the BAS.
H. Operator Workstations shall be placed as indicated on the Drawings or as directed by Owner.
2.03 PORTABLE OPERATOR TERMINAL (POT) / REMOTE WORKSTATION
A. Portable Operator Terminal shall support system management by connection to the controllers, by connection via the Internet, and by dial-up communications while serving as the remote workstation.
B. Provide one notebook personal computer (PC) that meets or exceeds the minimum requirements of the BAS software and that meets or exceeds the minimum requirements of MD ANDERSON. Notebook PC shall contain a 24X/24X/24X/8X CD-RW/DVD ROM Combo Drive.
C. Provide a 10/100 LAN+56K CardBus Type III PC Card if internal adapter is not present.
D. Provide minimum 14.1 inch XGA active matrix display.
E. Provide carrying case and extra battery.
F. Operating system for operator workstation shall meet or exceed the minimum requirements of the BAS software and shall meet or exceed the minimum requirements of MD ANDERSON.
G. Provide software, graphics and programming as specified in Section 25 15 10.
H. Provide additional hardware, video drivers, serial ports, etc., to facilitate all control functions and software requirements specified for the building automation system.
I. Provide all controller configuration and interface software and/or plug ins for all devices applicable. All shall be loaded and functional. Provide all required interface cables required to connect to all networks, routers, controllers, SDs etc.
J. Wherever a POT connection point is not accessible in the same room as the device controlled, Contractor shall provide a wireless system, to permit configuration, testing and operation.
K. Include licensing for all software packages.
1. BAS licensing for this POT shall allow unlimited access to all aspects of the any manufacturer’s system including system access, workstations, points, programming, database management, graphics etc.
2. No restrictions shall be placed on the license.
3. All operator interface, programming environment, networking, database management and any other software used by the Contractor to install the system or needed to operate the system to its full capabilities shall be licensed and provided to the Owner.
2.04 PRINTER
A. Provide a 600x600 dpi, minimum four (4) sheets per minute color laser printer with 8-1/2 inch x 11 inch and 11 inch x 17 inch paper trays at each new operator workstation (OWS) that meets or exceeds the minimum printer requirements of the institution.
PART 3 - EXECUTION
3.01 INSTALLATION
A. Installation shall meet or exceed all applicable federal, state and local requirements, referenced standards and conform to codes and ordinances of authorities having jurisdiction.
B. All installation shall be in accordance with manufacturer’s published recommendations.
C. Set up workstations and printers as indicated on the Drawings. Install all software and verify that the systems are fully operational. Ensure licensing is provided for all software.
D. No license, software component, key, etc or any piece of information required for installing, configuring, operating, diagnosing and maintaining the system shall be withheld from the Owner.
E. Install electronic control system Operation and Maintenance Manuals, programming guides, network configuration tools, and control Shop Drawings etc. on each OWS. Provide interface or shortcuts to guide user to the appropriate information.
F. Set up portable operator terminal and configure it as the remote workstation. Install all software and verify that the system is fully operational.
END OF SECTION 25 11 19
The University of Texas / bas operator interfaces - retrofitMD Anderson Cancer Center / 25 11 19
MS070711 / 2 of 4