TITLE OF PROJECT - PROJECT #
TITLE OF PROJECT
DOCUMENT 00 91 13
ADDENDUM #_
[INSERT PROJECT TITLE]
[INSERT PROJECT #]
BID DATE: [INSERT BID DATE], 2:00 P.M. CENTRAL TIME
The information contained in this Addendum modifies, supplements or replaces information contained in the Project Manual and on the Drawings and is hereby made a part of the Contract Documents.
Acknowledge receipt of this Addendum by placing the appropriate addendum number in the blank on the Bid Form.
ADDENDUM INDEX
APPLICABLE TO THE PROJECT MANUAL: Item #1 through Item #__ inclusive.
APPLICABLE TO THE DRAWINGS:Item # _ through Item # inclusive.
ATTACHMENT(S):List of Plan Holders
SEALS & SIGNATURES
I hereby certify that the portion of this technical submission described below was prepared by me or under my direct supervision and responsible charge. I am a duly Registered Architectunder the laws of the State of Iowa.
[INSERT NAME]
______
SignatureDate
Registration expires ______Iowa Reg No. [Insert]
Pages or sheets covered by this seal:
Divisions
Sections
I hereby certify that the portion of this technical submission described below was prepared by me or under my direct supervision and responsible charge. I am a dulyLicensed Professional Engineer under the laws of the State of Iowa.
[INSERT NAME]
______
SignatureDate
Discipline: Mechanical Engineer, Iowa License No. [Insert]
License expires ______
Pages or sheets covered by this seal:
Division
Sections
I hereby certify that the portion of this technical submission described below was prepared by me or under my direct supervision and responsible charge. I am a dulyLicensed Professional Engineer under the laws of the State of Iowa.
[INSERT NAME]
______
SignatureDate
Discipline: Electrical Engineer, Iowa License No. [Insert]
License expires ______
Pages or sheets covered by this seal:
Division
Sections
I hereby certify that the portion of this technical submission described below was prepared by me or under my direct supervision and responsible charge. I am a duly Licensed Professional Engineer under the laws of the State of Iowa.
[INSERT NAME]
______
SignatureDate
Discipline: Structural Engineer, Iowa License No. [Insert]
License expires ______
Pages or sheets covered by this seal:
Division
Sections
I hereby certify that the portion of this technical submission described below was prepared by me or under my direct supervision and responsible charge. I am a duly Licensed Professional Engineer under the laws of the State of Iowa.
[INSERT NAME]
______
SignatureDate
Discipline: Structural Engineer, Iowa License No. [Insert]
License expires ______
Pages or sheets covered by this seal:
Division
Sections
I hereby certify that the portion of this technical submission described below was prepared by me or under my direct supervision and responsible charge. I am a duly Licensed Professional Engineer under the laws of the State of Iowa.
[INSERT NAME]
______
SignatureDate
Discipline: Civil Engineer, Iowa License No. [Insert]
License expires ______
Pages or sheets covered by this seal:
Division
Sections
END OF SECTION
APPLICABLE TO THE PROJECT MANUAL:
ITEM #1SECTION
A.Refer to
APPLICABLE TO THE DRAWINGS:
ITEM #2SHEET #
A.Refer to
END OF ADDENDUM
PLANNING, DESIGN &ADDENDUM #_
CONSTRUCTION00 91 13-1
APRIL 2007 EDITION