A & E Specification – VPC-DNHDA Box Camera
1. Description - The unit shall be a high performance true day/night CMOS based, triple format 1080p (TVI & AHD) / 1000TVL (CVBS) box camera with mechanical IR cut filter. The unit shall meet or exceed the following design and performance specifications
2. General
VPC-DNHDA A&E Spec – Mar 2017
Page 2 of 3
A & E Specification – VPC-DNHDA Box Camera
2.1. Sensor: 1/2.9” Sony CMOS
2.2. Pixels: 1920 (H) x 1080 (V)
2.3. Operation: True Day / Night
2.4. Resolution: 1080p (TVI & AHD) / 1000TVL (CVBS) colour and monochrome
2.5. Mount: C, CS (via back focus ring)
2.6. Sensitivity: 1.0Lux (colour), 0.1Lux (mono) @ F1.4
2.7. Electronic Shutter: Auto or Manual - 1/25 – 1/50,000
2.8. Signal to Noise Ratio: 50dB (AGC off)
2.9. Scanning Frequency: PAL: 15.625KHz (H) x 50Hz (V)
2.10. Synchronisation: Internal
2.11. Camera Control Functions: OSD via tact switch on rear of camera (in TVI & AHD, also via compatible control equipment with coax telemetry)
2.12. Lens: DC, Manual
2.13. Shutter: Auto, 1/50, FLK, 1/200, 1/400, 1/1000, 1/2000, 1/5000, 1/10000, 1/50000, x2, x4, x6, x8, x10, 15, x20, x25, x30
2.14. AGC: 1 – 15
2.15. Sens-up: x2, x4, x6, x8, x10, 15, x20, x25, x30
2.16. Brightness: 0 – 100
2.17. DWDR: Off, On (1 – 8)
2.18. Defog: Off, Auto
2.19. Backlight: BLC (1 area), HSBLC (4 areas)
2.20. White Balance: AWB, ATW, AWC->SET, Indoor, Outdoor, Manual
2.21. Day and Night: Auto, Colour, B&W
2.22. Sharpness: Off, Auto (1 – 10)
2.23. LSC: Off, On
2.24. Freeze: Off, On
2.25. Mirror: Off, On
2.26. Negative Image: Off, On
2.27. 2DNR: Off, Low, Middle, High
2.28. 3DNR: Off, Low, Middle, High
2.29. Motion: Off, On (4 areas)
2.30. Privacy: Off, On (4 areas – Mosaic, Inversion, Colour)
2.31. Defect Detection (Dead Pixel Correction): Live DPC, White DPC, Black DPC
2.32. Camera Title: 15 alpha-numeric characters
2.33. Monitor: LCD, CRT
2.34. Video Out: PAL, NTSC
2.35. Language: ENG, CHN1, CHN2, GER, FRA, ITA, SPA, POL, RUS, POR, NED, TUR, KOR, JPN, HEB, ARB
2.36. Exit: Reset (full factory reset), Save & End (save and exit OSD menu), Not Save (exit OSD without saving changes)
3. Interfacing
VPC-DNHDA A&E Spec – Mar 2017
Page 2 of 3
A & E Specification – VPC-DNHDA Box Camera
3.1. Video Output: BNC
3.2. Video Out Mode: Sliding switch on rear of camera to select between HD and CVBS at the BNC
3.3. Input Power: 2 pin terminal block on rear of camera
VPC-DNHDA A&E Spec – Mar 2017
Page 2 of 3
A & E Specification – VPC-DNHDA Box Camera
4. Electrical
4.1. Power supply: 12VDC (-10% to +15%), 24VAC (+/- 10%)
VPC-DNHDA A&E Spec – Mar 2017
Page 2 of 3
A & E Specification – VVRD28V12MHDA Vandal Resistant Dome
4.2. Power consumption: 250mA, 3W @12VDC / 125mA, 3W @24VAC
5. Physical
VPC-DNHDA A&E Spec – Mar 2017
Page 2 of 3
A & E Specification – VVRD28V12MHDA Vandal Resistant Dome
5.1. Mounting options: 2 x ¼ - 20UNC (top and bottom)
5.2. Material: Aluminium and plastic casing
5.3. Housing Colour: Grey
5.6. Dimensions (unit): 63 (H) x 185 (W) x 115 (L) mm
5.7. Dimensions (boxed): 90 (H) x 185 (W) x 115 (D) mm
5.8. Weight (net): 253g
5.9. Weight (gross): 420g
6. Environmental
6.1. Operating temperature: -10° to +50°C
6.2. Storage temperature: -20° to +60°C
6.3. Operating humidity: 0-90% (non-condensing)
6.4. IP Rating: IP20
6.5. Impact resistance: IK0
7. Approvals
7.1. CE & RoHS2: 2011/65/EU
8. Vista Model Numbers
8.1 0146410 VPC-DNHDA
VPC-DNHDA A&E Spec – Mar 2017
Page 2 of 3