Firmware Upgrade for WIP330 - for Administrators Only

Release Notes for -- Linksys WIP330 Firmware Upgrade

WIP330 - Wireless-G IP Phone (with Browser)

Copyright (C) 2007 by Linksys, a Division of Cisco Systems, Inc.

All Rights Reserved.

* * * * * * * * * * IMPORTANT * * * * * * * * * * * * * * * * *

* Use of Proprietary Information and Copyright Notice: *

* This release note document contains proprietary information *

* that is to be used only by Cisco/Linksys customers. *

* Any unauthorized disclosure, copying, distribution, or use *

* of this information is prohibited. *

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Firmware Upgrade for WIP330 - For Administrators Only

This firmware upgrade is only if the current firmware is higher than V1.00.06A

Before you upgrade, verify the firmware version in the WIP330:

- Select Information from the Main menu.

- Scroll to Image Version to verify the firmware version.

1.  Connect the USB mini-B connector to the WIP330 and electrical outlet.

2.  Select Phone Settings from the WIP330 Main menu

3.  Select Upgrade

§  At Download URL: enter https://www.wip330.com

§  At OS Image File: enter wip330_v1_02_12S.bin

4.  Press Upgrade. Do not disconnect the power or turn off the WIP330 during the upgrade.

5.  When this upgrade step is complete, the WIP330 will automatically power itself off and then on.

This firmware upgrade is only if the current firmware is l V1.00.06A or lower

Before you upgrade, verify the firmware version in the WIP330:

- Select Information from the Main menu.

- Scroll to ImageVersion to verify the firmware version.

There are two (2) steps to upgrade the firmware on the WIP330. These must be done in the sequence listed below:

Step 1

1.  Connect the USB mini-B connector to the WIP330 and electrical outlet.

2.  Select Phone Settings from the WIP330 Main menu

3.  Select Upgrade

§  At Download URL: https://www.wip330.com

§  At OS Image File: wip330_sbe.bin

4.  Press Upgrade. The process takes several minutes. Do not disconnect the power or turn off the WIP330 during the upgrade.

(Note: During the upgrade process, WIP330 will reboot once and than continue with the upgrade. Please do not disrupt the process)

5.  When this upgrade step is complete, the WIP330 will automatically power itself off and then on.

Go to Step 2.

Step 2

1.  Reselect the Network from the Wireless menu

2.  Select Phone Settings from the WIP330 Main menu

3.  Select Upgrade

§  At Download URL: enter https://www.wip330.com

§  At OS Image File: enter wip330_v1_02_12S.bin

4.  Press Upgrade. Do not disconnect the power or turn off the WIP330 during the upgrade.

5.  When this upgrade step is complete, the WIP330 will automatically power itself off and then on.