CERTIFICATE No. ME5056

EUROCON BUILDING INDUSTRIES FZE
(a subsidiary of MULK HOLDINGS FZC)

EUROCON BUILDING INDUSTRIES FZE

(a subsidiary of MULK HOLDINGS FZC)

P.O. Box 42642

HamriyahFreezone

Sharjah

UAE

Tel: 00971 6 526 2202Fax: 00971 6 526 2203

Have been assessed against the requirements of the test standard(s)

denoted below and are approved for use subject to the conditions

appended hereto:

______

CERTIFIED PRODUCT / TEST STANDARD
ALUBOND USA FR- B1 – 6mm
ALUBOND USA FR- B1 – 4mm / ASTM E84
ASTM E84

Signed and sealed for and on behalf of Warrington Certification Ltd

Sir Ken KnightIssued: 5th September 2014

Chairman - Management CouncilRevised: 19th March 2015

Valid to: 4th September 2019

Page 1 of 3

Approved Manufacturing Location

P.O. Box 42642

HamriyahFreezone

Sharjah

UAE

Certification Evidence

1-Exova Test report No. 14-002-510 (A) and 14-002-510 (B)

2-Sampling and Factory inspections / reports conducted by Warrington Certification Limited

Product Description

The “Alubond USA FR” productsare described below:

General description / Alubond USA Fireretardant grade aluminium composite Sheet
Product Name / “Alubond USA FR-B1”
Overall thickness / 4 mm
Overall Density / For Aluminium 2.71 g/cm³; For FR-B1 core = 1.5 g/cm³;Overall = 1.7 g/cm³
Fire side / 0.5 mmaluminium facing coated withPVDF paint
Non fire side / 0.5 mmaluminium facing service coated with PE /Epoxy Paint
Core Material / The sponsor provided this information which was deemed to be confidential
but it is held on WCL’s confidential technical file
General description / Alubond USA Fireretardant grade aluminium composite Sheet
Product Name / “Alubond USA FR-B1”
Overall thickness / 6mm
Overall Density / For Aluminium 2.71 g/cm³; For FR-B1 core = 1.5 g/cm³;Overall = 1.7 g/cm³
Fire side / 0.5 mmaluminium facing coated withPVDF paint
Non fire side / 0.5 mmaluminium facing service coated with PE /Epoxy Paint
Core Material / The sponsor provided this information which was deemed to be confidential
but it is held on WCL’s confidential technical file

This certification relates only to exposure conditions as described above.

Product Performance

Authorities having jurisdiction usually refer to these categories:

Flame-Spread Index Smoke Development

Class 1 or A 0 - 25 450 Maximum

Class 2 or B 26 - 75 450 Maximum

Class 3 or C 76 - 200 450 Maximum

Test results

Product / Flame Spread Index
(FSI) / Smoke Development
(SD) / Classification
Alubond USA FR – 4mm / 0 / 15 / Class A or 1
Alubond USA FR – 6mm / 0 / 0 / Class A or 1

Information

  1. It is the responsibility of the user of the information contained within this document to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use of the product
  1. The performance stated herein relates only to the specimens of the product in the form in which they were tested.
  1. This certification relates to on-going production. Board product and/or its immediate packaging shall be identified with the certification mark including the certification number, and the manufacturer’s name and the product name or code reference.

Page 1 of 3 Signed / / Issued: 5th September 2014
Revised: 19th March 2015
Valid to: 4th September 2019