DOWSIL PRINT REVIEW SUBMITTAL FORM
*Please allow at least two weeks for completion of your review; provided information below is provided in its entirety.
**Please fill out completely. Information is needed to expedite the login process and may effect timing of the review completion.
Project Conditions:
Date Sent: Project Name:
System Type: 1, 2, 3, or 4 sided structural glazing? 1 2 3 4 4+ Weatherseal only
Is the weight of the panels supported?Yes or No
Structurally Glazed Glass/Panel type: Clear LaminatedInsulatedOther
The weight of the largest panel : kg / pound
Max Wall Wind Load* psf
*For multiple windload zones, other than wall/corner, please provide a table/description of max StructurallyGlazed Glass/Panel size in each Wind Load zone along with the print. Please attach separately.
Largest Structurally Glazed Glass/Panel in Wall Wind Load Zone in X in
This largest Structurally Glazed Glass/Panel Wall Zone is shown on elevation; detail page
Structural Silicone Bite inchesStructural Silicone Glueline Thickness inches
Max Corner Wind Load* psf
Largest Structurally Glazed Glass/Panelin Corner Wind Load Zonein X in
This largest Structurally Glazed Glass/Panelin Corner shown on elevation; detail page
Structural Silicone Bite inchesStructural Silicone Glueline Thickness inches
*Please show structural dimensions in detail
Max Wind Load psf Structurally Glazed Glass/Panel weight psf
Largest Sloped Structurally Glazed Glass/Panel in X in
Shown on: elevation ; detail page
Sloped Inward or Outward
° Degrees from Vertical or Horizontal
Anodized AluminumOther
EPDM Silicone Other (gaskets, setting blocks etc. touching silicone)
795983SGS995 121 Other
756 790 791 795 995 758 121 Other
If any other types of sealant come into contact with the Silicone, please specify type:
Project Information:
Project Name:Street Address:
City/State/Province/Zip Code
Customer Job Number:
Submitter Information:
Contact
Name: / PhoneNumber:
Company
Name: / Fax
Number:
Street
Address: / Email
Address:
City/State/
Postal Code: / Company
Website:
Extra Information
Special Requests:
Carbon Copy Letter to, if any:
Full Name / Company Name / Email AddressLIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be
accurate. However, because conditions and methods of use of our products are
beyond our control, this information should not be used in substitution for
customer’s tests to ensure that our products are safe, effective and fully
satisfactory for the intended end use. Suggestions of use shall not be taken as
inducements to infringe any patent.
Dow’s sole warranty is that our products will meet the sales
specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of
purchase price or replacement of any product shown to be other than as
warranted.
DOW SPECIFICALLY DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW DISCLAIMS LIABILITY FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES.
DOWSILis a registered trademark of Dow Corporation.
XIAMETER is a registered trademark of Dow Corporation.
©2010-©2013 Dow Corporation. All rights reserved.
Printed in USA Form No.63-1198B-01 Revised 10-1-2013