Instructions for Using theNEPA Projects Tracking Spreadsheet

Introduction

The purpose of the NEPA Projects Tracking Spreadsheet is to systematically track the NEPA processing timeframes for all State Highway System projects under NEPA delegation. The spreadsheet will be used to evaluate whether the streamlining objectives under NEPA delegation are being achieved. The spreadsheet information will be incorporated into required monitoring reports related to NEPA delegation, including FHWA’s Section 6005 Pilot Program audit report; Caltrans’ quarterly performance reports under Section 6004 and Section 6005; and Caltrans’ reports to the State Legislature related to its waiver of sovereign immunity, as required by Assembly Bill (AB) 1039 and AB 2650.

The spreadsheet is to be completed by designated District/Region environmental staff for all State Highway System projects (including locally-sponsored projects), including Categorical Exclusions (CE), environmental assessments (EA), environmental impact statements (EIS), and supplemental environmental documents (SED). All applicable data fields on the spreadsheet must be completed based on the following guidance. For some projects, especially projects processed with a CE, many of the data fields will not be relevant. If a data field is not applicable, then indicate “NA”.

Districts may add data fields to the spreadsheet as necessary for other internal district purposes, such as tracking CEQA documents, however, the spreadsheet transmitted to headquarters must only include the original fields and options within those fields. Districts may also create other versions of the tracking spreadsheet (a simplified version for CE projects, for example), as long as the NEPA Projects Tracking Spreadsheet is completed and kept up-to-date.

Each District/Region is responsible for keeping its spreadsheet up-to-date. It is essential that the spreadsheet information be entered on an ongoing basis - data on milestones, actions, and decisions for each project should be entered as they occur - so that spreadsheet information requests can be responded to within five business days. At a minimum, Headquarters will require that completed spreadsheets be submitted on a quarterly basis. Each District/Region will also identify a contact person for its spreadsheet for responding to information requests and questions.

How to Use the Spreadsheet

The NEPA Project Tracking Spreadsheet includes five worksheets:

  1. “Tracking NEPA Projects”: This worksheet is the main spreadsheet for tracking NEPA processing timeframes, including those related to Section 106 of the National Historic Preservation Act and Section 7 of the federal Endangered Species Act.
  1. “Section 4(f)”: This worksheet tracks Section 4(f) evaluations for CE projects and for those projects in which the Section 4(f) evaluation is not circulated with the draft environmental document (DED) and/or final environmental document (FED). Projects in which the Section 4(f) evaluation is a part of the environmental document should be tracked on the main spreadsheet.
  1. “De-minimis 4(f)”: This worksheet tracks SAFETEA-LU Section 6009 reporting requirements for de-minimis 4(f) findings.
  1. “1039 Agencies”: This worksheet contains a comprehensive list of state and federal agencies that typically comment on DEDs, along with the relevant acronyms to be used in the spreadsheet.
  1. “Comments Codes”: This worksheet identifies a variety of possible comment codes that can used to explain the reasons for delayed processing and approval timeframes. One or more comment codes can be entered, as appropriate. If further explanation is required to describe reasons for delays, then use the “Other General Project Comments” column.

The main “Tracking NEPA Projects” spreadsheet is divided into fourteen major sections for identifying each project and tracking major environmental approvals. The twelve major sections are described briefly below:

·  “Project Identification and General Information” identifies each project. When printing the spreadsheet, the District and Expenditure Authorization (EA) columns will automatically print on each page.

·  “Project Start Up” identifies dates associated with the start of the NEPA process.

·  “NEPA/404 Applicable?” identifies whether the NEPA/404 integration process has been invoked. The “it (interagency tracking)” database is to be used for tracking timeframes related to the integration process.

·  “Section 4(f) Applicability” identifies whether Section 4(f) applies and the type of Section 4(f) finding.

·  “Draft ED” identifies major milestones related to the DED, including Caltrans District quality control (QC), Legal, and Headquarters (HQ) reviews, and approval of the DED for public review.

·  “State and Federal Commenting Agencies per 1039 Report” identifies those State and Federal agencies that commented on the DED during the public review process. This information is tracked in the spreadsheet because the State Legislature has required that Caltrans include this information in the AB 1039/2650 reports.

·  “Section 106” identifies major milestones related to the approval of the Finding of Effect (FOE) report and the Memorandum of Agreement (MOA) under Section 106 of the National Historic Preservation Act. The “it” database is to be used for other Section 106 milestones for the 106 Programmatic Agreement Annual Report.

·  “Section 7/EFH” identifies dates for findings made by U.S. Fish and Wildlife Service (FWS) and National Marine Fisheries Service (NMFS) under Section 7 of the federal Endangered Species Act (ESA) and by NMFS for Essential Fish Habitat (EFH) evaluations under the Magnuson-Stevens Fishery Conservation and Management Act (MSA).

·  “Air Quality Conformity” identifies dates for when the air quality conformity determination request was submitted to FHWA and the date FHWA provided a conformity determination.

·  “Final ED” identifies major milestones related to the FED, including Caltrans District QC, Legal, and HQ reviews, and approval of the FED.

·  “Record of Decision (ROD)” identifies dates in which the ROD was reviewed and approved.

·  “Re-validation” identifies when re-validations were completed for a project environmental document or CE that needed to be updated or needs a new document/CE.

·  “Environmental Commitments” identifies major milestones related to tracking and implementing environmental commitments called for in the ED.

·  “Other General Project Comments” provides space to enter general open-ended comments regarding the NEPA processing timeframes. This field has no character limit and may be expanded as necessary. To change the row height to fit the contents, double-click the boundary below the row heading on the left side of the page.

The sections identified above related to the DED, Section 106, Section 7/EFH, FED, and ROD contain “Comments” columns in which comment codes may be entered to explain the reasons for delayed processing and approval timeframes. As noted above, additional open-ended comments may also be provided in the “Other General Projects Comments” column.

Explanation of Spreadsheet Columns and Interactive Elements

Table 1 provides an explanation of each of the columns on the Tracking NEPA Projects spreadsheet. Table 2 defines the columns in the Section 4(f) spreadsheet. Table 3 defines

acronyms used in the spreadsheet.

The “Tracking NEPA Projects” and “Section 4(f)” spreadsheets use pop-up comments and drop-down menus that provide additional assistance when entering information:

·  Pop-ups: Pop-up comments are used in those cells that provide reminders or instructions. These cells have a red triangle in the top right corner. A pop-up comment will appear when the mouse is rolled over these cells. All “Comments” cells except for “Other General Project Comments” have pop-up comments that reference the “Comments Codes” worksheet. The “Section 4(f) Applicability” and “State & Federal Commenting Agencies Per 1039 Report” cells also have pop-up comments that reference the applicable worksheets.

·  Drop-down menus: Drop-down menus are used in those cells that identify a range of possible pre-defined entries. A dropdown arrow appears to the right of the cell when the cell is clicked. Cells with drop-down menus cannot be modified, and will not accept entries that do not match the drop-down list. Only one entry can be selected from each drop-down menu.

1

Revised 6/26/2009

Table 1. Explanation of “Tracking NEPA Projects” Spreadsheet Columns
/
Column Name / Information to be Provided in Column /

Project Identification

Dist.-EA / Two-digit District number and five-digit Expenditure Authorization number (two numbers should be separated by a hyphen). Include a zero before Districts 1 through 9 (01, 02, etc). Do not include the sixth digit of EA number indicating phase of project
Co / County
Rte / State highway route number
Post mile / Start and end post mile

General Information

Project Name/Description / Project name or description
Agency / Identify Caltrans for Caltrans-sponsored projects on the State Highway System. Identify name of local agency if locally sponsored project on the State Highway System.
NEPA Doc type / Click on the appropriate document type in the drop down box.
CT NEPA Assignment / Click yes if Caltrans has been assigned NEPA under Sections 6004 or 6005. Click no if FHWA has retained NEPA responsibilities.
Delivery Plan Information
DED Current / Enter planned DED delivery date from the Delivery Plan only when DED Delivery Plan date is in current FY. Do not enter future year dates.
PAED Current / Enter current FY delivery date only from the Delivery Plan (if PAED date is not in current FY, do not enter).
Project Contact Information
Name / Enter the name of the project contact, usually the environmental senior or generalist/environmental coordinator.
Phone / Enter the phone number of the project contact.

Project Start-Up

NOI / For EIS projects, date Notice of Intent (NOI) published in the Federal Register
Begin Env. Studies / Date that environmental studies begin based on District/Region practice (such as date of Begin Environmental Studies memo, when charges to WBS code 165 begin, etc). If EIS project, use date of NOI.
Class of Action Determination / Enter the date the Class of Action Determination concurrence was obtained from the Headquarters Environmental Coordinator for EA and EIS projects.

NEPA/404 Applicable?

/ Click “yes” if the NEPA/404 integration process is invoked. Otherwise, click “no”. Use “it “database for tracking integration process timeline.
Section 4(f) Applicability
Y/N / Click “yes” if Section 4(f) applies; click “no” if Section 4(f) does not apply.
Type / If Section 4(f) applies, click on applicable Section 4(f) finding and/or type in the drop-down box, and complete the Section 4(f) worksheet if appropriate. If Section 4(f) does not apply, you may leave this field blank.
The Section 4(f) worksheet is to be used for CE projects and for those in which the Section 4(f) evaluation is not circulated with the DED and/or FED.
If a project has 4(f) resources with de-minimis findings, document the de-minimis findings in the “De-minimis 4(f )” worksheet. If a project has multiple 4(f) evaluations (such as a programmatic and individual evaluation), document the timeline for the highest level 4(f) evaluation and use the ‘Other General Project Comments” column to document the multiple 4(f) evaluations.

Draft ED

Admin DED Complete; Begin Dist. QC / Date that the administrative DED is complete, and the District QC process begins. For CE projects, enter NA in DED columns.
Dist. DED QC Complete / Date that Caltrans District QC review is completed.
Submit Admin DED to Legal / Date that District submits DED to Caltrans Legal for review. Legal review is required for all EISs. If Legal reviews an EA, include this date.
Legal Comments on Admin DED / Date that Caltrans Legal completes its review of DED. If multiple review cycles, enter date that Legal provides final comments and note multiple reviews in comments section.
Dist. Response to Legal Comments / Date that District completes final revisions to DED based on Legal comments.
Admin DED Legal Review Complete / Date of Caltrans Legal sign-off of DED.
Submit Admin DED to HQ / Date that District submits DED to Caltrans HQ for review. HQ’s review is required for all EISs and complex EAs. If HQ reviews a routine EA, include this date.
HQ Comments on Admin DED / Date that HQ completes its review of DED. If multiple review cycles, enter date that HQ provides final comments and note multiple reviews in comments section.
Dist. Response to HQ Comments / Date that District completes final revisions to DED based on HQ’s comments.
Comments on DED Review / Enter applicable comment codes from Comment Codes worksheet. If further explanation is required to describe reasons for delays (including delays unrelated to environmental such as those associated with the Draft Project Report), then use the “Other General Project Comments” column.
DED Ready for Signature / Date that DED title page is deemed to be ready for signature. For EISs and complex EAs, HQ’s input is required to make this determination.
DED Signed / Date that DED title page is signed.
DED Circulated / Date that draft EIS or draft EA public review period begins based on published notices.
Public Hearing/Meeting / Date that public hearing/meeting held on DED. if applicable. If multiple public hearings or meetings were held, only enter date of last public meeting/hearing. If no public meeting/hearing held, enter NA.
DED Public Comment Period Closed / Date that draft EIS or draft EA public review period ends based on published notice(s).
State & Federal Commenting Agencies Per 1039 Report / Enter acronyms (from “1039 Agencies worksheet”) of each agency that commented on the DED during the public review period. If an agency is not listed on the worksheet, then enter the agency’s name using its standard acronym.

Section 106

Section 106 FOE / Click on the applicable Finding of Effect (FOE) in the drop-down box: None, No Historic Property Affected (NHPA), No Adverse Effect with Standard Conditions (NAE/SC), No Adverse Effect (NAE), and Adverse Effect (AE).
Submit FOE to HQ / Date that District submits NAE/AE to HQ for review.
HQ Submit FOE to SHPO / Date that HQ submits NAE/AE to SHPO for concurrence.
SHPO concurs / Date that SHPO approves the NAE/AE.
Submit MOA to HQ / Date that District submits 106 MOA to HQ for review.
HQ Submit MOA to SHPO / Date that HQ submits the 106 MOA to SHPO for consultation.
MOA signed / Date of the last signature on the MOA.
Comments on 106 Consultation / Enter applicable comment codes from Comment Codes worksheet. If further explanation is required to describe reasons for delays, then use the “Other General Project Comments” column.

Section 7/EFH Consultation

Submit BA/BE to FWS / Date that Caltrans submits Section 7 biological assessment (BA) or biological evaluation (BE) to the FWS for review.
FWS Finding / Click on the applicable finding: “Letter of concurrence” or “Biological Opinion (BO)”.