HUSNAIN AHMED
Metallurgical & Materials Engineer
MS (Materials and Surface Engineering)
B.E. (Metallurgy and Material Science)
CELL: 00966-533505685 / 00966-538382445
E-mail:
OBJECTIVE: To work in a reputed organization and build personal credibility by delivering extra ordinary performance through efficient and creative work so as to become an authority in the relevant field
PERSONAL DETAILS Father Name: Nisar Ahmed
Date of Birth 16th Nov 1976
Marital Status: Married (02 kids)
PROFESSIONAL
EDUCATION
MS (Material & Surface Engineering) School of Chemical & Material Engineering, National University of Science & Technology (NUST) Islamabad, Pakistan
Session CGPA Position
(2008-2010) 3.95 / 4.0 2nd in Univ.
B.E (Metallurgy & Material Science) Institute of Chemical Engineering & Technology, University of the Punjab Lahore, Pakistan
Session %age Position
(1995-2000) 80.2 % 1st in Univ.
HSSC (1994) Govt. Post Graduate College Jhelum, Pakistan
SSC (1992) F.G. Boys Public High School Jhelum, Pakistan
ROLL OF HONOUR Winner of Gold Medal at under-graduate level.
Winner of Silver Medal at post-graduate level.
RESEARCH WORK MS Research work “Micro structural characterization and failure investigation of nickel based super alloy”
B.E Research work “Study of mechanical properties of locally produced as cast Al-Cu-Mg alloy”.
INDUSTRIAL TRAINING Six week training in Telephone Industries of Pakistan (TIP) Haripur, Pakistan in the following deptts.
Material Testing Laboratory , Die Casting Shop, Injection Molding Shop, PCB shop &Tool Shop
COMPUTER SKILLS MS-WORD, MS-EXCEL, MS-POWERPOINT AUTOCAD
COURSES
Ø Successful completion of NDT Level-I & II of Ultrasonic Testing Course organized by National Center for Non-Destructive Testing Pakistan Atomic Energy Commission Islamabad, Pakistan
Ø Successful completion of NDT Level-I & II Surface Methods Testing Course (Dye Penetrant & Magnetic Particle Inspection) organized by National Center for Non-Destructive Testing Pakistan Atomic Energy Commission Islamabad, Pakistan
Ø Successful completion of NDT Level-1 Radiographic Testing Course organized by National Center for Non-Destructive Testing Pakistan Atomic Energy Commission Islamabad, Pakistan
Ø Participation in three days training course on ISO /IEC 17025 (General Requirements for the competence of testing and calibration laboratories) organized by Pakistan Institute of Quality Control Lahore, Pakistan in Jan 2007.
RESEARCH & TEACHING
ACTIVITIES Participated in the 9th International Symposium on advanced Materials (ISAM-2005) organized by Dr. A.Q Khan Research Labs Islamabad, Pakistan and presented research paper entitled “Modern NDT techniques applied to composite parts”. Received Commendation certificate from top management.
Developed curriculum for departmental promotion examination (DPE) in the filed of metallurgy & material science and complied a book entitled “Metallurgy” which is being taught as Text Book for Diploma in Associate Engineer (DAE) students. Received Commendation certificate for this work.
Delivered lectures and technical talks on regular basis regarding various metallurgical and material testing topics.
WORK EXPERIENCE Total Work Experience: > 12 Years
Ø Worked as Manager (Metallurgy) in Air Weapons Complex (AWC) Wah Cantt, Pakistan in Quality Assurance Deptt from May 2005 to September 2012. Independently managed Material Testing Lab, as Officer Incharge, having following facilities / instruments:
Optical Emission Spectrometer (OES), Scanning Electron Microscope (SEM), Energy Dispersive Spectrometer (EDX), Rockwell, Vickers & Shore Hardness Testers, Universal Testing Machine, Ultrasonic Flaw Detector, Magnetic Particle Tester, X-Ray Radiographic testing machine, Metallographic sample preparation and macro / micro examination with stereo zoom and metallurgical microscope respectively.
Involved in failure investigation of Air Craft components & failure report writing.
Responsible for implementation of ISO-9001:2008, AS-9100 Rev C & ISO-17025 Quality, Aerospace & International Laboratory Standard for the competence in testing respectively. (As applicable to material testing lab)
Ø Worked as Assistant Manager (Metallurgy) in Pakistan Ordnance Factories (POFs) Wah Cantt, Pakistan in Metallurgical Laboratory for four years and responsible for technical and administrative control of
Spectrometric Lab, Metallographic Lab, Mechanical Testing Lab, NDT Lab, Heat Treatment Lab, Analytical & Physical Labs.
Responsible for implementation of ISO-9000: 2000, ISO-14001 & ISO-17025 Quality, Environmental and Laboratory Management Systems as applicable to above mentioned labs.
Ø Worked as Metallurgical Engineer in Pakistan Council of Scientific & Industrial Research (PCSIR) Labs Complex, Lahore, Pakistan for nearly one year in Minerals & Metallurgy Research Center (MMRC) in the following fields / sections.
Metallography, Mechanical Testing lab, Chemical Analysis lab, Foundry
Ø Worked in Pakistan Spring & Engineering Company Kot Lakhpat Lahore, Pakistan for two months in the following shops.
Spring manufacturing shop, Sheet Metal Fabrication Shop, Heat treatment & Electroplating shops.
LANGUAGE PROFICIENCY English, Urdu, Punjabi, French
PROFESSIONAL AFFILIATION
Lifetime member of Pakistan Engineering Council (PEC).
Ref # METAL / 1456
Lifetime member of Corrosion Engineers Society of Pakistan
“Certified Industrial Radiographer” with thorough knowledge of radiation safety, certified by Pakistan Nuclear Regulatory Authority (PNRA) Islamabad.
REFERENCES Dr Muhammad Bilal Khan Dean School of Chemical and Materials Engineering (SCME), National University of Science & Technology (NUST), H-12 Islamabad, Pakistan.
Email:
Dr. Muhammad Mujahid Professor and Head of Materials Engineering Deptt, School of Chemical and Materials Engineering (SCME), National University of Science & Technology (NUST), H-12 Islamabad, Pakistan.
Cell: +923005008530
Email:
Dr Taqi Zahid Butt Professor of Metallurgy, Institute of Chemical Engineering & Technology (ICET) University of the Punjab Lahore, Pakistan.
Email:
Dr. Muhammad Islam, Assistant Professor (PhD Materials Engineering) King Saud University KSA.
Cell: +966544523909
Email: