Head Officeof State Oil Company of Azerbaijan Republic (SOCAR)

announces an open procurement competition (№12003-17) in order to provide the requirement of Explosives and equipment

Documents to be submitted for participation in the competition:
  • Application letter for participation in the competition (the letter is attached);
  • Bank document on payment of the participation fee;
  • Bid.
Application for participation in the competition (signed and sealed) and the bank document on payment for participation fee should be submitted in Azerbaijani, Russian or English languages no later than11.05.2017, 5:30 p.m.by Baku time, to the address of the Purchasing organization specified in the notice.
The copies of the required documents (except the bid)may be sent to the e-mail address of the contact person specified in the notice. In this case, the originalsof the documents shall be submitted to the Purchasing Organization until the last day of submission of the bids.
The deadline for submission of the bids:
  • An original and two copies of the bid shall be submitted to the Purchasing Organization before22.05.2017, 11:00 a.m.by Baku time.
  • Late bids shall be rejected without opening.

The acquisition of the aninvitation to bid and participation fee:
  • Those wishing to acquirean invitation to bid in Azerbaijani or English languages can obtain it from the contact person in electronic or print form after paying
  • LOT-1 413 manat (VATincluded),
  • LOT-2 590 manat (VATincluded),
  • LOT-3354 manat (VATincluded),
  • LOT-4170 manat (VATincluded),
  • LOT-5118 manat (VATincluded),
  • LOT-6177 manat (VATincluded)
or an equivalent amount in any other freely convertible currency to the below-mentioned account, till the date specified in the paragraph I of the notice, on any business day of the week from 09:30 a.m. to 05:30 p.m.
  • Account number:
International Bank of Azerbaijan OJSC,
AZ38IBAZ38010019449306332120,
TIN: 9900003871,
Customer Services Department,
Code: 805250,
Correspondent account: AZ03NABZ01350100000000002944,
TIN: 9900001881,
SWIFT BIK: İBAZAZ2Х
  • The participation fee is not refundable

Bank guarantee:
  • Tender guarantee/bid bond to be submitted by the Bidder shall not be less than 2 (two) % of the total amount of the tender price(Not applicable to LOT-5th).
  • An advance payment bond shall be at least equal to the sum of advance(Not applicable to LOT-5th).
  • Contract performance bond is set at 5 % of the purchase contract value(Not applicable to LOT-5th).

The execution date of the Contract:
It is required to fulfill the conditions of the purchase contract during the 120 calendar days.
The address of the Purchasing organization:
Azerbaijan Republic, Baku city, Heydar Aliyev ave, 83A, AZ1033
Contact person:
Farhad Badirbeyli
Deputy chief, Procurement Department, Geophysical and Geological Department (GGD)
Phone: + 994012 521-04-17
Fax: + 994012 521-04-17
E-mail:
The notice, information about the subject of procurement and application form to obtain tan invitation to bid are placed at theinternet site:
()
Time, place and the opening date of bids:
Bids will be opened on 22.05.2017at 11:00 a.m.byBaku timeat the address of the Purchasing Organization specified in paragraph VI of the notice.
An information about contracts awards:
An information about the final results of the competition can be obtained from the following web link:

The procurement group of Head Office, SOCAR

(In the firm blank of the applicant)

Application form for participation in open competition and for acquisition of ITB-Invitation to Bid (Set of Basic Conditions)

______city“__”______20__

______No.

Attn.: Mr.Sarvan Mansurov

The Manager of purchasing group of Geophysical and Geological Department, SOCAR

Hereby we,[full name of the applicant consignor (Contractor) is specified]confirm the intent of participation in an open competitionNo. 12003-17(insert lot number) announced by Geophysical and Geological Department, SOCARfor purchasing Explosives and equipment.

At the same time, we confirm the absence of any cancellation or bankruptcy procedures, activity interruption in relation to [full name of the applicant consignor (Contractor) is specified] or any situation making it’sparticipationimpossible.

We kindly ask You to send the soft copy of an invitation to bid to the following e-mail address:______.

The contact information for propmtly responding the queries relating the documents submitted by us and other issues:

  • Contact person: ______
  • Position of the contact person: ______
  • Phone number: ______
  • Fax: ______
  • E-mail address: ______

Appendix:

  1. Original of the bank document on payment of the participation fee – __ pages.

______

(name, surname, patronymic of the responsible person) (signature of responsible person)

______

(position of responsible person)

Seal

THE LIST OF PURCHASING GOODS

LOT-1
TECHNICAL SPECIFICATIONS OF EXPLOSIVES USED IN OIL AND GAS WELLS
№ / Type of equipment, materials, and parts / Technical parameters of explosives / Unit of measure / Total amount / Standard
1. / Set of expandable perforating gun of small diameter 54mm / 1m/20, phase 60°, penetration of bulletmin.600 mm, hole diameter 8.7 mm, temperature-pressure 150C°/100MPa / item / 15000 / 1. API RP 19B
2. API RP 43
3. ISO 9001: 2008
4. QOST R 55778-2013
2. / Set of expandable perforating gun of small diameter 43 mm / 1m/20, phase 60°, penetration of bulletmin.440 mm, hole diameter 8.0 mm, temperature- pressure 150C°/100MPa / item / 15000 / 1. API RP 19B
2. API RP 43
3. ISO 9001: 2008
4. QOST R 55778-2013
LOT-2
TECHNICAL SPECIFICATIONS OF EXPLOSIVES USED IN OIL AND GAS WELLS
№ / Type of equipment, materials, and parts / Technical parameters of explosives / Unit of measure / Total amount / Standard
1. / Perforating gun set applied for wireline perforation in
4-4 1/2"cased wells / 1m/10-20 holes, phase 60°, penetration of bullet min.860 mm, hole diameter 10.4 mm, temperature- pressure 175C°/140MPa / item / 15000 / 1. API RP 19B
2. API RP 43
3. ISO 9001: 2008
4. QOST R 55778-2013
2. / Perforating gun set applied for TCP in 4-4 1/2" cased wells / 1m/20, phase 60°,penetration of bullet min.860 mm, hole diameter 10.4 mm, temperature- pressure 175C°/140MPa / item / 15000 / 1. API RP 19B
2. API RP 43
3. ISO 9001: 2008
4. QOST R 55778-2013
3. / Perforating gun set applied for wireline perforation in 5-6" cased wells / 1m/10-20 holes, phase 60°, penetration of bullet min.1000 mm, hole diameter 10.9 mm, temperature- pressure 175C°/140MPa / item / 15000 / 1. API RP 19B
2. API RP 43
3. ISO 9001: 2008
4. QOST R 55778-2013
4. / Hollow carrier perforating gun set applied for TCP in 5-6" cased wells / 1m/20, phase 60°, penetration of bullet min.1000 mm, hole diameter 10.9 mm,temperature- pressure 175C°/140MPa / item / 15000 / 1. API RP 19B
2. API RP 43
3. ISO 9001: 2008
4. QOST R 55778-2013
5. / Hollow carrier perforating gun applied for perforation with small diameter wire of 40 mm / 1m/20, hole depth min.330 mm, penetration of bullet 4.8 mm, temperature- pressure 175C°/140MPa / item / 5000 / 1. API RP 19B
2. API RP 43
3. ISO 9001: 2008
4. QOST R 55778-2013
LOT-3
TECHNICAL SPESIFICATIONS OF EXPLOSIVES USED IN OIL AND GAS WELLS
№ / Type of equipment, materials, and parts /

Technical parameters of explosives

/

Unit of measure

/

Total amount

/

Standard

1. / Stand-alone gauge of bottom-hole temperature and pressure / Temperature- pressure 175C°/140Mpa(for use with TCP in cased wells of 4-4 1/2" diameter) 1set-2 gauges / set / 2 / 1. ISO 9001: 2008
2. ГОСТ 26116-84
2. / Stand-alone gauge of bottom-hole temperature and pressure / Temperature- pressure 175C°/140Mpa(for use with TCP in cased wells of 5-6" diameter) 1set-2 gauges / set / 2 / 1. ISO 9001: 2008
2. ГОСТ 26116-84
3. / Shooting GR/CCL/SS-Titan-70 mm / Diameter -70 mmtemperature- pressure 175C°/140Mpa(for use by wireline in cased wells of 4-5-6” diameter) 1set-2 gauges / set / 2 / 1. API RP 67
2. ISO 9001: 2008
LOT-4
TECHNICAL SPESIFICATIONS OF EXPLOSIVES USED IN OIL AND GAS WELLS
№ / Type of equipment, materials, and parts /

Technical parameters of explosives

/

Unit of measure

/

Total amount

/

Standard

1. / Warrior Logging station with Shooting Panel / 3.0 GHz multi-core processor
8 GByte RAM1 TByteSata Hard DiskDual Display PCIe Graphics
USB 2.0/3.0 Ports
DVD-RW / set / 2 / 1. ISO 9001: 2008
2. API Spes Q1
3. MEK 529 -89 (İEC 60529)
4.API RP 67
LOT-5
TECHNICAL SPESIFICATIONS OF EXPLOSIVES USED IN OIL AND GAS WELLS
№ / Type of equipment, materials, and parts /

Technical parameters of explosives

/

Unit of measure

/

Total amount

/

Standard

1. / Radioactive marker Co-60 / Temperature-pressure 175C°/140MPa (for use with TCP in cased wells with 4-4 1/2" diameter) / item / 30 / 1. QOST 51919-2002 (İSO 9978:1992), İSO 2919: 2012
LOT-6
TECHNICAL SPESIFICATIONS OF EXPLOSIVES USED IN OIL AND GAS WELLS
№ / Type of equipment, materials, and parts /

Technical parameters of explosives

/

Unit of measure

/

Total amount

/

Standard

1. / Strip perforating gun set of small diameter 43mm / 1m/20, phase 60°, penetration of bullet min.440 mm, hole diameter 8.0 mm, temperature-pressure 150C°/100MPa / item / 5000 / 1. API RP 19B
2. API RP 43
3. ISO 9001: 2008
4. QOST R 55778-2013

1