Display Hidden Notes to Specifier. (Don't Know How? Click Here) s68

SECTION 12 93 00

SITE FURNISHING

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** Sitecraft; Site furnishing products.
.
This section is based on the products of Sitecraft, which is located at:
4302 Ditmars Blvd. 2nd Floor
Astoria, NY 11105
Toll Free Tel: 800-221-1448
Tel: 718-729-4900
Fax: 718-482-0661
Email: request info ()
Web: www.site-craft.com
[ Click Here ] for additional information.
Along the way, we've distinguished ourselves as craftsmen who have mastered cutting curves out of solid wood. We've built on this mastery to include custom designs in wood, metal, and recycled plastic, resulting in an unmatched repertoire that not only complements, but defines your site. Premium materials, handcrafted attention to detail found only in the finest benchmade furniture, and enduring quality are the signature of Sitecraft and the tangible expression of your unique vision.

1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

1.1.1 Benches.

1.1.2 Planters.

1.1.3 Planter Benches.

1.1.4 Suspended Planter Benches.

1.1.5 Tables.

1.1.6 Trash Receptacles.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

1.2.1 Section 31 20 00 - Earth Moving.

1.2.2 Section 32 10 00 - Bases, Ballasts, and Paving- Bases and Paving: Sidewalks.

1.2.3 Section 32 15 40 - Crushed Stone Surfacing- Aggregate Surfacing: Decorative Pebbles.

1.2.4 Section 32 90 00 - Planting.

1.2.5 Section 03 30 00 - Cast-in-Place Concrete.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

1.3.1 US Green Building Council.

1.4 SUBMITTALS

1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.4.2 Product Data: Manufacturer's data sheets on each product to be used, including:

1.4.2.1 Preparation instructions and recommendations.

1.4.2.2 Storage and handling requirements and recommendations.

1.4.2.3 Installation methods.

1.4.2.4 Maintenance instructions.

** NOTE TO SPECIFIER ** Delete the following paragraphs if LEED is not applicable.

1.4.3 LEED Submittals: Provide documentation of how the requirements of Credit will be met:

1.4.3.1 List of proposed materials with recycled content. Indicate post-consumer recycled content and pre-consumer recycled content for each product having recycled content.

1.4.3.2 Product data and certification letter indicating percentages by weight of post-consumer and pre-consumer recycled content for products having recycled content.

1.4.3.3 List of proposed materials with rapidly renewing content. Indicate rapidly renewing content percentage for each product having rapidly renewing content.

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

1.4.4 Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

1.4.5 Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

1.4.6 Manufacturer's Certificates: Certify products meet or exceed specified requirements.

1.4.7 Closeout Submittals: Provide manufacturer's maintenance instructions that include recommendations for periodic checking and adjustment and periodic cleaning and maintenance of all components.

1.5 QUALITY ASSURANCE

1.5.1 Manufacturer Qualifications: Minimum of 10 years experience manufacturing site furnishings.

1.5.2 Installer Qualifications: Minimum of 5 years experience assembling and installing site furnishings.

1.5.3 Single Source Responsibility:

1.5.3.1 Obtain each type and color of stone from a single source.

1.5.3.2 Obtain each type and color of mortar, adhesive and grout from the same source.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

1.5.4 Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

1.5.4.1 Finish areas designated by Architect.

1.5.4.2 Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.

1.5.4.3 Refinish mock-up area as required to produce acceptable work.

1.5.4.4 Accepted mock-ups shall be comparison standard for remaining Work

1.6 DELIVERY, STORAGE, AND HANDLING

1.6.1 Store products in manufacturer's unopened packaging until ready for installation.

1.6.2 Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.

1.7 SEQUENCING

1.7.1 Ensure that locating templates and other information required for installation of products of this section are furnished to affected trades in time to prevent interruption of construction progress.

1.7.2 Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

1.8 PROJECT CONDITIONS

1.8.1 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

1.9 WARRANTY

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: Sitecraft, which is located at: 4302 Ditmars Blvd. 2nd Floor; Astoria, NY 11105; Toll Free Tel: 800-221-1448; Tel: 718-729-4900; Fax: 718-482-0661; Email: request info (); Web: www.site-craft.com

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 MATERIALS GENERAL

2.2.1 Aluminum: Alloy and temper recommended by aluminum producer and finisher for type of use and finish indicated; free of surface blemishes.

2.2.2 Steel and Iron: Free of surface blemishes.

2.2.3 Stainless Steel: Free of surface blemishes.

2.2.4 Wood: Surfaced smooth on four sides with eased edges; kiln dried, free of knots.

2.2.5 Greenwood: High-Density haintenance free wood substitute

2.2.5.1 HDPE made from recycled material

2.2.5.2 Resistant to corrosive substances, oil and fuels, insects, fungi, salt spray, and other environmental stresses.

2.2.5.3 Does not absorb moisture.

2.2.5.4 Will not rot, splinter, or crack.

2.2.6 Anchors, Fasteners, Fittings, and Hardware: Manufacturer's standard, corrosion-resistant- coated or non-corrodible materials; commercial quality, tamperproof, vandal and theft resistant, concealed, recessed, and capped or plugged.

2.2.7 Non-shrink, Non-metallic Grout: Premixed, factory-packaged, non-staining, noncorrosive, nongaseous grout complying with ASTM C 1107; recommended in writing by manufacturer, for exterior applications.

2.3 BENCHES

** NOTE TO SPECIFIER ** Select the bench(s) required and delete those not required. All straight benches are available in standard sizes 5 foot, 6 foot, 7 foot, 8 foot or custom lengths. All decorative metal benches are also available as a complementary curved bench. Circular benches are measured by inner radius and arc angle. Slat size is variable. Minimum slat number is five. All circular benches are also available as a complementary straight bench.
** NOTE TO SPECIFIER ** Our standard circular bench is a perfect solution to some inescapable obstacles. It allows designers to use creative solutions when working within challenging surroundings.

2.3.1 Y- Series

2.3.1.1 Standard Circular YF

2.3.1.1.1 Size:

** NOTE TO SPECIFIER ** Circular benches are measured by inner radius and arc angle. Slat size is variable. Minimum slat number is five. Insert inner radius and arch angle required.

2.3.1.1.1.1 ___ inner radius

2.3.1.1.1.2 ___ arc angle

2.3.1.1.1.3 Custom inner radius and arc angle as indicated on the Drawing

2.3.1.1.2 Nominal Slat Size:

2.3.1.1.2.1 2 inch by 3 inch.

2.3.1.1.3 Material:

** NOTE TO SPECIFIER ** Select the Wood or Greenwood and Metal materials and colors required from the following paragraphs and delete those not required.

2.3.1.1.3.1 Wood

2.3.1.1.3.1.1 Standard Colors

2.3.1.1.3.2 Greenwood

2.3.1.1.3.2.1 Standard Colors

2.3.1.1.3.2.2 Custom Colors

2.3.1.1.3.3 Metal

2.3.1.1.3.3.1 Powder Coat Standard Colors

2.3.1.1.3.3.2 Powder Coat Custom Colors

2.3.1.1.3.3.3 Powder Coat Antique Colors

2.3.1.1.4 Mounts:

** NOTE TO SPECIFIER ** Select the mount type required and delete those not required.

2.3.1.1.4.1 Freestanding

2.3.1.1.4.2 Surface

2.3.1.1.4.3 Embedded

2.3.1.1.4.4 Subslab

2.3.1.1.4.5 Cantilever

** NOTE TO SPECIFIER ** Available as a complementary straight bench in standard sizes or custom lengths. Select the size required and delete those not required.

2.3.1.1.5 Complementary straight bench length:

2.3.1.1.5.1 5 foot

2.3.1.1.5.2 6 foot

2.3.1.1.5.3 7 foot

2.3.1.1.5.4 8 foot

2.3.1.1.5.5 Custom lengths as indicated on the Drawing

2.3.1.2 Circular Laminated YL

2.3.1.2.1 Size:

** NOTE TO SPECIFIER ** Circular benches are measured by inner radius and arc angle. Slat size is variable. Minimum slat number is five. Insert inner radius and arch angle required.

2.3.1.2.1.1 ___ inner radius

2.3.1.2.1.2 ___ arc angle

2.3.1.2.1.3 Custom inner radius and arc angle as indicated on the Drawing

2.3.1.2.2 Nominal Slat Size:

2.3.1.2.2.1 2 inch by 3 inch.

2.3.1.2.3 Material:

** NOTE TO SPECIFIER ** Select the Wood or Greenwood and Metal materials and colors required from the following paragraphs and delete those not required.

2.3.1.2.3.1 Wood

2.3.1.2.3.1.1 Standard Colors

2.3.1.2.3.2 Greenwood

2.3.1.2.3.2.1 Standard Colors

2.3.1.2.3.2.2 Custom Colors

2.3.1.2.3.3 Metal

2.3.1.2.3.3.1 Powder Coat Standard Colors

2.3.1.2.3.3.2 Powder Coat Custom Colors

2.3.1.2.3.3.3 Powder Coat Antique Colors

2.3.1.2.4 Mounts:

** NOTE TO SPECIFIER ** Select the mount type required and delete those not required.

2.3.1.2.4.1 Freestanding

2.3.1.2.4.2 Surface

2.3.1.2.4.3 Embedded

2.3.1.2.4.4 Subslab

2.3.1.2.4.5 Cantilever

** NOTE TO SPECIFIER ** Available as a complementary straight bench in standard sizes or custom lengths. Select the size required and delete those not required.

2.3.1.2.5 Complementary straight bench length:

2.3.1.2.5.1 5 foot

2.3.1.2.5.2 6 foot

2.3.1.2.5.3 7 foot

2.3.1.2.5.4 8 foot

2.3.1.2.5.5 Custom lengths as indicated on the Drawing

2.3.1.3 Circular with Back YB

2.3.1.3.1 Size:

** NOTE TO SPECIFIER ** Circular benches are measured by inner radius and arc angle. Slat size is variable. Minimum slat number is five. Insert inner radius and arch angle required.

2.3.1.3.1.1 ___ inner radius

2.3.1.3.1.2 ___ arc angle

2.3.1.3.1.3 Custom inner radius and arc angle as indicated on the Drawing

2.3.1.3.2 Nominal Slat Size:

2.3.1.3.2.1 2 inch by 3 inch.

2.3.1.3.3 Material:

** NOTE TO SPECIFIER ** Select the Wood or Greenwood and Metal materials and colors required from the following paragraphs and delete those not required.

2.3.1.3.3.1 Wood

2.3.1.3.3.1.1 Standard Colors

2.3.1.3.3.2 Greenwood

2.3.1.3.3.2.1 Standard Colors

2.3.1.3.3.2.2 Custom Colors

2.3.1.3.3.3 Metal

2.3.1.3.3.3.1 Powder Coat Standard Colors

2.3.1.3.3.3.2 Powder Coat Custom Colors

2.3.1.3.3.3.3 Powder Coat Antique Colors

2.3.1.3.4 Mounts:

** NOTE TO SPECIFIER ** Select the mount type required and delete those not required.

2.3.1.3.4.1 Freestanding

2.3.1.3.4.2 Surface

2.3.1.3.4.3 Embedded

2.3.1.3.4.4 Subslab

2.3.1.3.4.5 Cantilever

** NOTE TO SPECIFIER ** Available as a complementary straight bench in standard sizes or custom lengths. Select the size required and delete those not required.

2.3.1.3.5 Complementary straight bench length:

2.3.1.3.5.1 5 foot

2.3.1.3.5.2 6 foot

2.3.1.3.5.3 7 foot

2.3.1.3.5.4 8 foot

2.3.1.3.5.5 Custom lengths as indicated on the Drawing

** NOTE TO SPECIFIER ** The B-Series is a favorite among many schools and playgrounds for its high traffic durable slat size and warmth of wood. This series withstands abuse while its simple contoured profile adds flair and style to any environment.

2.3.2 B-Series

2.3.2.1 Model:

** NOTE TO SPECIFIER ** Select the Model(s) required and delete those not required.

2.3.2.1.1 BKS - Profile

2.3.2.1.2 BKB - Crescent

2.3.2.1.3 BKF - Woodcrest

2.3.2.2 Length:

** NOTE TO SPECIFIER ** Select the size required and delete those not required.

2.3.2.2.1 5 foot

2.3.2.2.2 6 foot

2.3.2.2.3 7 foot

2.3.2.2.4 8 foot

2.3.2.2.5 Custom lengths as indicated on the Drawing

2.3.2.3 Nominal Slat Size:

2.3.2.3.1 2 inch by 3 inch.

2.3.2.4 Material:

** NOTE TO SPECIFIER ** Select the Wood or Greenwood and Metal materials and colors required from the following paragraphs and delete those not required.

2.3.2.4.1 Wood

2.3.2.4.1.1 Standard Colors

2.3.2.4.2 Greenwood

2.3.2.4.2.1 Standard Colors

2.3.2.4.2.2 Custom Colors

2.3.2.4.3 Metal

2.3.2.4.3.1 Powder Coat Standard Colors

2.3.2.4.3.2 Powder Coat Custom Colors

2.3.2.4.3.3 Powder Coat Antique Colors

2.3.2.5 Mounts:

** NOTE TO SPECIFIER ** Select the mount type required and delete those not required.

2.3.2.5.1 Freestanding

2.3.2.5.2 Surface

2.3.2.5.3 Embedded

2.3.2.5.4 Subslab

2.3.2.5.5 Cantilever

** NOTE TO SPECIFIER ** Nothing warms up a site and the people who use it like the natural beauty of wood furnishings, especially durable, graceful furnishings from Sitecraft. The T-Series has a thin slat size for a truly elegant series.

2.3.3 T-Series

2.3.3.1 Model:

** NOTE TO SPECIFIER ** Select the Model(s) required and delete those not required.

2.3.3.1.1 T-100

2.3.3.1.2 T-200

2.3.3.1.3 T-300

2.3.3.1.4 R-400S

2.3.3.1.5 T-400D

2.3.3.2 Length:

** NOTE TO SPECIFIER ** Select the size required and delete those not required.

2.3.3.2.1 5 foot

2.3.3.2.2 6 foot

2.3.3.2.3 7 foot