SECTION 10 28 00 - Toilet, Bath, and Laundry Accessories

TOILET, BATH AND LAUNDRY ACCESSORIES

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** Hafele America Co.; HEWI toilet and bath accessories.
.
This section is based on the products of Hafele America Co., which is located at:
3901 Cheyenne Dr. P.O. Box 4000
Archdale, NC 27263
Toll Free Tel: 888-437-7477
Tel: 336-434-8136
Fax: 336-434-8159
Email: request info ()
Web: www.hafele.com/us
[ Click Here ] for additional information.
.
Hafele was founded in 1923 and has built a reputation for high quality products and great service. Also, true to its name, HEWI nylon products integrate engineered design to coordinate with today's bathroom. HEWI offers high quality materials in many distinctive colors. Functional precision is guaranteed with modern styling and convenience. Solid quality nylon merges aesthetics with durability in humid conditions.
.
Hafele Headquarters is located in Archdale, NC. Service Centers are located in New York, NY, Chicago, IL, Los Angeles, CA, and San Francisco, CA, and ships worldwide.

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete any items below not applicable to project.

A. Towel bars and holders.

B. Soap dishes, tumblers and containers.

C. Dispensers and waste baskets.

D. Shelves and cabinets.

E. Toilet paper holders.

F. Toilet brush units.

G. Grab bars and supports.

H. Shower and tub seats.

I. Shower rods.

J. Hooks.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete sections below not relevant to this project; add others as required.

A. Section 06 10 00 - Rough Carpentry.

B. Section 08 83 00 - Mirrors.

C. Section 09 30 00 - Tiling.

D. Section 10 21 13.13 - Metal Toilet Compartments.

E. Section 10 21 13.16 - Plastic-Laminate-Clad Toilet Compartments.

F. Section 10 21 13.16 - Plastic-Laminate-Clad Toilet Compartments.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section; add others as required.

A. ASTM F 446 - Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area; 1985 (Reapproved 1999).

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer's standard catalog data for each product specified, including dimensions, finish information, details of function, and mounting details.

C. Selection Samples: Manufacturer's standard color fans for selection of colors and finishes.

D. Verification Samples: Submit samples of each product specified, illustrating color and finish.

1. Approved samples will be returned to the Contractor and may be used in the project.

E. Shop Drawings:

1. Locate each specified unit in project.

2. Indicate mounting height of each unit.

3. Include anchoring and fastening details.

F. Installation Instructions: Manufacturer's printed installation instructions.

1.5 DELIVERY, STORAGE, AND HANDLING

A. Comply with manufacturer's ordering instructions and lead time requirements to avoid construction delays.

B. Store products in manufacturer's unopened packaging until ready for installation.

1.6 COORDINATION AND SEQUENCING

A. Coordinate installation of blocking, bracing and backing to receive products of this section.

B. Supply installation templates, required reinforcing, and recessed anchorage devices in timely fashion to installers of related work that will receive products of this section.

** NOTE TO SPECIFIER ** Delete the following article if no warranties are required or if work is covered under the terms of a general project warranty specified elsewhere.

1.7 WARRANTY

A. See Section 01 78 23.19 - Preventative Maintenance Instructions.

B. Provide manufacturer's standard replacement warranty against defects in materials and workmanship.

PART 2 PRODUCTS

2.1 MANUFACTURER

A. Acceptable Manufacturer: Hafele America Co., which is located at: 3901 Cheyenne Dr. P.O. Box 4000 ; Archdale, NC 27263; Toll Free Tel: 888-437-7477; Tel: 336-434-8136; Fax: 336-434-8159; Email: request info (); Web: www.hafele.com/us

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 TOWEL BARS AND HOLDERS

** NOTE TO SPECIFIER ** Delete from the following list the towel bars and holders not required on the Project. If more than one type is required, edit text to identify locations for each unique combination, add a schedule to the end of this section, or place a schedule on the drawings.

A. Basic Requirements: Comply with ASTM F 446.

B. Towel Bar: Nylon, round, 1-1/8 inch (28 mm) diameter, 3-1/8 inches (80 mm) from wall, with concealed fasteners. Color as selected from manufacturer's standard range, Size as follows:

** NOTE TO SPECIFIER ** Delete sizes not required. If more than one is required, edit text to identify locations for each, or add a schedule to the end of this section, or on the drawings.

1. No. 988.40.1..: Size 10-15/16 inches (278 mm) long.

2. No. 988.40.2..: Size 19-1/8 inches (485 mm) long.

3. No. 988.40.3..: Size 23-1/4 inches (600 mm) long.

C. Towel Bar: Nylon, round, 1-1/8 inch (28 mm) diameter, 3-3/8 inches (85 mm) from wall, with flanges, snap on covers and concealed fasteners. Color as selected from manufacturer's standard range, Size as follows:

** NOTE TO SPECIFIER ** Delete sizes not required. If more than one is required, edit text to identify locations for each, or add a schedule to the end of this section, or on the drawings.

1. No. 988.40.5..: Size 12-3/16 inches (310 mm) long.

2. No. 988.40.6..: Size 20-3/8 inches (517 mm) long.

3. No. 988.40.7..: Size 24-13/16 inches (630 mm) long.

D. Towel Ring: No. 988.47.1..: Nylon, round, with set point 30 degree angle from wall and with concealed fasteners. Color as selected from manufacturer's standard range,

E. Towel Holder with Double Hook (LifeSystem): No. 988.42.4..: Rail/Backplate, aluminum; Hooks, Nylon, color as selected from the manufacturer's standard range. 16 inches (407 mm) by 9-3/16 inches (238 mm) by 1 inch (25 mm) diameter.

F. Towel Holder with Walking Aid Holder (LifeSystem): No. 988.42.5..: Rail/Backplate, aluminum; Hooks, Nylon, color as selected from the manufacturer's standard range. 16 inches (407 mm) by 8-5/16 inches (220 mm) by 2 inches (51 mm) diameter.

G. Walking Aid Holder (LifeSystem): No. 988.83.8..: Backplate, aluminum; Hooks, Nylon, color as selected from the manufacturer's standard range. 14-3/4 inches (375 mm) by 5-7/8 inches (148 mm) by 2-1/4 inch (58 mm). Right hand or left hand application.

H. Hook Rail with Two Double Hooks (LifeSystem): No. 988.83.9..: Backplate, aluminum; Hooks, Nylon, color as selected from the manufacturer's standard range. 14-3/4 inches (375 mm) by 8-5/8 inches (220 mm) by 2-1/4 inch (58 mm). Right hand or left hand application.

2.3 SOAP DISHES, TUMBLERS AND CONTAINERS

** NOTE TO SPECIFIER ** Delete from the following list the soap dishes tumblers and containers not required on the Project. If more than one type is required, edit text to identify locations for each unique combination, add a schedule to the end of this section, or place a schedule on the Drawings.

A. Soap Dish: No. 988.05.2..: Nylon, 3-13/16 inches (97 mm) wide and 3-15/16 (100 mm) deep, with textured surface and with concealed fasteners. Color as selected from manufacturer's standard range.

B. Tumbler with Holder: No. 988.07.4..: Nylon, 3-13/16 inches (97 mm) wide and 3-15/16 (100 mm) deep, with concealed fasteners. Color as selected from manufacturer's standard range.

C. Tumbler Holder: No. 988.09.1..: Nylon, 3-13/16 inches (97 mm) wide and 3-15/16 (100 mm) deep, with concealed fasteners. Color as selected from manufacturer's standard range.

D. Tumbler: No. 988.21.4..: Nylon, 2-15/16 inches (74 mm) diameter and 3-1/8 (80 mm) high. Color as selected from manufacturer's standard range.

E. Dish Soap Holder: No. 988.09.2..: Synthetic, transparent, 5-9/16 inches (141 mm) diameter by 5-1/2 inches (140 mm) by 1 inch (25 mm). Color as selected from the manufacturer's standard range.

2.4 DISPENSERS AND WASTE BASKETS

** NOTE TO SPECIFIER ** Delete from the following list dispensers and waste baskets not required on the Project. If more than one type is required, edit text to identify locations for each unique combination, add a schedule to the end of this section, or place a schedule on the drawings.

A. Soap Dispenser: Nylon, 8-3/16 inches (207 mm) by 2-15/16 (75 mm) diameter. Color as selected from manufacturer's standard range. Capacity 16.9 oz (500ml).

1. No. 988.03.3.. (opaque white container/lid).

B. Paper Towel Dispenser: Nylon, 15-3/4 inches (400 mm) by 11-13/16 (300 mm) by 5-1/2 inches (140 mm). Wall mounted. Color as selected from manufacturer's standard range. Capacity 16.9 oz (500ml).

1. No. 988.90.5.. (opaque white hood).

C. Rectangular Waste Basket: Container perforated metal, decorative trim, Nylon, 20-5/16 inches (515 mm) by 12 inches (305 mm by 11-13/16 inches (300 mm). Free standing or wall mounted with removable decorative trim. Color as selected from manufacturer's standard range.

1. No. 988.99.1.. (black container).

2. No. 988.99.2.. (white container).

D. Cylindrical Waste Basket: No. 988.99.0.. Nylon, 13 inches (330 mm) by 7-1/8 inches (180 mm) diameter by 8-1/4 inches (210 mm). Hinged lid opens with slight pressure with knee or hand. Color as selected from manufacturer's standard range.

2.5 SHELVES AND CABINETS

** NOTE TO SPECIFIER ** Delete from the following list shelves and cabinets not required on the Project. If more than one type is required, edit text to identify locations for each unique combination, add a schedule to the end of this section, or place a schedule on the drawings.

A. Shelf: No. 988.26.1..: Nylon, 23-5/8 inches (600 mm) wide and 5-1/2 inches (140 mm) deep, with concealed fasteners. Color as selected from manufacturer's standard range.

B. Corner Shelf: No. 988.26.9..: Nylon, 8-1/16 inches (205 mm) wide and 8-1/16 inches (205 mm) deep, with removable dish and concealed fasteners. Color as selected from manufacturer's standard range.

C. Shelf with Grips: No. 988.37.7..: Frame, chrome-plated aluminum. Grips, encased with a Nylon layer. Shelf, synthetic plastic, white matt. 28 inches (710 mm) by 5-15/16 inches (151 mm) by 8-11/16 inches (220 mm). Color as selected from manufacturer's standard range.

D. Multi Purpose Shelf: No. 988.37.8..: Frame, chrome-plated aluminum. Support Rail, chrome plated steel encased with a Nylon layer. Shelf, synthetic plastic, white matt. Hooks, nylon. 28 inches (710 mm) by 19-5/16 inches (490 mm) by 6-1/4 inches (159 mm). Color as selected from manufacturer's standard range.

E. All Purpose Box: No. 988.25.4.. Frame, chrome-plated aluminum. Cabinet body, powder coated aluminum. Drawer support rail, Nylon, 30-1/2 inches (776 mm) by 19-15/16 inches (490 mm) by 6-7/8 inches (173 mm). Includes support rail, two locking boxes and two non-locking boxes. Color as selected from manufacturer's standard range.

F. Multi Purpose Cabinet: No. 988.25.5.. Frame, chrome-plated aluminum. Cabinet body, powder coated aluminum. Cabinet front/Support rail, Nylon, 30-1/2 inches (776 mm) by 19-15/16 inches (490 mm) by 6-7/8 inches (173 mm). Includes support rail, two compartments and a middle shelf all lockable. Color as selected from manufacturer's standard range.

2.6 MISCELLANOUS TOILET ACCESSORIES

** NOTE TO SPECIFIER ** Delete from the following list soap dishes and tumblers not required on the Project. If more than one type is required, edit text to identify locations for each unique combination, add a schedule to the end of this section, or place a schedule on the drawings.

A. Toilet Tissue Holder: No. 988.80.4..: Nylon, 6-5/16 inches (160 mm) wide and 4-3/4 (120 mm) deep, with concealed fasteners. Color as selected from manufacturer's standard range.

B. Toilet Tissue Holder: No. 988.80.5..: Nylon, 6-5/16 inches (160 mm) wide and 4-3/4 (120 mm) deep, with theft proof feature and concealed fasteners. Color as selected from manufacturer's standard range.

C. Key for Toilet Tissue Holder: No. 988.80.633: Nylon, for use with Toilet Tissue Holder: No. 988.80.5 with theft proof feature.

D. Toilet Brush: No. 988.81.9..: Nylon. Color as selected from manufacturer's standard range.

E. Toilet Brush Unit: No. 988.81.2..: Nylon, holder with container and brush. Color as selected from manufacturer's standard range.

F. Toilet Brush, Long: No. 988.82.0..: Nylon, 21-25/32 inches (533 mm) long handle. Color as selected from manufacturer's standard range.

G. Toilet Brush Unit, Long: No. 988.81.8..: Nylon, holder with container and brush. Wall mounted. Color as selected from manufacturer's standard range.

H. Spare Toilet Brush Head: No. 988.82.790, black. (used with No. 988.82.0.. and 988.81.9..).

2.7 GRAB BARS AND SUPPORTS

** NOTE TO SPECIFIER ** Delete from the following list grab bars not required on the Project. If more than one type is required, edit text to identify locations for each unique combination, add a schedule to the end of this section, or place a schedule on the drawings.

A. Basic Requirements: Comply with ASTM F 446 and ADA guidelines to withstand 300 lbs (1335 N) of loading.

B. Grab Bar: All-around corrosion resistant steel core encased with a 4 mm thick nylon tube, round, 1-5/16 inch (33 mm) diameter, 1-1/2 inches (38 mm) clear space to wall, with flanges concealing fasteners. Color as selected from manufacturer's standard range, Size as follows:

** NOTE TO SPECIFIER ** Delete sizes not required. If more than one is required, edit text to identify locations for each, or add a schedule to the end of this section, or on the drawings. Custom sizes are available contact manufacturer for availability.

1. No. 988.61.0..: Size 12 inches (305 mm) long.

2. No. 988.58.0..: Size 16 inches (406 mm) long.

3. No. 988.61.1..: Size 18 inches (457 mm) long.