Changes in the program version 12.0 compared with the 11.0 program version

1. Important! Instead of roller shutter parameter “Roller shutter installation” the parameter “Lock and other devices installation” is used (s. Help). Please be attentive!

2. New option for calculation of roller shutters with mosquito-net is added (unlocked).

3. When re-calculating a previously calculated roller shutter and pressing the button “Cancel” in the calculation box, the previously generated roller shutter specification is not deleted.

4. When re-calculating a previously calculated roller shutter, a (usually) yellow stripe indicating the article and colour of the previously selected component will appear under the table. Moreover, in the table of components all the components with indicated article are typed bold.

5. New extruded roller shutter profile “AER55m/S” has been included in the program version.

6. New side lock “SP55m/S” has been included in the program version.

7. New entry guides “GD9/C”, “GD9/W”, “GD14/C” and “GD14/W” have been included in the program version.

8. It is allowed to choose the “GD14” entry guide only if shutter boxes “SB45/250” and “SB45/300” are used.

9. New tubular electric motors “NM1-PP/20-16”, “NM1-PP/30-16”, “NM1-PP/40-12” and “NM1-PP/50-12” have been included in the program version.

10. New tubular electric motors “E M 817”, “E M 1517”, “E M 3017”, “E M 4012” and “E M 5012” have been included in the program version.

11. New tubular electric motors “E MH 1517”, “E MH 3017”, “E MH 4012” and “E MH 5012” have been included in the program version.

12. New tubular electric motors “Solus 2 PA 8/12”, “Solus 2 PA 30/12” and “Solus 2 PA 40/12” have been included in the program version.

13. New motor bracket “KM/EMH” has been included in the program version.

14. New assist and push-up springs “4SIM04/8” have been included in the program version.

15. New half-round plug “GRC53” has been included in the program version.

16. New guide rail end piece “GRC53T” has been included in the program version.

17. New guide rail end piece “GRC53B” has been included in the program version.

18. New clamp “GRX53” has been included in the program version.

19. New mini-transmitters “Radio 8101-2M“, “Radio 8101-4M“, "Intro II 8501-2M" and "Intro II 8501-4M" have been included in the program version.

20. New radio transmitters “Telis 16 RTS Pure“, “Telis 16 RTS Silver“, “Telis 6 Chronis RTS Pure“ and “Telis 6 Chronis RTS Silver“ have been included in the program version.

21. New end slat “M-ES12x57” has been included in the program version.

22. New bracket “M-SBR” has been included in the program version.

23. New tube with curtain “M-TNR-2,5” has been included in the program version.

24. New brush insert “ISE18” has been included in the program version.

25. New guide rail end piece “M-GRP53” has been included in the program version.

26. New braking device “M-BRS” has been included in the program version.

27. New mosquito-net locking mechanism “M-NLM” has been included in the program version.

28. Guide rails “M-GR53x39IE” in colours “119”, “149” and “159” have been included in the program version.

29. Shutter boxes “SB-QR/137”, “SB-QR/150”, “SB-QR/165”, “SB-QR/180”, “SB-QR/205”, “SB-R/137”, “SB-R/150”, “SB-R/165”, “SB-R/180” and “SB-R/205” in colour “213” (anthracite, gloss) have been included in the program version.

30. New safety plates “GPU*“ have been included in the program version. It is forbidden to choose the “GP*“ safety plates (they have been included in the program before) when calculating roller shutters (they can be included in the roller shutter specification only manually).

31. New option has been included in the program version – "When calculating roller shutters "GP*" safety plates are to be used“, which enables/disables the usage of "GP*" safety plates when calculating roller shutters (s. part “Parameters”).

32. The format of the xml-file for export and import of the roller shutter orders has been changed: the attribute "Ext_Montage" determines the roller shutter parameter “Lock and other devices installation”, but not the “Roller shutter installation” as before (s. Help, part: “Annex. Format description of xml-file for export and import of roller shutter orders”).

33. The format of the xml-file for export and import of the roller shutter orders has been changed: new tag “Roll_Objects“ is added (for internal usage).

34. The format of the xml-file for export and import of the roller shutter orders has been changed: new attribute “Repair_Id” is added (for internal usage

35. The format of the xml-file for export and import of the roller shutter orders has been changed: new attribute “ Color_” is added (roller shutter colour code).

36. The calculation algorithm of SP* side locks quantity has been changed. If the KPU*/R joint profile is used, the quantity of side locks SP* will be 2 pieces more.

37. When calculating roller shutter with 70 mm tube it is allowed to select the “Solus 2 PA 6/12“, “Solus 2 PA 10/12“, “Solus 2 PA 15/12“ or “Solus 2 PA 20/12“ (these motors were not available with the 70 mm tube before).

38. For all pulleys the additional parameter "lifting capacity" is added, which is considered when calculating roller shutter.

39. When calculating roller shutter with the "AL" automatic locking device it is forbidden to select the ”SPT9E” stopper..

40. В диалоговом окне выбора комплектующих (отображается при расчете роллеты) для секции “Шины направляющие” изменен порядок отображения направляющих шин.

41. When calculating roller shutter the “SF360” end cap is higher priority than the “SF360/S” end cap.

42. When calculating roller shutter the “KPU37/R” or “KPU45/R” joint profile is higher priority than the “KPU/R” joint profile.

43. When calculating roller shutter with “NHK Electric motor” or “Electric motor” motor type while selecting a 40 mm tube and the ”KU40” adjustable cap or the ”BBC40” bearing cap the tube will be 5 mm shorter.

44. When calculating roller shutter with “NHK Electric motor” motor type while selecting a 60 mm tube, the “SF250a” or “SF300a” cap and the “APB60*” adjustable cap the tube will be 10 mm shorter.

45. When calculating roller shutter with “NHK Electric motor” motor type while selecting a 70 mm tube and the “SF250a” or “SF300a” cap the tube will be 15 mm shorter.

46. When calculating roller shutter with “NHK Electric motor” motor type while selecting a 102 mm tube and the “SF250a” or “SF300a” cap the tube will be 10 mm shorter.

47. When calculating roller shutter with “Combined, individual control” roller shutter combining type while selecting the “Cord” motor type the tube will be 5 mm shorter.

48. When calculating roller shutter it is forbidden to select the “SB360/C” and “SB405/C” shutter boxes (instead of them the “SB45/360” and “SB45/405” shutter boxes are to be selected, respectively).

49. When calculating roller shutter, the software allows selecting the eye for “NM2-PP/60-12”, “NM2-PP/80-12”, “NM2-PP/100-12” or “NM2-PP/140-8” tubular electric motors, if the eye from the kit does not fit by length.

50. When calculating roller shutter it is allowed to select the “ES/P*” end slats only if the value of the parameter “Lock and other devices installation side…“ is “From shutter box side” (before, it was vice-versa).

51. For combined systems the "ES/P*" end slats length calculation error has been corrected.

52. When calculating roller shutter with the “AR/39“ and “AR/39N“ profiles, it is allowed to select the “GR60x21/S“ guide rail (this guide rail was not available before).

53. When calculating roller shutters with the standard “AER44/S” profile, it is forbidden to select the GR45* guide rails.

54. When calculating roller shutter with the standard “AER42” profile, it is forbidden to select the “NHK Electric motor”.

55. When calculating roller shutter with the standard “AER42” profile, it is forbidden to select the shutter box types "Round", "Extruded round" and "Built-in".

56. For the “AR/555” and “AR/555N” profile the curtain winding parameters on the 102 mm tube for the 230, 250, 300, 360 and 405 mm shutter box for roller shutters with suspension type “ret. spring + ring” have been added.

57. For the “AER55/S”, “AR/55”, “AR/55N”, “ARH/55”, “ARH/55N” profile the curtain winding parameters on the 102 mm tube for the 405 mm shutter box for roller shutters with suspension type “retainer profile” and “ret. spring + ring” have been added.

58. For the “AER55/S” profile the curtain winding parameters on the 108 mm tube for the 360 mm shutter box for roller shutters with suspension type “retainer profile” and “retainer spring + ring” have been added.

59. When calculating roller shutter with the “AR/555“ and “AR/555N“ profiles, it is allowed to select the “RT102x2.5“ tube (this tube was not available before).

60. When calculating roller shutter with the “RT108x3,6” tube, it is forbidden to select the “RC360/C” movable carriage.

61. When calculating roller shutter with the “AEG84” standard profile and the “RT108x3,6” tube, it is forbidden to select the “CCM“ console (as well as the SB360/C and SB405/C shutter boxes).

62. When calculating roller shutter, the selection of the “RTS Receiver DC“ radio control allows selecting the “Keytis 2RTS“ and ”Keytis 4RTS” remote controls.

63. The supplementary wind load standard “GOST” has been added (see “Parameters” dialog, tab “Calculation”).

64. When calculating roller shutter parameter “Wind zone”, the software takes into consideration not only the type of standard profile and the roller shutter width, but also the components selected while calculating the roller shutter (see Help).

65. The “wind loads“ have been determined for following profiles: “AER44/S“ и “AER55/S“.

66. In the “Parameters” dialog, in the tab “Others” the new parameter “Display the column "Qty in stock"”.

67. The electric motors “Ceres8/12”, “Meteor20/12”, “NM65000SA”, “NM90000SA”, “NR0/08-16” and “NZ/1/20-WK” have been removed.

68. When calculating roller shutters it is forbidden to select the “NM1/20-16”, “NM1/30-16”, “NM1/40-12”, “NM1/50-12”, “NZ/0/10-W”, “NZ/1/10-WK”, “NZ/1/15-WK”, “NZ/1/30-WK”, “NZ/1/40-WK” and “NZ/1/50-WK” electric motors (they can only be added to the roller shutter specification manually).

69. When calculating roller shutters it is forbidden to select the “GR45x22/eco“, “GR45x22B/eco“, “GR45x22B17/eco“, “GR45x22I/eco“ and “GR45x22I24/eco“ guide rails (they can only be added to the roller shutter specification manually).

70. The “Impressario Chronis RTS Lounge“ and "Impressario Chronis RTS Silver" remote controls have been removed.

71. The “Nero 8013”, “Nero ll 8713-50” and “Nero 8014” radio controls have been removed.

72. The “Radio 8103-50” wall-mounted transmitter has been removed.

73. The “Radio 8151-50” radio timer has been removed.

74. The “Radio 8113-50” radio control has been removed.

75. The “Radio 8105-50-6” scenario switch has been removed.

76. The “Radio 8105-50-8” scenario switch has been removed.

77. The “ECU-3” and “ECU-4.1ML/A-5” electronic control devices have been removed.

78. The “ECC” electronic plastic card has been removed.

79. The “M-GP40/150“, “M-GP60/165“, “M-GP60/180“ and “M-GP60/205“ safety plates have been removed.

80. The “M-PV” clutch, the “M-HD” handle, the “M-SP” side lock and the “M-ST” stopper have been removed.

81. The “ES/P14” и “ES/P9” end slats with colours 119, 149 and 159 have been removed.

82. Errors found have been corrected.

1