PACER
TECHNOLOGY PRODUCT: PRO SEAL HEAVY DUTY GASKET REMOVER
PRODUCT DATA SHEET
Pacer Technology’s Pro Seal Heavy Duty Gasket Remover is formulated to remove baked-on gaskets of all types. This industrial strength product also works to soften cements, sealants, adhesives, silicones, weatherstrip adhesives, dried oil, grease and paint for easy removal. Using Heavy Duty Gasket Remover will prevent damage to flanges.
PROPERTIES
Base Chemical Methylene Chloride
Flashpoint, TCC0F (TCC0C) Propellent <200F (-70C)
Specific Gravity 0.9
Color Off-white foam with an ammonia odor.
DIRECTIONS FOR USE
Shake can well. Protect all rubber, plastic, painted, fiberglass or any synthetic-type surfaces from over-spray. Hold can upright and spray a moderate to heavy coating. The heavier the application the better. DO NOT USE in direct sun or spray on a hot surface or use in a windy area. Allow product to penetrate material to be removed. Watch for signs of penetration: SOFTENING - approximately 10 minutes; BLISTERING - approximately 20 to 30 minutes. When action is completed, scrape off with a flexible putty knife or squeegee. A second application may be necessary for complete removal. Rinse thoroughly with water or solvent wash. Allow surface to dry before applying new finish or gasket. Before use on other surfaces, first test for suitability. User accepts all responsibility for such use. FOR PROFESSIONAL AND INDUSTRIAL USE ONLY.
STORAGE AND SHELF LIFE
Store product in a cool, dry location. Stored under these conditions, a one year shelf life can be expected.
PACER
TECHNOLOGY 9420 Santa Anita Ave., Rancho Cucamonga, CA 91730
(909) 987-0550 (800) 538-3091 FAX (909) 987-0490
PRODUCT DATA SHEET
HEAVY DUTY GASKET REMOVER Page 2 or 2
SAFETY AND HANDLING PRECAUTIONS
Extremely flammable. Do not spray near heat, sparks or open flame. Vapor harmful. Use in well ventilated area. Possible risks of irreversible effects. Harmful if swallowed. If swallowed, do not induce vomiting. contact physician immediately. Avoid contact with skin and eyes. In case of eye contact flush thoroughly with plenty of water for 15 minutes and get medical attention.
For more information, refer to Material Safety Data Sheet available upon request. In case of emergency, call CHEMTREC at (800) 424-9300 or call Pacer Technology (800) 637-9803 (outside CA only) or (909) 987-0550.
PRODUCT: N80804
Rev. 1 – 4/03mkr
The data contained herein is furnished for descriptive purposes only and is believed to be reliable. Users of any products described in the data sheet have the responsibility to determine the suitability for their particular use thereof, and Pacer relies upon such users to adopt all necessary precautions to ensure the protection of property and persons against hazards involved in the use thereof.
Pacer Technology specifically makes no warranty, representation, or condition of any nature, kind or character, whether express or implied, including, but not limited to, warranties or merchantability or fitness for a particular purpose arising from the sales or use of products described in this data sheet, and none shall be implied by law. Pacer Technology specifically disclaims any liability for consequential or incidental damage of any kind, including lost profit.
PACER
TECHNOLOGY 9420 Santa Anita Ave., Rancho Cucamonga, CA 91730
(909) 987-0550 (800) 538-3091 FAX (909) 987-0490