Toll Free (800) 873-0456
www.argus-hazcofire.com
Scott Safety Field Specialist Level Maintenance Class
Thank you for your interest in signing up for our Scott Air-Pak 50/Air-Pak 75 field level maintenance course. Our trainers are very knowledgeable and have years of experience and expertise, and we are dedicated to providing you with the required instruction and hands on training necessary to maintain your Scott SCBA equipment. The following is the field level maintenance class information:
Date of Class: October 25, 2014
Time of Class: 8:00 am – 12:00 pm
Location: Berrien Springs-Oronoko Twp Fire Dept.
4411 E. Snow Rd.
Berrien Springs, MI 49103
Cost: Free for one Fire Fighter per Berrien County Fire Department
$35.00 per additional Fire Fighter
(Class size is limited to 28)
· This field maintenance course covers the basic repairs of the 2.2, 3.0, and 4.5
Air-Pak 50/75 regulator, harness assembly, AV-2000/3000 facepieces, and cylinder valve.
· Please bring one of your own Scott 2.2, 3.0, or 4.5 Air-Pak 50/75 for hands on training. However, if this is not possible; Argus-Hazco will have a limited number of units available on a first come first serve basis.
· Please bring your own set of tools. A comprehensive and field level maintenance suggested tools list is attached. If you would like to purchase a Scott Tool Kit for Argus-Hazco contact us at (800) 873-0456.
· If sending more than one Firefighter, there is a class registration fee of $35.00 per Firefighter. Payment must be received on or before the class date by check. Make checks payable to: Berrien County Fire Fighters Training Committee.
Course Registration Form
Course:______Date______
Company Name:______Phone #______
Attendee List:
Cost per Attendee:______Total Due:______
Comprehensive list of tools required for Scott 2.2/4.5/Fifty repair services:
• Open End Wrenches: 5/8” & ½” • #2 Phillips Screwdriver
• Allen Wrenches: 3/32”, 3/16”, 7/64”, & 1/8” • 1/8” Small Flat Blade Screwdriver
• Pin Punches: 5/64” & 1/8” • 3/16” Medium Flat Blade Screwdriver • ¼” Medium Flat Blade Screwdriver • Nut Drivers: 3/8” & 5/16”
• Standard Pliers • Ratchet Style Wrench Socket: 3/8”
• Needle Nose Pliers • 10” Adjustable Wrench • 1” Crowfoot Wrench • Lightweight Hammer (6-8oz) • Toothbrush (Metal Bristles) • 25” pound Minimum Capacity Torque Wrench
• Torque Wrench (25’-115’ Pound Capacity) • Scott Valve Installation Tool
(With a #2 Phillips Screwdriver Bit Socket)
Note: Tools required for the field level maintenance course are underlined. Please be prepared to provide you own tools for the course.
Please send registration forms to: BCFFTC, P.O. Box 214, Berrien Springs, MI 49103 or email to: Corey Burks,
Any questions, please contact Corey Burks at 269-363-1316