EM78P569QTP Ordering Form

EM78P569QTP Ordering Form

U8569A -______

Company

Program file / .cds / Checksum
Order Quantity / Delivery date
Project Name / Project No.
Project description:
Code Option
VERSEL / Version select / □VERSEL=0
□VERSEL=1
VERSEL = 0 / VERSEL = 1
Data RAM address / R8 page1 / RB page2
Data ram address auto-increase / Not support / Enable
“ADD”“SUB” include “carry“ bit / Not support / Determined by RA page2 bit7
PHO / PC0 as Phase Output or I/O / □as I/O
□as Phase output
VREFSEL / DAC Int.Ref.Voltage Select / □DAC Int. Vref~ 2.5V
□DAC Int. Vref~ 2.25V
Application status
UseVoltageRange : V, must be ranged between 2.2 and 5.5V
Crystal: 32768Hz / Shunt capacitance for OSC.: (22P~27P)
Datasheet : Version:

1

EM78P569QTP Ordering Form

Input/Output pin status (mark “” in the adequate blank)
Port5 / Port6
B5 / B6 / B7 / B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7
Input / Input
Output / Output
External pull high / External pull high
LCD / ADC
Port7 / Port8
B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7 / B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7
Input / Input
Output / Output
Internal pull high / Internal pull high
SPI / ╳ / ╳ / ╳ / ╳ / ╳
Port9 / PortB
B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7 / B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7
Input / Input
Output / Output
External pull high / External pull high
LCD / LCD
PortC / 1, Set I/O as output for unused I/O pins.
2, Don’t let input pin floating.
B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7
Input
Output
External pull high
LCD / PWM / ╳ / ╳ / ╳

Programming checklist

Working Frequency
(Please fill Function description) / Operation Mode / Function list / Operation Voltage
□17.91MHz / 4.1 ~ 5.5 V
□14.331MHz / 3.6 ~ 5.5 V
□10.747MHz / 3.0 ~ 5.5 V
□7.165MHz / 2.5 ~ 5.5 V
□3.582MHz / 2.2 ~ 5.5 V
□1.791MHz / 2.2 ~ 5.5 V
□0.896MHz / 2.2 ~ 5.5 V
□0.448MHz / 2.2 ~ 5.5 V
□Green mode / 2.2 ~ 5.5 V
X Idle mode / Don’t have the function / NA
□Sleep mode / 2.2 ~ 5.5 V

1

EM78P569QTP Ordering Form

Register undefined checklist
There are some undefined bits in the registers. The values in these bits are unpredicted. These bits are not allowed to use. We use the symbol “-” in the spec to recognize them. A fixed value must be write in some specific unused bits by software or some unpredicted wrong will occur.
Register / Default value / Initial Setting value
(by user software) / Effect
Register / PAGE / Bit
IOCE / 0 / 0~3 / 0 / 0 / Un-expect error
IOCF / 0 / 6 / 0 / 0 / Un-expect error
The registers defined, please refer to EM785830 Spec.
Application Notice
1, For 10 bits resolution, DAO pin will keep a constant after only change DAC most significant 2 bits (R5 PAGE1 bit6~7). DAO will output correct voltage after write data to least significant 8 bits.
That is to say, when using 10 bits resolution DAC, user must write most significant 2 bits and least significant 8 bits in order.
2, Set IOCC PAGE1 bit0 to “1” otherwise partial ADC function cannot be used.
3, Offset voltage will effect ADC’s result, please refer to the figure.

1

EM78P569QTP Ordering Form

Package information
□73pins Chip / □100pins QFP
Marking (LOGO on IC): 1st line
2nd line
□LOGO is a trademark of customer’s company,
please attach authorized letter.
Development information
Verify Method / Version / Amount
Piggy back / Date code:
OTP / HX/QX: / pcs

Note and Signature

For Customer / For Agent
Note: / Note:
Name: / Name:
Date: / Date:
Telephone: / Telephone:
E-mail: / E-mail:

1

EM78P569QTP Ordering Form

TERMS & CONDICTIONS of WARRANTY AND INDEMNIFICATION

1.THE UNDERSIGNED represents and warrants that（a）it has the proprietary right and title, and/or has been granted all necessary third party licenses, to the digital codes, software, certain designing information, and/or the technical documentation（hereafter refer to Ordering Spec.）thereof, including, but not limited to, the rights to place orders with Elan to design, manufacture, have made, market, sell and promote custom-made products containing such Ordering Spec. in original or variable forms; (b) it is not aware of any rights of any third party from around the world which would or might render the use of any part of the Ordering Spec. unlawful caused by infringing any third party right or breaching legislation enforced in any jurisdiction.

2.THE UNDERSIGNED undertakes, at its expense, to indemnify, defend, protect and hold Elan harmless from and against any and all losses, costs, damages and expenses, including but not limited to, reasonable attorneys' fees and costs resulting from all proceedings, threats of proceedings or claims against Elan, its employees, managers affiliates, subsidiaries, associated companies and respective customers, by any third party for infringement or alleged infringement regarding to the Ordering Spec.provided by THE UNDERSIGNED, or the use thereof, of patents, trademarks, trade secrets, copyrights, and other proprietary rights from around the world.

3. THE UNDERSIGNED shall provide further evidence to proof that the Ordering Spec. complies with the terms and conditions and provide the related code and documents

while the amount of product units is over 2,000,000 pieces per year or under Elan request.

4. Any disputes arising out hereof shall be governed and interpreted according to the laws of the Republic of China and Hsinchu District Court shall have exclusive jurisdiction thereof.

THE UNDERSIGNED:

(Company Name)

By ______

Name:

Title:

Date:

1