Hellenic Accreditation System

Annex C4/6 to the Certificate No.103-4
SCOPE of ACCREDITATION
of
«MOODY TOTTRUP HELLAS S.A»
asa Type A Inspection Body,
in line with E.C Directives

Products or Products Family/Intended use

/ Procedure/ Type of inspection /

Annexes, Articles , Sections , Modules of Directives/Standards/Regulations/In House procedure

Simple pressure vessels / -EU-Type Examination
-Conformity to type based on internal production control plus supervised vessel testing
-Conformity to type based on internal production control plus supervised vessel checks at random intervals
-Conformity to type based on internal production control / Directive 2014/29/EU
M.D. Oik. 46248/DTVN 1008/2016 (G.G.1339/B/2016)
-Annex ΙΙ (Module B)
-Annex ΙΙ(Module C1)
-Annex ΙΙ(Module C2)
-Annex II (Module C)
-ASME, SectionII, V, IX, VIII (Division1 and 2)*
-ΕLΟT ΕΝ 286-1*,
-ΕLΟΤΕΝ ISO 15609-1 to 6
-ΕLΟΤΕΝ 15614-1 to 14
-ΕLΟΤ EN10204
-ΕLΟΤ ΕΝ ISO 9609-1 to 5

Products or Products Family/Intended use

/ Procedure/ Type of inspection /

Annexes , Articles , Sections , Modules of Directives/Standards/Regulations/In House procedure

Pressure equipment
1. Unfired pressure vessels
Cat 1.1
Sub cat 1.1.1, 1.1.2, 1.1.3, 1.1.4
2.Cryogenic vessels
3. Metallic industrial piping
Cat 1.3
Sub cat 1.3.1, 1.3.2, 1.3.3
4. Water-tubboilersshell
boilers and auxiliary
installations
Cat 1.2
Sub 1.2.1,1.2.2
5. Assemblies under pressure
Cat 2.1, 2.2 / -Internal production control
-EU-Type examination (production type)
- EU-Type examination
(design type)
-Conformity to type based on internal production control
-Conformity to type based on verification
Conformity based on unit verification / Directive 2014/68/EE
G.G Ar. Oik.74124/DTBN 1431 (FEK 2278/27.07.2016)
-Annex III , Module A2
-Annex III , Module B
-Annex III , Module B
-Annex III , Module C2
-Annex III , Module F
-Annex III , Module G
-ASME, Section II, V, IX, VIII (Division1 and 2)*
-ADMERKBLATT*
-ΕLΟΤΕΝISO 15609-1 to 6
-ΕLΟΤΕΝ 13445-1 to 8
-ΕLΟΤ ΕΝ 15614-1 to 14
-ΕLΟΤΕΝISO 9606-1 to 5
-BS 5500*,
-ΕLΟΤΕΝ 764-5,7
-ELOT EN 13458-1 to 3
-ΕLΟΤΕΝISO 15609-1 to 6
-ΕLΟΤΕΝ 15614-1 to 14
-ΕLΟΤΕΝISO 9606-1 to 5
-ΕLΟΤΕΝ 764-5,7
-ΕLΟΤΕΝ 13480-1 to 5
-ΕLΟΤENISO 9609-1 to 5
-ΕLΟΤ EN ISO 15609-1to 6
-ASMEB 31.1,31.3*
-ASME BPV Section I, IV*
-ΕLΟΤ ΕΝ 12952-1, to 18
-ΕLΟΤΕΝ 12953-1, to 13
-ΕLΟΤ EN ISO 9606-1 to 5
-ΕLΟΤ EN ISO 15609-1 to 6
-ΕLΟΤ EN ISO 15614-1 to14
-ASMEI, IV, VIII (Division 1 και 2)*
-ADMERKBLATT*
-ΕLΟΤ ΕΝ 12952-1, έως 18
-ΕLΟΤ ΕΝ 12953-1, έως 13
-ΕLΟΤ ΕΝ 13445-1 έως 8
-ΕLΟΤ ΕΝ 13458-1 έως 3
-ΕLΟΤ ΕΝ 13480-1 έως 5
-ASME B 31.1,31.3*
-BS 5500*

Products or Products Family/Intended use

/ Procedure/ Type of inspection /

Annexes , Articles , Sections , Modules of Directives/Standards/Regulations/In House procedure

Pressure equipment
1.Specification and approval of
welding procedures
2.Qualification test and approval
testing of welders / -Approval of welding methods
-Approval testing of welders / Directive 2014/68/EE
G.G Ar. Oik.74124/DTBN 1431 (FEK 2278/27.07.2016)
-Annex I, par.3.1.2
-Annex I, par.3.1.2
-ΕLΟΤΕΝ ISO 15614-1 to 14
-ASMEIX*
-ΕLΟΤΕΝ ISO 9606-1 to 5
-ASME IX*

*The reference to non-harmonized European Standards, Regulations or Normative Documents with the star mark (*) indicates that

only a specific part of the requirements of the above European Standards, Regulations NormativeDocuments, complements, to the

extent that is necessary for the assessment of the compliance of the product, either the harmonized European Standards EN

which fulfil essential requirements of European Directives , or the provision of European Directives.

Address oftheBody :21, Elvetias , 153 42 Agia Paraskevi, Greece

Approved Signatories : P.Meimaridis, K.Psarakis,V.Eliezer

This Scope of Accreditation replaces the previous one, dated 21.01.2015.

The Accreditation Certificate Νο.103-4, to ELOT EN ISO/IEC 17020:2012, is valid until 09.10.2018.

Athens, 12.09.2016

George Kallergis

Director of Bodies Accreditation Division

Page1of1 Annex C4/6 to the Certificate ESYD No.103-4 12.09.2016