P R O D U C T D A T A S H E E T

Pressure Washer Cleaner (DSI 6000PWC)

PRODUCT DESCRIPTION

A highly concentrated aqueous cleaner for use with high pressure jet guns for power cleaning dirt, oil, grime and stubborn contaminants from plant, vehicles and equipment.

Designed for use in production, maintenance and overhaul facilities, Pressure Washer Cleaner can also be used through automated scrubbers for floor cleaning and is compatible with most metals and plastics.

Pressure Washer Cleaner can be diluted down severely without loss of efficacy. It contains no chlorinated or ozone-depleting solvents and operates at a low pH level. It is classed as non-hazardous waste for straightforward safe disposal.

For specific Health & Safety data, please refer to the COSSH data sheet.

APPLICATION METHODS

Through hogh pressure jet washers at recommended concentrations – usually 1-5%. Suitable for cold or steam pressure cleaning

APPROVALS

Aerospace –

SMI Boeing D6-17487 (J) (Conforms – Sandwich Corrosion Test, Acrylic Crazing Test, Paint Softening Test, Hydrogen Embrittlement Test)

SMI McDonnell-Douglas AMS 1526B (Conforms – Sandwich Corrosion, Total Immersion Corrosion, Low-Embrittlement, Flash Point, Effect on Transparent Acrylic Plastics, Effect on Painted Surfaces, Effect on Unpainted Surfaces)

SMI McDonnell-Douglas C SD #1 (Conforms – Effect on Painted Surfaces, Residue Test, Sandwich Corrosion, Stress Crazing on Acrylic Plastics, Immersion Corrosion, Cadmium Removal, Hydrogen Embrittlement)

Food – U.S.D.A A1 category approval for use in food preparation areas.

PHYSICAL PROPERTIES (Typical values) Pressure Washer Cleaner

Density / 1.04 g/cm³ / Auto ignition temperature / NA
Boiling Range / 100°C / Explosion limits @ 28°C / NA
pH Value / 9-10 / Appearance / Colourless liquid
Solubility in H²O / Totally soluble / Odour / Soapy
Flashpoint / NA / Safety Profile / Non Hazardous

LIMITED WARRANTY

All statements, technical information and recommendations contained herein are based on tests Mykal Industries Limited believes to be reliable, but the accuracy or completeness thereof is not guaranteed.

BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR IT’S INTENDED USE.

Quality

Mykal Industries place great importance on Quality Control and all products

are rigorously tested to the highest industry standards.

Our manufacturing facilities are fully accredited under ISO 9001 registration.

Distribution

Mykal have a network of carefully selected distribution partners throughout the

UK and Europe to ensure continuous product availability. For your nearest

Distribution outlet please contact our Sales Office or our regional representative.

Technical Support

Mykal can offer a comprehensive range of additional services and benefits to customers.

Our Laboratory Testing Facilities are equipped to deal with most product and process applications.

Full technical data sheets, samples and advice on processes are available on request

and our Product Development Programme demonstrates our ongoing commitment

to providing new, innovative solutions to industrial cleaning problems.

Safety

Mykal use natural ingredients such as citrus oils and plant surfactants to ensure

environmental and user safety is paramount in our products and also to aid disposal.

Mykal avoid using hazardous chemicals such as harsh alkalis and solvents.

Approvals and Product Benefits

Mykal products have been tested and approved for use at the very highest level by the Defence,

Automotive, Aerospace and Oil Industries, among many others.

This information and our technical advice – whether verbal, in writing or by way of trials – are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended process and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with the current version of our General Conditions of Sale and Delivery.

A|C|G - KEMITOR

Pb. 1132 Sentrum, 0104Oslo, Norway

Tel: +47 9228 0137 Mail: URL: - 1 -