Installing multiple versions of the AQX server service on the same server

Installing multiple versions of the AQX server service is almost exactly the same as a single server installation. So for the basic instructions please consult the standard “AdQuest Millennium Server Installation Guide.docx” document.

The differences are:

a)The name of the server virtual directories etc will need to de different to you usual server setup.

b)Your AQX processing .dll will need to be a different name to the standard processing .dll (note this file cannot be renamed, you must use a different file that L&J will supply)

This document will only provide the differences to the basic installation. Please read the instructions to install the server in the “AdQuest Millennium Server Installation Guide.docx” document and reference this document for the additional steps if required at each stage.

  1. L&J suggests that you select a naming convention that is then used throughout the whole install to reduce confusion. i.e a Normal installation uses “AQX” as the server name, virtual directory etc etc, we suggest you select a name like “AQX_Historical” or “AQX_Server2” and then maintain this name throughout the install. For the sake of this document I will use the example “AQX_Server2” however you can select a name of your choice as long as you use the same name everywhere.
  1. Install the new server as per the “3. Installing the AdQuest Millennium Server”
  2. At point 1: Use normal instructions
  3. At point 2:you must select a different folder location to your existing AQX server install.
  4. At point 3: Use normal instructions
  5. At point 4:you must select a different server from the “Country” list. You CANNOT use the same server name twice for additional servers of the server will not work. The first install is usually AQX<COUNTRY NAME>, so for additional installations use another version with a number. In my example I will assume you have used AQXServer2. Then select NEXT.
  6. At point 5: Use normal instructions
  7. At point 6: Use normal instructions
  8. At point 7: Use normal instructions
  9. At point 8: Use normal instructions
  10. At point 9: Use normal instructions
  11. At point 10: Use normal instructions
  12. At point 11: Use normal instructions
  13. At point 12: Use normal instructions
  14. At point 13: Use normal instructions
  15. Configure the server as per the “4.1 Setting Up A Webserver on The AdQuest Millennium Server Machine”

4.1.1 Windows Server 2003 and earlier with IIS 6.0

  1. At point 1: Use normal instructions
  2. At point 2: Use normal instructions
  3. At point 3: Use normal instructions
  4. At point 4: Use normal instructions
  5. At point 5: Use normal instructions
  6. At point 6: Use your chosen name instead of AQX i.e: “AQX_Server2”
  7. At point 7: Use normal instructions
  8. At point 8: Use normal instructions
  9. At point 9: Use normal instructions
  10. At point 10: Use normal instructions
  11. At point 11: Use normal instructions
  12. At point 12: Use normal instructions
  13. At point 13: Use normal instructions
  14. At point 14: Use normal instructions
  15. At point 15: Use normal instructions
  16. At point 15: Use normal instructions
  17. At point 16: Use normal instructions
  18. At point 17: Use normal instructions

4.1.2Windows Server 2008 with IIS 7.0

  1. At point 1: Use normal instructions
  2. At point 2: Use normal instructions
  3. At point 3: Use normal instructions
  4. At point 4: Use normal instructions
  5. At point 5:Use normal instructions
  6. At point 6: Use normal instructions
  7. At point 7: Use normal instructions
  8. At point 8: Use normal instructions
  9. At point 9: Use normal instructions
  10. At point 10: Use your chosen name instead of AQX i.e: “AQX_Server2”
  11. At point 11: Use normal instructions
  12. At point 12: Use normal instructions
  13. At point 13: Use normal instructions
  14. At point 14: Use your chosen name instead of AQX i.e: “AQX_Server2”
  15. At point 15: Use normal instructions
  16. At point 16: Use normal instructions
  17. At point 17: Use normal instructions
  18. At point 18: Use normal instructions
  19. At point 19: Use normal instructions
  20. At point 20: Use normal instructions
  21. At point 21: Use normal instructions
  22. At point 22: Use normal instructions
  23. At point 23: Use normal instructions
  24. At point 24: Use your chosen name instead of AQX i.e: “AQX_Server2”
  25. At point 25: Use normal instructions
  26. At point 26: Use normal instructions
  27. At point 27: Use normal instructions
  28. At point 28: Use your chosen name instead of AQX i.e: “AQX_Server2”
  29. At point 29: Use normal instructions
  30. At point 30: Use normal instructions
  31. At point 31: Use normal instructions
  32. At point 32: Use normal instructions
  33. At point 33: Use normal instructions
  34. At point 34: Use normal instructions
  35. At point 35: Use normal instructions
  36. At point 36: Use normal instructions
  37. At point 37: Use normal instructions
  38. At point 38: Use normal instructions
  39. At point 39: Use normal instructions

4.3 Configuring Internet Information Services 6.0

  1. At point 1: Use normal instructions
  2. At point 2: Use your chosen name instead of AQX i.e: “AQX_Server2”
  3. At point 3: Use normal instructions
  4. At point 4: Use normal instructions
  5. At point 5:Use normal instructions
  6. At point 6: Use normal instructions
  7. At point 7: Use normal instructions
  8. At point 8: Use normal instructions
  9. At point 9: Use normal instructions
  10. At point 9: Use normal instructions
  11. At point 11: Use normal instructions
  12. At point 12: Use your chosen name instead of AQX i.e: “AQX_Server2”
  13. At point 13: Use normal instructions
  14. At point 14: Use normal instructions
  15. At point 15: Use normal instructions
  16. At point 16: Use normal instructions
  17. At point 17: Use normal instructions
  18. At point 18: Use normal instructions

4.4 Extra configuration steps for IIS 6.0 running on Windows Server 2003 Service Pack 1 or above

  1. At point 1: Use normal instructions
  2. At point 2: Use normal instructions
  3. At point 3: Use normal instructions
  4. At point 4: Use your chosen name instead of AQX i.e: “AQX_Server2”
  5. At point 5:Use normal instructions
  6. At point 6: Use normal instructions
  7. At point 7: Use your chosen name instead of AQX i.e: “AQX_Server2”
  8. At point 8: Use normal instructions
  9. At point 9: Use normal instructions
  10. At point 9: Use normal instructions
  11. At point 11: Use your chosen name instead of AQX i.e: “AQX_Server2”
  12. At point 12: Use your chosen name instead of AQX i.e: “AQX_Server2”
  13. At point 13: Use normal instructions