ESPUNA – Quality Insurance
INFORMATION AND USING INSTRUCTIONS
SPE 003/C
Folio 1/1
Reference 23286
DESCRIPTIVE : fire fighter gauntlet, anti abrasion palm, back and cuff made of heat resistant materials combination, fully lined with a breathable membrane, hand lined with para aramid, elastic wrist tensioner, cuff lined with a fireproof fabrics, self adhesive fastening plus a two-inch reflective trim, metacarpus protection, artery guard
SIZES: 6 7 8 9 10 11 (12) (13) standard 9/10
Marking
/ This item matches the 89 / 686 / EEC requirements: innocuousness, comfort and strength.Has obtained the EC agreement No. 0072/076/162/01/06/0004 Ext n° 01/03/06 issued by the :
ITFH- Institut Français du Textile et de l’Habillement (No. 0072)
Avenue Guy de Collonge – F - 69134 ECULLY
Is subjected to an EC Quality Insurance System for its production and under the supervision of :
A.F.A.Q. – Association Française d’assurance Qualité (No. 0333)
116, Avenue Aristide Briand - F-92224 BAGNEUX
STANDARDS REfErences
EN 388 (2003) : Mechanical hazards / EN 659 (2003) : Fire fighters/ Abrasion (palm) : 4 / 4
Blade cut (palm ) : 5 / 5
Blade cut (back) : 3 / 5
Tear(palm) : 4/ 4
Puncture(palm) : 3 / 4 / / Heat-resistant lining : (do not melt, do not drip)
Heat shrinkage : 5% at 180°C
Seams breaking strength : 350 N Time to remove gloves : 3 sec.
Water penetration : none
Chemical products penetration :none
Glove integrity: no leakage
EN 407 (1994) : Heat / Fire / EN 420(2003) : general Requirements
/ Burning behaviour : 4 / 4
Contact heat (palm) : > 10 s at 250°C
Convective heat (palm) : 4 / 4
Convective heat (back) : 3 / 4
Radiant heat (back) : true to EN 659 / Dexterity : 4 / 5
Reflective trim in accordance with the EN 471 standard performance requirements for the retro reflection – High visibility warning clothing.
USING INSTRUCTIONS : fire fighters protective glove. It protects the hand during fire fighting includingsearching and rescue operations.This glovemust not be used for a voluntary handling of liquid chemical products. However, it will suitably protect in case of accidental contact with chemicals.
Levels of performance are obtained from trials made under conditions precisely defined by the standards. Thus, use in other conditions is the user’s responsability, who must check that the product protects against the appropriate hazard. If further information is required, contact your product distributor.
PERSONAL PROTECTIVE EQUIPMENT - CATEGORY III
STOCKING AND MAINTENANCE INSTRUCTIONS
- Keep in the original packaging, normal temperature and moisture, opened and airy room.
- Machine washable at 40°C.
- Dry to room temperature.
- We do not guarantee the recycled products.
Manufactured by: espuna®