STRYUM ALUMINIUM CLADDING
1.GENERAL
This section relates to the supply and fixing of Stryumprofiled horizontal and vertical aluminium cladding complete with accessories. For use on new and existing residential and commercial projects.
It includes:
-for fixing on to timber or steel framing over a drained and ventilated cavity
-associated extruded flashing sections and components
1.1MANUFACTURER/SUPPLIER DETAILS
Manufacturer/supplier contact details
Company:Vitekk Industries Pty Ltd
Web:
Email:
Telephone:1800 644 025
ACCREDITATION AND CERTIFICATION
1.2AS1530.1 – 1994 Combustibility test for building materials
Stryum panels have been tested and are deemed 100% non-combustible in accordancewith AS1530.1 – 1994
AS 4040.3-1992 Methods of testing sheet roof and wall cladding - Resistance to wind pressures for cyclone regions
AS 1562.1 - 1992 Design and installation of sheet roof and wall cladding – Metal
Stryum’sserviceability and strength limit state wind load testing was conducted in accordance AS 4040.3 Resistance to Wind Pressures for Cyclone Regions
AS 1170.2 – 2011 Large Body Debris Impact Test
Stryum panels have been tested and passed the Large Body Debris Impact test. Tested to AS/NZS 1170.2-2011
GENERAL STANDARDS
AS1866: 1997 All extrusions manufactured are produced to the chemical
composition, mechanical property and dimensional tolerances within the standard
AS 1231: 2000 Aluminium and aluminium alloys - Anodic oxidation coatings
AS 3715: 2002 Metal finishing - Thermoset powder coating for architectural applications of aluminium and aluminium alloys
AS/NZS ISO 9001: 2008 – Quality Management Systems
AS/NZS ISO 14001: 2004 – Environmental Management Systems
ISO/IEC 17025 – NATA Accredited Mechanical Testing Laboratory
Warranties
1.3WARRANTY - MANUFACTURER/SUPPLIER
Provide a material manufacturer/supplier warranty:
15 - 20 yearsFor Anodised range
-Provide this warranty on the manufacturer’s standard form.
-Commence the warranty from the date of practical completion of the contract works.
1.4WARRANTY - MANUFACTURER/SUPPLIER
Provide a material manufacturer/supplier warranty:
30 yearsFor Interpon D3020 Fluoromax (or Dulux equivalent)
20 yearsFor Interpon D2015 Ultriva (or Dulux equivalent)
10 yearsFor Interpon D1000 (or Dulux equivalent)
-Provide this warranty on the Interpon standard form.
-Commence the warranty from the date of practical completion of the contract works.
2.PRODUCTS
Materials
2.1STRYUMSHADOW(300mm cover)
Stryum Shadow profiled metal cladding, manufactured from extruded 6060 T5 aluminium alloy, interlocking profile, 329mm x 15.72mm x 3.5mm thick with a 300mm cover, supplied in 6.5 lengths as a standard. Profiles are supplied prefinished.
2.2STRYUM SHADOW (198mm cover)
Stryum Shadow profiled metal cladding, manufactured from extruded 6060 T5 aluminium alloy, interlocking profile, 222mm x 15.27mm x 2.5mm thick with a 198mm cover, supplied in 6.5 lengths as a standard. Profiles are supplied prefinished.
2.3STRYUM SHADOW (160mm cover)
Stryum Shadow profiled metal cladding, manufactured from extruded 6060 T5 aluminium alloy, interlocking profile, 183.11mm x 15.2mm x 1.8mm thick with a 160mm cover, supplied in 6.5 lengths as a standard. Profiles are supplied prefinished.
2.4STRYUM STEP
StryumStep profiled metal cladding, manufactured from extruded 6060 T5 aluminium alloy, interlocking profile, 290mm x 18.35mm x 2.8mm thick with a 263.6mm cover, supplied in 6.5 lengths as a standard. Profiles are supplied prefinished
STRYUM SEAM
Stryum Seam profiled metal cladding, manufactured from extruded 6060 T5 aluminium alloy, interlocking profile, 290mm x 37.7mm x 2.8mm thick with a 265mm cover, supplied in 6.5 lengths as a standard. Profiles are supplied prefinished
2.5STRYUMPROPRIETARY TRIMS
StryumFlashing System, extruded aluminium starter trim, internal and external corners, foot mould, male/female stop end and angle extrusions manufactured from 6060 T5 aluminium alloy. The flashing sections are supplied to site cut to length and are prefinished to match the Stryum profiled metal cladding.
Components
2.6STRYUM STARTER
Stryum starter, pre finished extruded 6060 T5 aluminium 68.2mm x 7.2mm x 2.5mm thick available in 6.5 metre lengths.
2.7STRYUM INTERNAL CORNER
Stryum internal corner, pre finished extruded 6060 T5 aluminium 68.2mm x 7.2mm x 2.5mm thick available in 6.5 metre lengths.
2.8STRYUM EXTERNAL CORNER (X shaped extrusion)
Stryumexternal corner, pre finished extruded 6060 T5 aluminium 68.2mm x 7.2mm x 2.5mm thick available in 6.5 metre lengths.
2.9STRYUM SEAM EXTERNAL CORNER
StryumSeam external corner, pre finished extruded 6060 T5 aluminium 68.2mm x 7.2mm x 2.5mm thick available in 6.5 metre lengths.
2.10STRYUM FOOT MOULD
Stryumfoot mould, pre finished extruded 6060 T5 aluminium 68.2mm x 7.2mm x 2.5mm thick available in 6.5 metre lengths.
2.11STRYUM STOP END (2 pieces)
Stryumstop end, pre finished extruded 6060 T5 aluminium 68.2mm x 7.2mm x 2.5mm thick available in 6.5 metre lengths.
2.12STRYUM ALUMINIUM BACKING PLATE (Inter-Storey Junction)
Purpose made folded and pre paintedflashing.
Accessories - supplied by building contractor
2.13FIXINGS
Self-drilling, 12 Gauge Class 4 hex head galvanised steel screws
AS3566-1988
2.14SISALATION WALL WRAP
Fletcher Insulation Sisalation® WallwrapExHD (or equivalent)
Sisalation wall wrap should be installed in accordance with AS/NZS 4200.2:1994
2.15TOP HAT
Rondo M525: 20 x 25 x 50 x 25 x 20 x 0.75 BMT (or equivalent)
3.EXECUTION
Conditions - general
3.1DELIVERY
Keep claddings and flashings dry in transit. Take delivery of cladding in an undamaged condition. Reject all damaged materials.
3.2STORAGE
Store Stryum cladding and accessories on a level, firm base, off the ground, in dry conditions, well ventilated, out of direct sunlight and completely protected from weather and damage. Ensure storage areas are away from current work areas. Cover to keep dry until fixed. Take care to avoid damage to pre finished surfaces.
3.3HANDLING
Avoid distortion and contact with potentially damaging surfaces/substances. Do not drag claddings and flashings across each other, or across other surfaces. Protect edges, corners and surfaces from damage.
3.4SUBSTRATE
Do not commence work until the substrate is of the standard required by the Stryum approved installer for the specified claddings and flashings, level and in true alignment.
3.5PROTECT
Protect surfaces, window and door joinery, and finishes already in place, from the possibility of damage during the installation process.
3.6CONFIRM LAYOUT
Before commencing work confirm the proposed installation of the cladding, flashings and expansion joints and other visual considerations of the finished work.
3.7CO-ORDINATE INSTALLATION
Co-ordinate installation of cladding and flashings with associated trades.
Completion
3.8ROUTINE CLEANING
Carry out routine trade cleaning of this part of the work including periodic removal of all debris, unused and temporary materials and elements from the site.
3.9DEFECTIVE OR DAMAGED WORK
Repair damaged or marked elements. Replace damaged or marked elements where repair is not possible or will not be acceptable. Leave work to the standard required for following procedures.
3.10PROTECTION
Provide the following temporary protection of the finished work:
~
3.11LEAVE
Leave this work complete with all necessary flashings and capping all properly installed as the work proceeds so the finished cladding is completely weathertight.
STRYUM ALUMINIUM CLADDING Page 1