User Manual

Please refer to this manual before using the product

V0.1

1.Notes

1.1The company reserves the right to modify the contents of this manual without any further notification. It is normal that some functions may vary in certain versions of software.The software can be upgraded online.

1.2Please charge this product with the configured chargerfor no less than 2 hours before using it.

1.3Please turn off the watchbefore installing SIM card.Openthe card cover using the corresponding screws and screw drivers that are included in the package.

Once the SIM card is inserted,please remember to put the waterproof ring around the SIM cover, and tighten the screw to avoid water inflow.

1.4 This Android watch supports 3G WCDMA with NANO SIM card, and also compatible with 2G GSM.

1.5 To ensure longer battery life, you are recommended to close highpower consumptionfunctions if they are needless for you such as Wake-up gesture, GPS, WiFi, BT.It is normal that the watch temperature may increase mildly while it isconnecting to internetwith WIFI or 3G network because of higher power consumption.

2. Product Overview

2.1、Basic Operating

1. Hold the button to turn on the watch, it will be slower at the first time entering into the Android OS:

I）language settings.

II）Personal information settings.

III）Scan the QR code to download and install the software with your smart phone . Connect via Bluetooth to sync information.

2、Once the watch is working, you can enter into the selectionpage by pressingthe button for around 2 seconds:

I) Power off: Turn off the watch.

II) Reboot: Restart the watch.

III) Power save: Shift to the power save mode then only the digital clock is working.

IV) Recent Task: Check the working apps and turn off them.

V） full/small: Adjust the screen in round or square according to your need.

3. Menu Operating

1）Left slide to enter into the main function menu

2）Right slide to enter into the notification menu

3）Down slide to enter into the status bars and short-cut settings

Ⅰ) First page:telephone signal status, BT connecting status, time and date

II）Second page:Vibrator switch, Wake-up gesture switch, :Brightness, flight mode, BT switch, WIFI switch, GPS switch etc.

III）Third page: pedometer

4）Up slide to view the weather information (network is requested)

5）Right slide to return to the previous menu.

2.2 Watch face setting

Touch the watch face for around 1 second to enter into the watch faces selection pages, slide to choose one face.

Note: you can download the new faces:

1)Network is needed (WI-FI)

2)Click “+” on the watch faces selection pages

3)Preview the faces and click to download

3.Detailed use instructions

3.1 Download Wiiwatch

Click “Connect Phone” on the main menu, and follow the instruction:

1)Install the Wiiwatch app in your cellphone (by scanning the QR code, or searching “Wiiwatch” on App store or Google play store)

2)Open the Wiiwatch app on phone (need to turn on the Bluetooth of the phone firstly)

3)Click the button to search your phone and connect it.

Note：

  1. This program is only used for synchronization between watch and cellphone.
  2. You are recommended to download the software when WIFIis workable.
  3. Please upgrade Wiiwatch app to the latest version.

3.2 Functions introduction

Phone：SIM card is needed for making/answering a call.

Contacts：Add new contacts or sync the contacts of the cellphone

Messaging：SIM card is needed for receiving/sending SMS.

Setting：Basic settings of the watch, such as BT, clock,volume, reset and etc..

  1. Sound
  2. Display
  3. App List Style
  4. Connect: BT, WIFI, GPS settings
  5. Phone Assistant：QR code
  6. Gesture：screen on raising, pedometer service
  7. Power saving
  8. Language & input
  9. Date & time
  10. Reset equipment
  11. Uninstall application
  12. About watch: product information and wireless upgrade

Clock：Create and edit the alarm clock. Maximum 8 alarm clocks can be set.

Sound recorder: Record the sound

Calendar: Month, date and week can be displayed.

File :Manage the files in the memory of watch.

Browser

Remote control:Remote control the music from the smart phone

Remote Capture：Remote control the camera from the smart phone

Music: Play the musicin the memory of watch

Health：Pedometer, heart rate checking

Gallery:Check the pictures taken by the camera

Fine me:

1)You can find your phone via your watch when the BT is connected.

2)There will be an alerting of your phone when you use this function

Weather: Local weather information (network is needed）

4. Precautions

4.1Please charge the watch completely before use. Charging time is 1-2 hours.

4.2Please use a charger adaptor with 5V 1A to connect our standard magnetic cable to charge the watch, Please make sure that the cable is well connected during charging.

(Most of the charger adapters of the cellphones are compatible, check if the specification of the adapter is 5V 1A)

4.3 Anti lost function is standby only while the Bluetooth is well connected.

5. Solutions of troubles

In case there’s a problem during the using of the watch, please solve it accordingly by the following ways. If the problem still exists, please contact the seller or designated maintenance personnel.

5.1 The watch cannot be turned on

1)Long press the power button

2)Make sure there is battery enough

3)Please recharge the watch and start it again.

5.2 The watch turn itself off

It is possible the battery is used up. Please recharge the watch and start it again.

5.3Short battery life

1.Make sure the battery has been completely charged with the adapter of 5V 1A.

2.Turn off the needless functions which are high power consumption such as GPS, WIFI, , walk-up gesture etc.

5.4Cannot be charged

1.Check if the battery can be used. The performance of battery will be reduced after several years using.

2.Check if the charger is working properly, (both the adapter and cable), if not,try another one.

3.Check if all the connecting is well, try again.

For more questions, please contact us directly by the following information: