JITEN J. GADHAVI
Email :
B.E.METALLURGY & MATERIAL SCIENCE ENGNEER
Indus Institute of Engineering & Technology,
Rancharda, Via – Thaltej,
Ahmadabad,
Gujarat
______
CAREER OBJECTIVE:
To associate myself with an organization that provides a challenging job and opportunity
Prove Innovative Skill and diligent work. To be Involve in product quality improvement and firm popularity in business market.
PERSONAL DETAILS:
Date of Birth : 18th December, 1990
Gender : Male
Weight : 75kg
Height : 170cm
Cast : Hindu charan gadhavi
Category : OBC
Languages Known : English, Hindi and Gujarati
Nationality : Indian
Hobbies : Reading novels, Listening music, Computer work, singing, cricket,
Exercise, playing table, travelling.
Willing to Relocate
(Within & outside GUJ) : YES
Permanent Address : shree shakti chock, juna ghantila, Ta- maliya miyana,
dist. Rajkot, Gujarat, india
Residential Address : p.w.d qtr. Mani mandir campus, Nr. Bal mandir, guest house road,
Morbi-363641, Gujrat, india
Contact Numbers : Residence-02822-223704, Mobile-9724506701
E-mail :
Planning for Masters : NO
ACADEMIC QUALIFICATION:
SSC : 71.29%
Examination Board : Gujarat Secondary Education Board (G.S.E.B)
School : The v.c. technical High School, morbi-363641
HSC : 62%
Examination Board : Gujarat Higher Secondary Education Board (G.H.S.E.B)
School : The v.c. technical High School, morbi-363641
B.E. MATERIAL SCIENCE & METALLURGIAL ENGINEERING aggregate: 66% (first class)
No / Subjects which I learn in B.E. / Qualification / University / Board / Year / S.P.I.1.
2.
3.
4. / Metal working processes
Material selection and failure analyses
Material characterization
Contributor and personality development / B.E.VIII Sem / Gujarat Technological University / 2012 / 8.59
1.
2.
3.
4.
5. / Physical metallurgy-2
Non-destructive testing
Metal joining processes
Alloy design
Surface engineering and coating / B.E.VII Sem. / Gujarat Technological University / 2012 / 6.93
1.
2.
3.
4.
5. / Physical metallurgy-1
Steel making
Powder metallurgy
Advance material
Electrometallurgical corrosion / B.E.VI Sem. / Gujarat Technological University / 2011 / 4.40
1.
2.
3.
4.
5.
6. / Foundry technology
Iron making
Non ferrous extractive metallurgy
Fuel Furnace and Refractory
Managemant-2
Automobile-2 / B.E.V Sem. / Gujarat Technological University / 2011 / 5.27
1.
2.
3.
4.
5.
6. / Principal of extractive metallurgy
Transport phenomenon
Mechanical behavior & testing of material
Maths-4
Management-1
Automobile-1 / B.E.IV Sem. / Gujarat Technological University / 2010 / 3.39
1.
2.
3.
4.
5.
6. / Material science and metallurgy
Mineral processing
Metallurgical thermodynamics
Maths-3
Machine design & Industrial drawing
Electrical machine / B.E.III Sem. / Gujarat Technological University / 2010 / 5.57
1.
2.
3.
4.
5. / Chemistry
computer programming utilization
mechanics of solid
Maths-2
Engineering graphics / B.E.II Sem. / Gujarat Technological University / 2009 / 4.00
1.
2.
3.
4.
5. / Communication skill
Environment study
Elements of civil engineering
Elements of mechanical engineering
Elements of electrical engineering / B.E.I Sem / Gujarat Technological University / 2009 / 2.00
INDUSTRIAL WORKING EXPERIENCE:
1. Company: APPEX ALLOY STEEL PVT. LTD (3 MONTH trainee)
Address: 432/2, phase-4, G.I.D.C., Naroda, Ahmedabad-382330
I was very happy that I had an opportunity to work with most competitive and well established foundry and there owner. From this experience I learned small investment with high profit of margin in such small steel plant.
2. Company: ALL-WIN ALIMINIUM INDUSTRIES (3 MONTH working)
Address: allwin compound, Nr.panchal industrial colony, maheshwary mill
road, Tavdipura
I was very happy that I had an opportunity to work with most competitive and well established foundry and there owner. I was given the opportunity to work in the Foundry Department and have an overview of the other departments as well.
3. Company: RAJAN TECHNOCAST PVT.LTD. SHAPAR VERAVAL, RAJAKOT (3 MONTH working)
I am very happy to working with RAJAN, where I can improve my practical knowledge and working experience. It was an excellent freely working experience in spectroscopy and melting supervisor.
4. Company: VAISHALI INDUSTRIES PVT. LTD MORBI (june-2012 to Augst-2015
I WAS WORKING IN VAISHALI INDUSTRIES AS SR. ENGINEER AND LOOKING FOR QUALITY, PRODUCTION, AND SITE MAINTENANCE ENGINEER, AND I AM SERVING AROUND MORE THAN 500 MANUFACTURING UNITS LIKE PETROCHEMICAL, CERAMIC, FOOD, PAPER MILL, CHEMICAL AND OTHER INDUSTRIES. I AM LOOKING FOR STEEL FABRICATION, QUALITY, MATERIAL SELECTION, AND PIPING WORK, ENERGY RECOVERY, SITE MAINTENANCE, HEAVY STRUCTURE ERECTION, AND EVERY TYPES OF ENGINEERING AND MANUFACTURING WORKS
5. Current company: ASHWARAJ INFRASTRUCUTRE PVT. LTD since (sept-2015 to present)
Presently I am working in ASHWARAJ INFRASSTRUCTURE PVT.LTD as a sr. engineer and I am serving as a production, fabrication quality, maintenance, dispatch, and site construction manager, also I am looking for corporation relation and business development process.
All types of steel, sheet metal work, fabrication, maintenance, piping work, energy recovery, all types casting, metal work, heat treatment, material selection and fabrication in charge.
v Handling the project planning, design and Implementing.
v Foundry experience, steel plant experience, gas, petrochemical, paper mill, chemical, food, ceramic, etc plant maintenance experience.
v Providing the feasible solution to increase efficient work.
v Coordinating the Product development work of the Product management.
Controlling the product quality and men power handling.
PROFESSIONAL SYNOPSIS
v As a material science and metallurgist having good knowledge of metal and alloys its application and design, quality, and material management.
v Having good working experience in pipinf work and fabrication and steel quality and maintenance.
v Having good working experience in mechanical project like petrochemical, gas, food, paper mill, foundry, and chemical plant as site in charge and material selection for application.
v As a metallurgist I have good knowledge of ASTM STANDARS AND ISO, and also experience of ferrous fabrication like MS and SS GRADES.
v Also having good knowledge management and distribution of work and man power.
v Having good foundry experience in melting and alloy design for required application.
v Having good knowledge of non ferrous metal also.
v Having good knowledge of minerals and process engineering
v Developing new design and process treatments and having good knowledge of all type of casting, fabrication, heat treatments and DT-NDT testing.
v Having good knowledge of heat recovery and waste solution.
v Having good knowledge of application and process with metallic and non metallic material like ceramic, refractory, and glass.
.
INDUSTRIAL VISIT:
1. Electortherm (India) Ltd, Ahmedabad
Induction Furnace Manufacturing
2. Electortherm (India) Ltd, Samakhyali
Steel Plant
3. GMDC Kadipani
Flourspar Mining
4. M.S. University Lab. – Baroda
5. Technocraft, Odhav GIDC Ahmedabad
Manufacturing Of Rolling Mill Rolls
6. Metso Mineral, Odhav GIDC, Ahmedabad
Sand Casting
7. Divine Lab, Ahmedabad
Destructive Testing
8. Rajratna Metals, Kalol, G’nagar
Rolling Pipes
9. Heavy Metal & Tubes
Chhatral, G’nagar
10. NML- Jamshedpur
11. TATA steel plant- Jamshedpur
12. Varmora vitrified tiles- Morbi
13. Sunheart vitrified tiles- Morbi
14. Icon Granito pvt.ltd. - Morbi
15. Royal touch aluminum, extrusion plant, changodar
16. Rajan technocast pvt.ltd.- Sapar veraval
17. Adroid tecchnocast pvt.ltd- sapar veraval
18. Bhavani forging- Rajkot
19. Arrow technocast pvt.ltd. sapar veraval
20. Sims and Simpolo plant- morbi
FINAL YEAR PROJECT:
(1) “INVESTIGATION ON UTILIZATION OF WASTE VITRIFISD CERAMIC MATERIAL.”
(2) “OPTIMIZATION OF PROCESS PARAMETER IN FLY ASH, CLAY AND ADDITIVES BONDED SYSTEM FOR MANUCACTURING CERAMIC MATERIAL.
SPECIAL ACHIVEMENTS:
“Awarded and Reported by GUJARAT SAMACHAR for my project “OPTIMIZATION OF PROCESS PARAMETER IN FLY ASH, CLAY AND ADDITIVES BONDED SYSTEM FOR MANUCACTURING CERAMIC MATERIAL
I have participated in extra - curricular activities and sports at school and college level. And I have NCC “A” certificate from 27 Gujarat battalion, Jamnagar in JUN-2006
And I also awarded by best sergeant (SGT) of the battalion in Jamnagar camp. And I have so many certificates and award during my primary and higher secondary school
MODEL COMPANY: A company where I can work freely in a professional environment, a company that recognizes my skill and assigns me to related and challenging projects and compensates my work with good rewards and perks.
COMPUTER:
Basic computer knowledge: Microsoft office, Internet, “C”, C++
SOFT SKILLS:
I am a good public speaker, I believe in sincere and hard work. Also a good listener, I abide by etiquettes and positive work ethics. I desire to learn and be trained and most importantly urge to improve constantly.
I hereby declare that the information given herewith is correct to my knowledge.
JITEN J. GADHAVI