Attended short-term courses / workshops/conferences etc., for continuing education:
S. No. / Name / Name of theSeminar / conferences/
Workshop etc.
Attended / Duration
From – To / Conducted by
CAYm2 :: 2007 – 08
01 / Prof. D.V.V. Krishna Prasad / One Day Seminar on
CAD/ CAM/ CAE Capabilities for the engineers in service Industry / 28 Nov 2007 / TATA Technologies at
VR Siddhartha Engineering College, Vijayawada during
02 / Sri M. Gopi Krishna / One Day Seminar on
CAD/ CAM/ CAE Capabilities for the engineers in service Industry / 28 Nov 2007 / TATA Technologies at
VR Siddhartha Engineering College, Vijayawada during
03 / Prof. V.C. Das / 23rd National Convention of Mechanical Engineers / 10 – 12
Sept. 2007 / Institution of Engineers, Hyderabad
04 / Prof. K. Ravindra / 23rd National Convention of Mechanical Engineers / 10 – 12
Sept. 2007 / Institution of Engineers, Hyderabad
05 / Sri P.V.S.M. Kumar / 23rd National Convention of Mechanical Engineers / 10 – 12
Sept. 2007 / Institution of Engineers, Hyderabad
06 / Sri G. Srinivasa Rao / “ International Conference on Modeling and Simulation” / 27- 29
Aug 2007 / Coimbatore Institute of Technology , Coimbatore
07 / Prof. K, Ravindra / ICAME – 2007 / 24 -26
Oct 2007 / MIT, Manipal
08 / Prof. V. C. Das / ICAME – 2007 / 24 -26
Oct 2007 / MIT, Manipal
09 / Sri D. Sameer Kumar / C A E – 2007 / 13 -15
Dec. 2007 / IITM,Chennai
CAYm1 :: 2008 – 09
10 / Sri B. Ravi Sankar / Role of Energy analysis in
Advanced Energy Systems for Reduced Global Warming, / 30-31
July 2008 / Vignan’s Engg College,
Guntur,
11 / Sri G.Chaitanya / “Induction training program
for Young Teachers “ / 25 – 26
July 2008 / ISTE Chapter
RVRJCCE, Guntur
12 / Sri K.Praveen Kumar / “Induction training program
for Young Teachers “ / 25 – 26
July 2008 / ISTE Chapter
RVRJCCE, Guntur
13 / Sri K. Krishna
Kishore / “Induction training program
for Young Teachers “ / 25 – 26
July 2008 / ISTE Chapter
RVRJCCE, Guntur
14 / Sri B.Ravisankar / “Induction training program
for Young Teachers “ / 25 – 26
July 2008 / ISTE Chapter
RVRJCCE, Guntur
15 / Sri M.Gopi Kishna / “Induction training program
for Young Teachers “ / 25 – 26
July 2008 / ISTE Chapter
RVRJCCE, Guntur
16 / Sri G.Kishore
Chowdari. / “Induction training program
for Young Teachers “ / 25 – 26
July 2008 / ISTE Chapter
RVRJCCE, Guntur
17 / Sri R.Srinivasulu / “Induction training program
for Young Teachers “ / 25 – 26
July 2008 / ISTE Chapter
RVRJCCE, Guntur
18 / Mrs. S.Radhika / “Induction training program
for Young Teachers “ / 25 – 26
July 2008 / ISTE Chapter
RVRJCCE, Guntur
19 / Sri D.Sameer
Kumar / “Induction training program
for Young Teachers “ / 25 – 26
July 2008 / ISTE Chapter
RVRJCCE, Guntur
20 / Mrs. D.Swapna / “Induction training program
for Young Teachers “ / 25 – 26
July 2008 / ISTE Chapter
RVRJCCE, Guntur
21 / Sri B.R.G. Reddy / One day workshop on
Mechatronics / 22 Aug 2008 / VR Sidhartha Enginnering. College, Vijayawada
22 / Sri G. Srinivasa Rao / School on Leadership Development Program Management Insight for Engineering Faculty for management Leadership / 30 June –
12 July
2008 / NIT,
Warangal
23 / Sri V. Rama Koteswara ERao / Computational Mechanics / 18 – 22 May 2009 / Dept. Mechanical Engg.
PVP Siddhartha Institute of Technology, Vijayawada
24 / Sri G. Kishore Chowdary / Computational Mechanics / 18 – 22 May 2009 / Dept. Mechanical Engg.
PVP Siddhartha Institute of Technology, Vijayawada
25 / Sri N. Govind / Computational Mechanics / 18 – 22 May 2009 / Dept. Mechanical Engg.
PVP Siddhartha Institute of Technology, Vijayawada
26 / Sri S. Vijay Kumar / Computational Mechanics / 18 – 22 May 2009 / Dept. Mechanical Engg.
PVP Siddhartha Institute of Technology, Vijayawada
27 / Sri D. Sameer Kumar / Computational Mechanics / 18 – 22 May 2009 / Dept. Mechanical Engg.
PVP Siddhartha Institute of Technology, Vijayawada
28 / Sri M. Siva Naik / Computational Mechanics / 18 – 22 May 2009 / Dept. Mechanical Engg.
PVP Siddhartha Institute of Technology, Vijayawada
29 / Sri N. Govind / Fracture Mechanics / 22 – 24
Feb 2009 / Pro SIM
Bangalore
30 / Sri K. Praveen Kumar / National workshop on
Composite Materials and Nanotechnology / 11- 15
March 2009 / Sir C.R.Reddy Engineering College, Eluru
31 / Sri K. Kishore Kumar / National workshop on
Composite Materials and Nanotechnology / 11 - 15
March 2009 / Sir C.R.Reddy Engineering College, Eluru
32 / Sri K. Praveen Kumar / National workshop on
Composite Materials and Nanotechnology / 11 - 15
March 2009 / Sir C.R.Reddy Engineering College, Eluru
33 / Dr. K. Ravindra / Workshop on
“Intelligent Manufacturing”
[under TEQUIP Networking program] / 16 -17
March 2009 / Dept of Mech. Engineering, A.U.College of Engineering, Visakhapatnam
34 / Dr. K. Ravindra / Workshop on
“Tool Design and its Applications”
[under TEQUIP Networking program / 20 - 21
March 2009 / Dept of Mech. Engineering, A.U.College of Engineering, Visakhapatnam
35 / Sri G. Srinivasa Rao / Meta Heuristics and their
applications in design, manufacturing and materials / 18 – 20
June, 2009. / Dept of Mech. Engineering, Vignan University,
Vadlamudi, Guntur
36 / Sri R. Srinivasulu / Meta Heuristics and their
applications in design, manufacturing and materials / 18 – 20
June, 2009. / Dept of Mech. Engineering, Vignan University,
Vadlamudi, Guntur
37 / Sri G. Chaitanya / Meta Heuristics and their
applications in design, manufacturing and materials / 18 – 20
June, 2009. / Dept of Mech. Engineering, Vignan University,
Vadlamudi, Guntur
38 / Sri D. Sameer Kumar / Meta Heuristics and their
applications in design, manufacturing and materials / 18 – 20
June, 2009. / Dept of Mech. Engg, Vignan University,
Vadlamudi, Guntur
CAY :: 2009 – 10
39 / Dr. K. Ravindra / A course on
“Innovate , Create , manufacture and Manage Digitally” / 06 - 10 July, 2009 / Indo –US Engineering Faculty Leadership Institute at Infosys Mysore center.
40 / Dr. V. C. Das / SERC School on
MICRO MACHINING / 20 – 25
July, 2009 / Department of Science & Technology, Govt. of India, New Delhi) at IIT Kanpur
41 / Sri B.R.G. Reddy / one day work shop on
3D modeling and design validation software: solid works, manufacturing solution and CAM works / 18 -08-2009 / CADD center, Chennai at V.R.Siddhartha Engineering College, Vijayawada
42 / Sri G. Chaitanya / one day work shop on
3D modeling and design validation software: solid works, manufacturing solution and CAM works / 18 -08-2009 / CADD center, Chennai at V.R.Siddhartha Engineering College, Vijayawada
43 / Sri K. Praveen
Kumar / one day work shop on
3D modeling and design validation software: solid works, manufacturing solution and CAM works / 18 -08-2009 / CADD center, Chennai at V.R.Siddhartha Engineering College, Vijayawada
44 / Mrs. K. Lakshmi
Chaitanya / one day work shop on
3D modeling and design validation software: solid works, manufacturing solution and CAM works / 18 -08-2009 / CADD center, Chennai at V.R.Siddhartha Engineering College, Vijayawada
45 / Sri. V. R.K. Rao / Induction training program for
Young Engineers / 7 – 8
Sept 2009 / ISTE Chapter
RVRJCCE, Guntur
46 / Sri. M. Siva Naik / Induction training program for
Young Engineers / 7 – 8
Sept 2009 / ISTE Chapter
RVRJCCE, Guntur
47 / Sri. S. Vijay
Kumar / Induction training program for
Young Engineers / 7 – 8
Sept 2009 / ISTE Chapter
RVRJCCE, Guntur
48 / Sri. K. Sreekanth / Induction training program for
Young Engineers / 7 – 8
Sept 2009 / ISTE Chapter
RVRJCCE, Guntur
49 / Sri. Ch. Devaraj / Induction training program for
Young Engineers / 7 – 8
Sept 2009 / ISTE Chapter
RVRJCCE, Guntur
2010-2011
50 / V.Ramakoteswara Rao / Interactive Workshop & Technology Appreciation Seminar on Mechatronics Applications / 5-6th August / V.R Siddhartha Engineering College, Kanuru, Vijayawada
51 / Dr.V.C.Das / QIP Short Course on Developing Tools for Biomedical Applications / 20-24 September, 2010. / IIT Gowhati
52 / Dr. G.Srinivasa Rao / Indo-Russian Joint Workshop On Computational Intelligence and Modern Heuristics in Automation and Robotics (CIMHAR) / September 20-22 ,2010 / SVNIT , Surat
53 / Dr.G.Srinivasa Rao / 4th International Conference on Advances in Mechanical Engineering ICAME / September 23-25,2010 / Sardar Vallabhai National institute of Technology(SVNIT) , Surat
54 / Sri. BRG Reddy / 4th International Conference on Advances in Mechanical Engineering ICAME / September 23-25,2010 / Sardar Vallabhai National institute of Technology(SVNIT) , Surat
55 / Sri. NVVS Sudheer / 4th International Conference on Advances in Mechanical Engineering ICAME / September 23-25,2010 / Sardar Vallabhai National institute of Technology(SVNIT) , Surat
56 / Sri. K.Praveen Kumar / 4th International Conference on Advances in Mechanical Engineering ICAME / September 23-25,2010 / Sardar Vallabhai National institute of Technology(SVNIT) , Surat
57 / Sri. BRG Reddy / International Conference on
“NANO Technology - Materials & Composites for Frontier Applications”
(NANOCON) / 14th & 15th October, 2010 / Bharathi Vidyapeeth Deemed University, Pune, India.
58 / Sri. Srinivas Chandana / 3rd International and 24th AIMTDR conference / December 13-15, 2010 / College of Engineering, Andhra University, Visakhapatnam
59 / Sri. B.Ramgopal Reddy / 3rd International and 24th AIMTDR conference / December 13-15, 2010 / College of Engineering, Andhra University, Visakhapatnam
60 / Dr. G.Srinivasa Rao / 3rd International and 24th AIMTDR conference / December 13-15, 2010 / College of Engineering, Andhra University, Visakhapatnam
61 / Dr. G.Srinivasa Rao / Pre Conference Workshop to 3rd International and 24th AIMTDR conference, “Challenges in Micro and Nano Manufacturing Indian perspective in the globalscenario” / December 11-12, 2010 / , College of Engineering, Andhra University, Visakhapatnam
62 / Sri. B.Ravi Shankar / Computational Fluid Dynamics / 18th March 2011 / L.B College of Engineering , Mylavaram
63 / Sri. C.Srinivas / International conference on Recent advances in Mechanical Engineering( INCRAME-2011) / April 21-22, 2011. / Dr.M.G.R. Educational and Research Institute, University, Chennai
64 / Sri. N.V.V.S. Sudheer / International conference on Recent advances in Mechanical Engineering( INCRAME-2011) / April 21-22, 2011. / Dr.M.G.R. Educational and Research Institute, University, Chennai
65 / Sri. N.V.V.S. Sudheer / National Conference on Design And Manufacturing (NaConDM2011) / 27-28, May 2011. / Indian Institute Of Information Technology Design And Manufacturing (IITD&M) Kancheepuram
66 / Dr. V.Chittaranjan Das / Advanced Numerical and Statistical Techniques for Engineers(ANSTE) / May 30th - June 03rd ,2011 / NIT Calicut
2011-2012
67 / Smt. M. Vijaya / Finite Element formulations for Nano Structures / 19th – 20th August,2011 / V.R Siddhartha Engineering College, Kanuru, Vijayawada
68 / Sri. V.Tarachand / National Conference on Recent Advances in Mechanical Engineering(NCRAME-2011) / 7th -8th July2011 / R.V.R & J. C College of Engineering , Guntur
69 / Dr. G.Srinivasa Rao / National Conference on Recent Advances in Mechanical Engineering(NCRAME-2011) / 7th -8th July2011 / R.V.R & J. C College of Engineering , Guntur
70 / Dr. V.Chittaranjan Das / National Conference on Recent Advances in Mechanical Engineering(NCRAME-2011) / 7th -8th July2011 / R.V.R & J. C College of Engineering , Guntur
71 / Sri. D.Sameer Kumar / National Conference on Recent Advances in Mechanical Engineering(NCRAME-2011) / 7th -8th July2011 / R.V.R & J. C College of Engineering , Guntur
72 / Sri. C.Tarasasanka / National Conference on Recent Advances in Mechanical Engineering(NCRAME-2011) / 7th -8th July2011 / R.V.R & J. C College of Engineering , Guntur
73 / Sri. V.Rama Koteswara Rao / National Conference on Recent Advances in Mechanical Engineering(NCRAME-2011) / 7th -8th July2011 / R.V.R & J. C College of Engineering , Guntur
74 / Sri. Ch. Devaraj / National Conference on Recent Advances in Mechanical Engineering(NCRAME-2011) / 7th -8th July2011 / R.V.R & J. C College of Engineering , Guntur
75 / Dr. K.Srinivas / National Conference on Recent Advances in Mechanical Engineering(NCRAME-2011) / 7th -8th July2011 / R.V.R & J. C College of Engineering , Guntur
76 / Sri. V.Tarachand / Induction training program for
Young Faculty / 6-7th
September
2011 / R.V.R & J. C College of Engineering , Guntur
77 / Sri. C.Tara Sasanka / Induction training program for
Young Faculty / 6-7th
September
2011 / R.V.R & J. C College of Engineering , Guntur
78 / Sri. M.Vijaya / Induction training program for
Young Faculty / 6-7th
September
2011 / R.V.R & J. C College of Engineering , Guntur
79 / Sri. Ch. Devaraj / Induction training program for
Young Faculty / 6-7th
September
2011 / R.V.R & J. C College of Engineering , Guntur
80 / Dr. V.Chittaranjan Das / Advanced Engineering Optimization through Intelligent Techniques / 2nd -6th January,2012 / Sardar Vallabhai National institute of Technology(SVNIT) , Surat
81 / Sri. SrinivasChandana / ISCI-2012 (International Simulation Conference of India) / 2-4 February 2012 / by IIT Bombay
82 / Sri. K.Praveen Kumar / National Conference on Advances in Materials in Engineering(MATERIAUX-2K12) / 24-25th Feb 2012. / Andhra University , Visakhapatnam
83 / Sri. V.Tara Chand / Theoretical and Computational Fluid Dynamics / 10th – 14th March, 2012 / Department of Applied Mechanics and Department of Mechanical Engineering, IIT Madras