Case CATalyst Edit Features – Part 1

Most reporters and scopists use only a fraction of the features and options available in Case CATalyst Edit that can make editing faster, easier and more accurate. In this class, you’ll learn about Edit features that are new in Version 16 along with some features introduced in earlier versions that make a huge difference in terms of editing ease and efficiency.

Presented by Larry Paiz

www.reportertraining.com

Case CATalyst Edit Features – Part 1

Xtra Global Table and Apply Xtra Global Table 3

Remove Suffix 3

Redact and Redact Options 3

Keyboard Map Efficiency 5

Audio Tips for Edit 7

Define Dialog Shortcuts 11

Quick Suggest 13


Xtra Global Table and Apply Xtra Globals Command

When editing transcripts, some reporters and editors find themselves re-globaling the same steno or text over and over, because wherever the previously globaled item was located, in a dictionary or a global table, it was not selected for translation.

A new option, Add to Xtra Global Table is available in all global dialogs and enables you to send steno and/or text globals that you never want to have to re-define or search for in one or more other files’ global tables so that they can be applied after translation. You can add a global to the Xtra Global Table when you define, and apply all Xtra Globals via the new Apply Xtra Globals command in Edit.

·  To add a global to the Xtra Global Table, select the Add to Xtra Global Table (Alt+ x) option. This will send the global to the Xtra global table as well as to the target dictionary and the current job’s global table.

·  To apply the Xtra Global table to a job when editing, just click Global, Apply Xtra Global Table (Alt+g, x).

Remove Suffix

This is an edit command that lets you remove a suffix from the end of a root word. If there’s more than one suffix, it will remove the suffixes one at a time.

If the reporter mis-strokes and adds in one or more suffixes that aren’t required and need to be removed, the most common way of editing out the unwanted suffix is to position the cursor at the end of the word, press backspace as many times as needed, and then type the correct spelling of the root word. Obviously this is time-consuming and inefficient. With this new feature, you can use one command for each suffix to be removed.

1.  Position the cursor on a word which has one or more unwanted suffixes.

2.  Click Special Edit, Fix Words, Remove Suffix (Alt+s, w, r).

Redact and Redact Options

Some jurisdictions require court reporters to edit sensitive information before releasing the transcript to the public. Sensitive information may include social security numbers, the full name of a juvenile, date of birth, etc. When text is surrounded with Redaction On> and <Redaction Off> format symbols, the text is hidden when printing (to hard copy or PDF) or exporting to ASCII, HTML, PTX, PTF, CaseViewNet, TextMap and/or RTF/CRE. The hidden portion replaces the original text and takes up the same amount of space as the original text. Line spacing and line breaks are unaffected.

·  To redact text:

1.  Mark the text to be redacted.

2.  Click Special Edit, Fix Words, Redact (Alt+s, w, d).

·  To set the appearance of redacted text:

1.  Click Tools, Options, Advanced Edit… (Alt+t, o, a).

2.  Scroll down to, and then click Redacted text displays as.

3.  Click the down arrow at the end of the row, and then select the preferred display option.

?  NOTE: The appearance of the hidden (redacted) text is also dependent upon the delivery format for the file:

Redacted Text Displays As
Setting / REDACTED TEXT APPEARS IN DELIVERY FORMAT AS:
Print to Hard Copy / Print to PDF / Export to RTF/CRE / Export to ASCII / Export to HTML / Export to PTX / Export to PTF / Export to TextMap / Export to
Case
View
Net
Black
rectangle / / / ( ) / ( ) / ( ) / ( ) / ( ) / ( ) / ( )
Lines / (///) / (///) / (|||) / ( ) / ( ) / ( ) / ( ) / ( ) / (|||)
White space / ( ) / ( ) / ( ) / ( ) / ( ) / ( ) / ( ) / ( ) / ( )
X’s / (XXX) / (XXX) / (XXX) / (XXX) / (XXX) / (XXX) / (XXX) / (XXX) / (XXX)

4.  Click OK (Enter).

Keyboard Map Efficiency

·  Add Shortcuts

If there is an Edit function you use frequently that does not currently have a shortcut key, you should assign a shortcut key.

1.  Open the keyboard map by any one of the following methods:

ü  In Manage Jobs, double click the System Files case and then double click the keyboard map file.

ü  In Edit, double click the keyboard map name (listed on the status bar, as Kbd Map:name).

ü  From anywhere in Case CATalyst, click File, Open, List/Table, Keyboard Map (Alt+f, o, i, k), select the keyboard map file and click Open (Enter).

2.  Scroll down and select the key to which you want to assign the function.

3.  Open the Assign Key to Function dialog by any one of the following methods:

ü  Double click the key.

ü  Right click the key and then click Modify.

ü  Click Edit, Modify… (Enter or Ctrl+m).

ü  Click the Modify button on the toolbar.

4.  Select the function from the list.

?  NOTE: There are two techniques that enable you to find functions quickly. You can click Filter by Category and then select the desired category, or you can press Ctrl+f and search for the function name.

5.  Click Assign (Alt+a).

6.  Click Close (Alt+c).

7.  Save the changes to the keyboard map. Do one of the following:

ü  If you wish to save the keyboard map to a new name, one that
identifies it as your, personal, custom keyboard map, click
File, Save As (Alt+f, a).

C  TIP: If you add, modify, or delete functions from the Stenograph-provided Default, CAT4 kbd, Extras Default or Extras CAT4 kbd keyboard map, it is recommended that you use Save As and rename the keyboard map.

ü  If you wish to save the keyboard map to the current name, do one of
the following:

§  Right click the keyboard map open file tab and select Save.

§  Click File, Save (Ctrl+s).

§  Click the Save button on the toolbar.

·  Remove or Modify Unwanted Function Assignments

If there is a function assignment that is inconvenient to you or slows your editing speed, you should remove or modify the assignment.

1.  Scroll down to and select the key you want to modify or delete.

2.  If you want the key to do nothing, press Delete. This removes the current function assignment.

For example: Some reporters and scopists dislike having the Insert key assigned to Toggle Insert/Overstrike; they would prefer to always remain in Insert mode and never overstrike other text. Deleting the Toggle Insert/Overstrike function and then saving the changes means that pressing the Insert key would do nothing when editing in Case CATalyst.

?  NOTE: Changing a function assignment in Case CATalyst does not affect a key’s behavior in any other application.

3.  If you want the key to do a different function than is currently assigned, open the Assign Key to Function dialog by any one of the following methods:

ü  Double click the key.

ü  Right click the key and then click Modify.

ü  Click Edit, Modify… (Enter or Ctrl+m).

ü  Click the Modify button on the toolbar.

4.  Select the preferred function from the list.

5.  Click Assign (Alt+a).

6.  Click Close (Alt+c).

7.  Save the changes to the keyboard map.

C  TIP: As with any files you customize to your preferences, after making any changes to a keyboard map, it is highly recommended that you back up the modified keyboard map file. When you need to install Case CATalyst on a new computer, being able to restore the backup ensures that you can remain as efficient and productive as you were on your previous system.

Audio Tips for Edit

·  Stop Audio When Dialog Opens


You can set an option within Case CATalyst to automatically stop audio playback when opening a dialog box and automatically resume playing when the dialog box is closed.

1.  Do one of the following:

ü  From Manage Jobs, click Tools, Options, Edit, Advanced Edit (Alt+t, o, e, a).

ü  From Edit, click Tools, Options, Advanced Edit (Alt+t, o, a).

2.  Locate the Stop audio when dialog opens option and click the down arrow at the end of the row.

Select Yes and audio will stop while the dialog is open. Audio will resume playing from the current cursor position when the dialog closes.

Select No and audio will continue to play while the dialog is open.
You will have to use the Stop Audio command to cause audio to
stop playing.

·  Set Audio Delay

By default, audio plays from a point approximately three seconds previous to the timestamp at the current cursor position. This enables you to hear a bit of context rather than play the audio that exactly matches the timestamp of the current cursor position.
If you prefer to begin playback closer to the current cursor position, or to increase the amount of context heard before the current cursor position, you can adjust the number of seconds in the Set Audio Delay dialog.

ü  Do one of the following:

§  Click Tools, Audio, Set Audio Delay (Alt+t, a, u).

§  Click Tools, Options, Set Audio Delay (Alt+t, o, u).

ü  Type the number of seconds preferred for the audio delay.

§  Type a lower number to begin playback closer to the current cursor position.

§  Type a higher number to hear additional context before the current cursor position.

ü  Click OK (Enter).

·  Play Audio with Scroll Text
Combine audio playback with the automated Scroll Text Forward cursor movement function.

ü  Click Tools, Audio and then click Play Audio with Scroll Text
(Alt+t, a, x).

ü  To stop audio, move the cursor via any navigation key or point and click in the transcript.

? NOTE: The speed at which text scrolls is controlled by the speed of the audio playback. The Scroll Text Speed option in the Tools, Scroll Text menu does not affect Play Audio with Scroll Text.

·  Steps to Work with Externally Recorded Audio

When you have audio that was provided by a videographer in MP3 or Windows media or some other audio format, it may be possible (with the help of a third-party audio file conversion software application such as Audacity® or NCH® Switch Audio File to convert the audio file to the correct type of WAV format, associate it with a timestamped transcript in
Case CATalyst. The synchronization will not be as accurate as audio recorded on the same machine as the steno and will likely require adjustment.

1. Convert the file to a 16-bit PCM .WAV file.

?  NOTE: If you wish to associate a .WAV file from a Diamante, Mira or Fusion (for example, if the computer’s audio is poor and the writer’s audio is better, but a lot of realtime editing was performed and you do not wish to re-translate the job to ensure top quality synchronization but have to re-do some editing), there is no need to convert it prior to associating the file. Move directly to step 2.

?  NOTE: The following instructions describe how to use the free Audacity file conversion software to convert an MP3 file to a 16-bit PCM WAV file. If the file is a different audio format, it may require a different audio file conversion program or slightly different steps. Stenograph does not endorse or recommend or offer technical support for any one particular audio file conversion software application.

a.  Open the audio conversion software (e.g. Audacity).

b.  Import the audio file. In Audacity, you would click File, Import, Audio (Ctrl+Shift+i), then browse to and select the MP3 file provided by the videographer.

c.  Export the audio file. In Audacity, when the file has finished importing, click File, Export (Ctrl+Shift+e).

In Audacity, in the Export dialog, at “Save In:” browse to C:\CAT4\USR\YOUR USER NAME (using your actual user name) and save the file in the same location as your job. (Optional: If desired, you can also rename the MP3 file to the same name as your job at this time. This is not necessary but can make it easier to know which file to select when associating the audio with the transcript, especially if you have more than one audio file at that location).

At “Save As Type” select WAV (Microsoft) 16-bit PCM, then click Save, and then click Okay. (If using a program other than Audacity, save the audio into a 16-bit or 8,000 Hz/PCM format .WAV File.)

d.  Close the audio conversion software. In Audacity, when prompted to save changes before closing, select No. You don’t need to keep a copy in Audacity format.

2. Associating the File in Case Catalyst.

a.  Open Case CATalyst, and open the job in Edit.

b.  Click Tools, Audio, Associate Audio File...

c.  Select the file you just converted, and click Open.

d.  When asked – “Was this audio file recorded using Case CATalyst?” select No.

3.  Syncing the File.

?  IMPORTANT NOTE: Before beginning these next steps, make sure to assign the EZ Sync at Cursor function to a shortcut key in your keyboard map. This will ensure more accurate sync results, vs. selecting this tool from a menu (i.e. clicking Tools, Audio, EZ Sync at Cursor) because you can access the command more quickly. In the Extras - Default and the
Extras - CAT4 kbd keyboard maps, the = symbol is assigned to EZ Sync at Cursor.)