JM WEED WASTER – SPONGE WIPER 15’ OR 30’ PULL TYPE
FEATURES:
- HEAVY DUTY CONSTRUCTED FRAM (HEAVIEST FRAME ON THE MARKET)
- UNIVERSAL JOINT WELDED TO FRAME (NOT BOLTED ON)
- HEAVY DUTY WHEELS WITH ¼” SPOKES
- HEAVY DUTY MO-PED TIRES & THORN RESISTANT TUBES
- 2” BALL COUPLER (for a smoother pull)
- ADJUSTABLE HITCH FOR ROW OR SOLID SOYBEANS, HAY CROP, ETC.
- OFFSET HITCH ALLOWS YOUTO USE ATV OR TRACTOR IN ROW CROPS, KEEPS WIPER WHEELS OFF CROPS
- FULL RANGE HEIGHT ADJUSTMENT
- PROVEN SPONGE WIPING SYSTEM – 3” CELLULOSE SPONGE WITH PROTECTIVE OUTER SKIN, SURROUNDED BY NYLON NET FOR LONGER LIFE OF SPONGES
- SPONGE WILL STAY WET – NO GUESSING IF IT’S TOO WET OR DRY (like other brands)
- PUTS THE HERBICIDE WHERE YOU WANT IT
- 12 GALLON POLY TANK – yellow tank– red frame
- 6 NEEDLE VALVES ON 30’ OR 3 NEEDLE VALVES ON 15’
- IN-LINE STRAINER – helps keep the system clean
- TANK SHUT OFF VALVE – when unit is not in use, also use as a tank drain
- FOLDS FOR EASY TRANSPORTATION OR STORAGE – 15’ folds in 5’ sections, 30’ folds in 10’ sections
- CRISS-CROSSES OVER BACK CENTER SECTION, FOLDS UP INTO CARRIER ARMS
LET THE JM WEED WASTER WASTE THOSE WEEDS AWAY
USES: SMALL CORN OR ANY ROW CROPS, SOLID SEEDED SOYBEANS, COTTON, SUGAR BEETS, CRP, WHEAT, SPECIALTY CROPS, BERMUDA GRASS, TURF GRASS, HAY, PASTURES & ETC.
EXCELLENT CONTROL OF: SERICEA LESPEDEZA, MUSK THISTLE, HEMP DOG BANE, MILK WEED, MARES TAIL, CANADIAN THISTLE, HORSEWEED, TALL WATER HEMP, WILD RYE IN WHEAT, VOLUNTEER CORN, JOHNSON GRASS CONTROL, RED RICE, ETC
LEVEE LEAPER
Patented
THE LEAVEE LEAPER HAS AN ADJUSTABLE STOP TO PREVENT THE LEADING WHEELS FROM HITTING THE FURROW WALL. LL AXLE DESIGN PREVENTS DRAGGING. PULLING VEHICLE IS UP AND OVER AND OUT OF THE FURROWS BEFORE IT BEGINS TO PULL THE SPRAYER OVER THE LEVEE
-50” – 60” SELF-LEVELING BOOM
- HIGH FLOTATION TIRES
- ELECTRONIC RATE CONTROLLER ADJUST THE SPRAY RIG ON THE GO
- FOAM MARKER
- ELIMINATES SHOVEL WORK, NO WHEEL TRACKS IN SOFT LEVEES
- NO MORE WAITING FOR THE WIND TO DIE DOWN
- SPRAY IN THOSE HARD TO REACH PLACES, THAT THE AIRPLANE COULD NEVER REACH
- ALSO WORKS GREAT FOR ROW CROPS, BURNDOWN & ETC.
200 – 300 + RICE ACRES/DAY & 300-400 AC. BURNDOWN & POST (LITTLE TO NO DRIFT) NO WIND MPH LIMIT LIKE AERIAL BURNDOWN
LEVEE LEAPER SPRAYER
-GENERAL SPECIFICATIONS 47.5’ OR 50’ SELF-LEVELING FOOT BOOM
*ADJUSTABLE WIDTH LEVEE LEAPER AXLES. ADJUSTS FROM 90” TO 120” CENTERS, NO TELESCOPING TUBE WITHIN TUBE TO RUST OR BIND EXTERNAL CLAMPING (PREVENTS BINDING)
*COMFORT CRANK ADJUSTABLE BOOM HEIGHT (23” UP & DOWN STROKE)
*SIDE SWING BOOM
*SPRAYING SYSTEMS DIAPHRAGM CHECK VALVE QUICK TEE-JET NOZZLE BODIES (NO DRIP) WITH QUARTER TURN QUICK TEE-JET SNAP CAPS
*BEAN BLASTER, TWIN JET TIPS, SPRAYS TWO FLAT FAN PATTERNS, ONE 30 DEGREES FORWARD, ONE 30 DEGREES BACKWARDS FOR DOUBLE COVERAGE 110 DEGREE ANGLE TIP FOR 100 % OVERLAP RESULTS IN FOUR ANGLES OF ATTACK ON 30” CENTERS, “TAKES ADVANTAGE OF THE CHISEL EFFECT”. UNBELIEVABLE COVERAGE MAKES THE BEAN BLASTER EXCELLENT FOR ALL POST PRODUCTS AND BURNDOWN WORK. ALL STAINLESS TIPS.
*SELF-LEVELING BOOM W/ CAST IRON HINGES (FOR LONG LIFE)
*HONDA 5.5 HP ENGINE W/650 ACE HIGH CAPACITY PUMP
*MUD SHIELD, KEEPS MOTOR DRY IN WET FIELDS
*ELECTRIC SOLENOID VALVES (LOW AMP) LEFT, CENTER AND RIGHT
*EACH BOOM SECTION IS CENTER FED (NO NOZZLE STARVING)
*150 OR 200 GALLON RAVEN – POLY DEEP SUMP TANK
*WIDE OPEN TEE AGITATION SWEEPS ACROSS TANK BOTTOM W/ FULL TIME VIGOROUS AGITATION (EXCELLENT FOR ALL TYPES OF CHEMICALS)
*LIQUID ONLUY STRAINED UPON NOZZLE DELIVERY (DOES NOT HAMPER AGITATION OF HEAVY SOLUTIONS). NYLON STRAINER WITH STAINLESS STEEL SCREEN
*TIRE SIZE 25” X 12” X9” – ATV HIGH FLOTATION TIRES
*2 INCH BALL COUPLER HITCH & SAFETY CHAIN W/ GREASE ZERK (KEEPS BALL GREASED WHILE HOOKED UP)
*ADJUSTABLE HITCH HEIGHT *FED FRAME – YELLOW TANK *CLEAN WATER TANK
OPTIONAL EQUIPMENT
*MICRO TRACK MT-3405 SPRAY CONTROLLER OR 844 TEE JET SPRAY CONTROLLER
*FOAM MARKER
*TEE JET GUIDELINE GUIDANCE SYSTEM
JM SQUARE DEAL SPRAYER
- STANDARD EQUIPPED WITH FOLLOWING FEATURES
- 3.5 H.P. BRIGGS MOTOR
- ACE CENTRIFUGAL CAST IRON PUMP – GE 100A MODEL
- NYLON STRAINER W/STAINLESS STEEL SCREEN
- 150 GAL. SQUARE TANK
- WIDE OPEN TEE AGITATION
- 2 ELECTRIC SOLENOID VALVES (low amp. Draw) LEFT, RIGHT
- 32.5’ TRUSS TYPE BOOM
- BOLT – ON BOOM – CENTER SECTION – HEIGHT ADJUSTMENT
- 30” NOZZLE BODY SPACING – 110 DEGREE FLAT FAN – PLASTIC TIPS
- TEE JET NOZZLE BODIES W/ DIAPHRAGM CHECK VALVES (no drip)
- ADJUSTABLE HITCH HEIGHT
- ADJUSTABLE AXLES STRADDLES 2-30” OR 3-30” ROWS
- MUD SHIELD, KEEPS MOTOR DRY
- 25”X12”X9” ATV HIGH FLOTATION TIRES
- ON-OFF SWITCH BOX W/ MASTER SWITCH & LEFT-RIGHT
- 2” BALL COUPLER
- TANDEM AXLE
- RED FRAME
OPTIONAL EQUIPMENT
-CALC-AN-ACRE ACCURATE ACRE COUNTER & DIGITAL SPEEDOMETER
-MT-3405 SPRAY CONTROLLER OR 844 TEE JET SPRAY CONTROLLER
-FOAM MARKER AND MOUNTING BRACKET
-5.5 H.P. HONDA MOTOR
-650 ACE CENTRIFUGAL PUMP
-WIDE SPACING FLOODS FOR TOP DRESSING NITROGEN ON WHEAT – --TEEJET NOZZLE BODIES & STAINLESS FLOOD TIPS (different flood tip sizes available)
-HANDWAND & HOSE w/hose bracket
-3rd SOLENOID – CAN BE ADDED TO SPLIT THE BOOM INTO 3 SECTIONS, OR FOR USE WITH A HANDWAND
JM ATV MINI FLOATER SPRAYERS BOLT-ON BOOM SERIES
STANDARD FEATURES
-150-200 GALLON RAVEN DEEP SUMP ROUND TANK
-WIDE OPEN TEE AGITATION, SWEEPS ACROSS TANK BOTTOM W/FULL TIME VIGOROUS AGITATION
-5.5 H.P. HONDA MOTOR
-ACE CENTRIFUGAL CAST IRON PUMP W/VITON SEALS – 650 HIGH CAPACITY PUMP
-ELECTRIC SOLENOID VALVES (LOW AMP DRAW)
-NYLON STRAINER WI/ STAINLESS STEEL SCREEN
-LIQUID STRAINED ONLY UPON NOZZLE DELIVERY
-EACH BOOM SECTION CENTER FED (NO NOZZLE STARVING)
-BOLT-ON BOOM – HEIGHT ADJUSTMENT
-32.5’ TRUSS-TYPE BOOM, OR 47.5’ OR 5-‘ SELF-LEVELING BOOM – W/ CAST HINGES, SIDE FOLDS
-QUICK TEE JET NOZZLE BODIES W/ DIAPHRAGM CHECK VALVES (NO DRIP)
-QUICK TEE JET CAPS – QUARTER TURN LOCKS TIP INTO PLACE
-BEAN BLASTER DOUBLE PLUMBED TURBO FLOOD JET, AND 110 DEGREE FLAT FAN twin jet stainless tips
-ADJUSTABLE HITCH HEIGHT (KEEPS SPRAYER RUNNING LEVEL & WEIGHT ONTO HITCH OF PULLING VEHICLE)
-ADJUSTABLE AXLES 90” TO 120” W/ EXTERNAL CLAMPING
-2” BALL COUPLER W/ GREASE ZERK (KEEPS BALL GREASED WHILE HOOKED UP)
-QUICKFILL
-MUD SHIELD KEEPS MOTOR DRY
-25”X12”X9” ATV HIGH FLOTATION TIRES
-CLEAN WATER TANK (hand wash tank)
-RED FRAME
-YELLOW TANK
EASY PUMP PRIMING – COMPLETE TANK DRAINAGE WHEN COMPARED TO SQUARE DEAL SPRAYER ALL THESE FEATURES AT A PRICE ONLY SLIGHTLY ABOVE THE SQUARE DEAL SPRAYER
OPTIONAL EQUIPMENT
-JMK GOOSENECK HITCH – NAILS SPRAYER AND PULLING VEHICLE TO GROUND, GIVES SOLID STABILITY (FOR GEO TRACKER, SUZUKI SAMURAI, SMALL PICK-UP TRUCKS, 6X6, POLARIS RANGER, JD GATOR, ETC.)
-FOAM MARKER
-TEE JET GUIDELINE GUIDANCE SYSTEM
-MT-3405 SPRAY CONTROLLER OR 844 TEE JET SPRAY CONTROLLER
-CACL-AN-ACRE ACCURATE ACRE COUNTER & DIGITAL SPEEDOMETER PROVIDES TRUE GROUND SPEED
-15” WIDE RUBBER BELTED TRAK – CONTINUOUS LOOP (PUTS A LARGE FOOTPRINT DOWN)
-SPECIAL TIRES REQUIRE SPECIAL OPTIONAL LEVEE LEAPER AXLES – 60” TO 90” OR 90” TO 120”
JM MINI-FLOATER SPRAYER
DELUXE MODEL SPECIFICATIONS 45/47.5/50/60 FOOT BOOMS
60’ HYDRAULIC FOLD WITH 30” HYDRAULIC BOOM HEIGHT ADJUSTMENT
- ADJUSTABLE WIDTH RIDGE RISER AXLES, ADJUST FROM 90” TO 120” CENTERS, NO TELESCOPING TUBE WITHIN TUBE TO RUST OR BIND EXTERNAL CLAMPING (prevents binding)
- COMFORT CRANK ADJUSTABLE BOOM HEIGHTS (23” UP & DOWN STROKE). 45’ TO 50’ TO 60’ BOOM
- 60’ HYDRAULIC FOLD BOOM – FOLDS COMPLETELY FROM CAB W/ PUSH BUTTON CONTROL
- SIDE FOLD BOOM. 45’ TO 50’ TO 60’ BOOM – manual fold
- SPRAYING SYSTEMS DIAPHRAGM CHECK VALVE QUICK TEE – JET NOZZLE BODIES (NO DRIP). W/2 LB. CAPS (FAST RESPONSE)
- QUARTER TURN QUICK TEE – JET SNAP ON CAPS. BOOMS DOUBLE PLUMBED. WIDE SPACING TURBO FLOODS FOR PRE-EMERGE WORK & LARGER TIPS AVAILABLE FOR TOP DRESSING NITROGEN ON WHEAT. TURBO FLOOD TIPS ARE AIMED AT TARGET AT A 45 DEGREE ANGLE FOR RESIDUE PENETRATION.
- BEAN BLASTER, TWIN JET TIPS, SPRAYS TWO FLAT FAN PATTERNS, ONE 30 DEGREES FORWARD ONE 30 DEGREES BACKWARDS FOR DOUBLE COVERAGE 110 DEGREE ANGLE TIP FOR 100% OVERLAP RESULTS IN FOUR ANGLES OF ATTACK ON 30” CENTERS, UNBELIEVABLE COVERAGE MAKES THE BEAN BLASTER EXCELLENT FOR ALL POST PRODUCTS, FOLIAR FEED & BURN DOWN. QUICK CHANGE BETWEEN FLOOD AND BEAN BLASTER. QUICK JET STAINLESS TOPS.
- SELF-LEVELING BOOM W/ CAST IRON HINGES (FOR LONG LIFE)
- HONDA 5.5 HP ENGINE W/650 HIGH CAPACITY PUMP
- ALL BOOM SIZES FEATURE SAFETY BREAK AWAY
- MUD SHIELD, KEEPS MOTOR DRY IN WET FIELDS
- ELECTRIC SOLENOID VALVES (LOW AMP) LEFT, CENTER, AND RIGHT
- EACH BOOM SECTION IS CENTER FED (NO NOZZLE STARVING)
- 150 OR 200 GALLON RAVEN – POLY DEEP SUMP TANK
- WIDE OPEN TEE AGITATION, SWEEPS ACROSS TANK BOTTOM W/ FULL TIME VIGOROUS AGITATION (EXCELLENT FOR ALL TYPES OF CHEMICALS)
- LIQUID ONLY STRAINED UPON NOZZLE DELIVERY (DOES NOT HAMPER AGITATION OF HEAVY SOLUTIONS)
- NYLON STRAINER WITH STAINLESS STEEL SCREEN
- TIRE SIZE 25”X12”X9” – ATV HIGH FLOTATION TIRES
- 2 INCH BALL COUPLER, & SAFETY CHAIN WITH GREASE ZERK (KEEPS BALL GREASED WHILE HOOKED UP)
- ADJUSTABLE HITCH HEIGHTS
- RED FRAME – YELLOW TANK
- CLEAN WATER TANK
OPTIONAL EQUIPMENT
-GOOSENECK HITCH AVAILABLE FOR GEO TRACKER, PICK-UPS, 6X6, POLARIS RANGER, & JD GATOR
-SPECIAL TIRES REQUIRE SPECIAL OPTIONAL LEVEE LEAPER AXLES -60” TO 90” OR 90” TO 12”. HIGH PROFILE BAR TIRES FOR 15” ROWS (WORKS GREAT FOR FOLIAR FEED & ROUNDUP) OR LOW PROFILE RADIAL TIRES FOR FLOTATION.
-MT-3405 SPRAY CONTROLLER OR 844 TEE JET SPRAY CONTROLLER
-FOAM MARKER
-TRACKS AVAILABLE
-TEE JET GUIDELINE GUIDANCE SYSTEM